注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

HobbyKing X930玻璃纤维Octocopter框架895毫米

HobbyKing X930玻璃纤维Octocopter框架895毫米

QTY:

Now save 保存 AU$ 21.06 AU$ 21.06

Special Price AU$ 26.09 AU$ 26.09

You save 保存 AU$ 21.06 AU$ 21.06

Was  AU$ 47.15

Rating:
Stock:
重量:
1326
SKU:
9171000117

Price War

产品介绍

该HobbyKing X930 oc​​tocopter框架是一种高品质的玻璃纤维框架,同时提供伟大的外观和性能。在X930的重量轻但极为坚固的玻璃纤维和铝合金建造,提供节省重量和力量的完美结合。

这个框架是从我们已经流行的“X”系列飞行器帧得到的,具有在OCTO配置类似结构和造型,但现在。这是一个HobbyKing独有的,这意味着你不会找到任何其他地方!

一个OCTO配置的加入提升能力使这个框架适用于携带更大的有效载荷,如摄像系统等电子元器件。这使得一个特殊的摄像机支架或只是特技飞行一个非常灵活和强大的多转子架!

在X930拥有一个非常漂亮的完成了2mm厚的玻璃纤维主框架,1mm厚方形铝武器,重型伸展高度起落橇和僵化的玻璃纤维电机坐骑。这octocopter框架坚固耐用,随时携带一个严重的负载!

我们提供全系列的多旋翼电子设备,如多旋翼控制板,ESC,电机和更多的,所以它从未如此简单或更实惠,在空中获得的多旋翼飞行器!

所有必要的硬件是包括在内。

眼镜:
宽度:895毫米
汽车螺栓孔: 一十九分之十六个/ 25mm
车架重量:916克(W /出电子)

需要:
多旋翼控制板
15〜25A无刷电调×8
28-XX / 35-XX无刷电机×8
10〜12英寸的螺旋桨 - 4标准/ 4反转
2650〜3600mAh的3〜4S lipoly
你自己的4通道发射机/接收机

Product
Specifications

额外信息

  • 商品编号:
    9171000117
  • Brand:
    HobbyKing
  • 重量(g)
    1326.00
  • 长度
    435.00
  • 宽:
    75.00
  • 高度:
    210.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
excellent frame let down by the lack of a second deck but that said its very simple to achieve with the use of a few stand-offs and for example a glassfibre battery carrier wich is what i used but for the pricwe EXCELLENT VALUE FOR MONEY WELL THOUGHT OUT VERY LIGHT FOR ITS SIZE BUT IT REALLY IS A TRUE BUILDERS KIT AND WHILST A BEGINER COULD ASSEMLE IT TOO MUCH IS LEFT TO THE BUILDER TO WORK OUT FOR EXAMPLE MOTOR AND PROP SET UP AND THE SECOND DECK ALL IN ALL EXCELLENT IVE SEEN THEM FLOWN WITH ANYTHING FROM A 2212 MOTOR UPTO A E600 FROM DJI
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok where to start.....
Assembly - Instruction lol there are none unless you call a picture of the parts instruction.
It is pretty much straight forward however.
The fit is horrible! plan on using some epoxy and some extra fasteners on some area's.
I read on the International site that the motor mounts are the worst part.
I will use the stock ones but have found aluminum ones on EBay for like $35 for a set of 8
The directions show the mounts on top of the arms but the video and photos here have them mounted below..... I guess its preference but I may mount my mounts on the bottom.
I'm waiting on motors I plan on using Emax XA2212 820KV w/ 10or 11'' props.... I am going to try 2 EMAX 4in1 ESC's but may switch to individual ones if the don't work well.
I'll let you know how it flys when its all together... Oh and I have a NAZA Lite Flashed w/ V2 for a Flight Controller
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
WOW Riesig

