您是否在寻找极速开箱的？如果是这样，我们已经得到了你覆盖。 100 + MPH Radjet超就在这里！
所包含的无刷动力系统可以与3S和4S lipoly电池使用。两个螺旋桨被包含在盒中，5×5和4.75x4.75。您将需要使用匹配您将使用该电池的螺旋桨。对于4S，使用4.75x4.75。与3S 5X5。这两种设置提供了卓越的性能，但是如果你是一个怪胎速度寻找真正的100 +英里每小时的速度，你将要使用的4S lipoly设置。
•100 + MPH开箱的*
电机：2839 3000KV无刷外转子 （含税）
*注：100 + MPH速度要求使用4S lipoly电池
Haven't tried this one out yet due to bad weather conditionNot happy at all, the top speed was only 120km/h (75mph). The stickers was barely attached to the plane. Here's my review: https://youtu.be/8kkkhxC5RsACan't get her to fly. As soon as I give it power it just doesn't fly correctly. I tried tons of different setting and have concluded the motor or bec noside is killing the receiver but I can cut the throttle and it will glide ok. As soon as I give it power I can't control it. I think it goes full up elevator.
Been flying RC for 46 years and never seen anything like this. But then again I am using the cheapo Turnigy i6 radio. Maybe a different receiver could handle the noise better. It goes on the shelf for now. I am done with it.Quite nice package, but here is what I don't like with this plane: The stickers falls off very easily, one of the roderhorns were not glued in and the BIGGEST reason I dislike this plane: It is not a 100mph airplane. I used the Quanum GPS, and my top speed, with a new 4s battery, was only 74,5 mph!
My experience with this plane described with one word would be, disappointed.
Here's how to build it: https://www.youtube.com/watch?v=2yNEf_ue0ZIThe plane goes together really easily and everything was in PC when it arrived. I can honestly say this things is insane, its very quick and remember to dial down your throws if its your maiden and your going to get up it. Its response at speed is insane and I should have dialled down the throws myself. Third fight I was low and fast and must have touched the stick a little too much and a millisecond later it had banked right, hit a small stand of trees, broke a 1 inch sapling in half and peeled about half an inch from the trunk of another sapling all in the process of disintegrating. The damage to the plane was fatal, but the damage to the two trees was a little scary. Great plane though. Would I buy another, hell yes but dial down the throws.This plane is absolutely amazing. The speed it goes is incredible. Out of the box it is reasonably easy and fast to put together. Only thing is at 80 mph and above the plane is very responsive. Dial in expos about 30 for the ailerons and the elevator doesn't need anyI have owned numerous hand toss pushers throughout the years, the most similar to this would be a Stryker. I bought the ready to fly minus the RX. Tried hand tossing this bird 4 times, I even had a 15 foot drop off I was tossing over and two times it would belly land. Thought I would put some up elevator in on the next toss but it would stall and drop to the left or right. After the 4th attempt it broke the nose off. It just does not seem to have enough thrust. Static current on a 3S 45C 2200mAh battery was 33 amps. Not sure what to think but it didn't work for me. And yes I had the correct propeller for the 3S battery. Once again you get what you pay for Hobbyking, I should stick with the parkzone/eflite products.First flight with this plane was with a 170 degree view 600tvl micro FPV Camera situated in the cockpit at pilot eye level using a custom micro VTX and antenna. Having a pilots eye view was awesome, hoping to get an OSD to overlay the console in the cockpit view for a complete nerdgasm. Outfitted it with a 4s battery for the maiden flight, tons of power on tap and cruises along at a 1/3 throttle. Had a friend try to follow it with his 4s capi and he couldn't keep up with it :D
Product shipped missing a couple parts- HobbyKing sent out replacements that required modification. Bit frustrating- deducting a crown for that.I am not sure if this plane will fly on a 3s battery. I had to add quite a bit of lead to get the CG right and my first flight resulted in the plane gliding a short distance and coming down hard and breaking a prop. My other major concerns with this plane are the quality of the foam is not very good, the stickers/decals are not staying on and there are no skids on the bottom of the plane.wow this thing zips. running mine on a 5x5 prop. stock set up- with a 4s 1800 40c discharge no problems, 12 flights so far