Verarbeitung naja - ein bisschen hier und da nachschleifen musste schon sein
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a cool frame, I'm pretty sure the only octocopter frame on hobbyking. The only problem I have with it is that the legs don't actually fit into the frame. I had to sand them down and they still barely fit in. Then on the bottom of the frame the little skid things are so lose they fall off every other time I pick the thing up. It wasn't a hard fix, some hot glue did the job as the only hard force they will be experiencing is when they get pushed INTO the frame, not out, when I land but it was rather annoying to have to sand and hot glue the thing together. Don't let this turn you off it, it's a great frame and I would buy it again, it's only just shy of brilliant!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Incredible frame for the price! I have about 10 flights now and here is what I have seen: motor mounts need reinforcing....I built my own by tracing the original mounts on aluminum plating and cut out...soo much better. The originals began vibrating and flexing. I could see cracks forming so better safe then sorry! While assembling the frame I wish I had used glue as well because skids and legs are beginning to loosen. The skids IMO need to be wider and longer....if the ground isn't perfectly level the copter can easily tilt over onto the props. I'm planning some more mods in the near future. Overall, great for what you are paying....just watch out on those motor mounts!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an outstanding kit frame for the price. It's also HUGE! I'm pretty sure this won't fit in the trunk of my Audi without some dis-assembly (it's a small opening). It's slightly under 35 1/4 inches from motor center to motor center, or exactly 895mm. It's a bit difficult to assemble if you're mounting any extra carry gear (such as a camera/gimbal mount), only because 4 of the screws will require some finessing to get into place and tighten. This is something that should be addressed in a redesign. 5mm would make all the difference here. The landing gear seems a bit fragile, as do *all* low priced landing gear. I'd say there is enough clearance for a full sized DSLR, but my Nex 5t or n will fit without any issues. It might be time to get a van...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ce cadre Octocoptre est un bon choix si vous voulez vous lancer dans la fabrication de votre octocoptre.
-
Lger avec sa composition en aluminium et fibre de plastique, il vous apportera un poids totale au dcollage acceptable pour un engin de ce genre.
Nanmoins, les pices plastique ne sont pas conu pour resister aux chocs.
Malgrs ca, cela reste un trs bon produit

This framework Octocoptre is a good choice if you want to start making your octocoptre.

Lightweight with its aluminum composition and fiber plastic, it will give you a total takeoff weight acceptable for a device of this kind.
However, the plastic parts are not designed to withstand the shock.
Malgrs ca, it remains a very good product
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich habe diesen Rahmen vor ein paar Tagen herhalten und in sofort innerhalb 1h zusammengebaut. Die bebilderte Anleitung ist mit etwas Fantasie sehr gut zu interpretieren. Die Akkuhalterungen im Landegestell sind eine gute Idee, vielleicht sollte aber darber nachgedacht werden eine Befestigungsmglichkeit nher am Schwerpunkt anzubieten. Leider haben die einzelnen GFK-Teile nicht zu 100pcnt ineinander gepasst, so war an einigen stellen nachschleifen ntig. Wenn alles zusammengesteckt ist sollten die Teile auf jeden fall miteinander verklebt werden, da das Landegestell sonst doch etwas instabil ist.
Das grte Manko sind die Motorhalterungen am Ende der Ausleger! Sie sind so labil, dass durch die vom Motor verursachte Vibration den ganzen Copter in schwingung versetzt - hier herrscht akute Absturzgefahr!!! Habe die Halterungen weggelassen und die Motoren direkt auf den Aluminiumausleger montiert und sieh da: keine Schwingungen - keine Gefahr.

Alles in allem finde ich trotzdem das das Preis-Leistungs-Verhltnis stimmt!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice frame, cool for octo. but without retract arm, so its quite difficult to store.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I recieved my X930 rather fast and building it was a breeze! (Thanks to my wifes emory boards haha!) I had to sand a couple slots but nothing i couldnt handle. Can't wait to order my motors!



One thing i noticed tho... In the main product picture, the motor mounts are installed UNDER the boom arm BUT the instructional exploded view shows them installed above the boom.



My instinct tells me that under the boom would be stronger than above. Am i right? Probably! Really excited to start filming my X930!!! (yes i typed that correct - i will film the copter flying as well as film WITH IT!) :)
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HK X930 Octocopter

Upload
Files

产品标签

使用空格分隔标签。使用单引号(')标注词组。