New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HobbyKing®™BAE鹰90毫米EDF复合1140毫米(ARF)

HobbyKing®™BAE鹰90毫米EDF复合1140毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
BAE_HAWK
WANT FREE SHIPPING? Click here to find out more!

专为皇家空军更换福兰蚊蚋的BAE鹰已经成为有史以来最成功的喷气教练机之一,同时作为教练和作为作战飞机所使用的许多国家。鹰是世界著名的红箭表演队使用的,当然,这无疑是有史以来建造的最漂亮的军用喷气式飞机之一,尤其是在这个梦幻般的显示方案!

这个美丽的鹰只是渗出质量,深光泽,注重规模细节是惊人的,这种级别的光洁度通常保留给大型水轮机模型和EDF模型有很多,很多更高的价格标签,即使是规模飞行员和驾驶舱是包括在内。一peice的可拆卸翼回缩准备,并设有翼片,玻璃纤维管道被精心设计和全部纳入,硬件也不错的品质,正如你所期望的这个制作精良的典范。对于最后的润色,我们有一组可用专门建造电动缩回,该产品采用弹簧规模尾随链接腿的和铝合金轮毂,它们被设计成适合直在没有国防部的(不包括在内,见下面的相关项目)。

以及真正令人吃惊的样子,这HobbyKing®™鹰是专为性能,还有吨树冠空间Lipoly的,建立将是最小的像飞机性能的高功率6S,8S将带你进入弹道导弹领土!鹰是这样一个惊人的喷气机飞行,既快速又特技飞行,所以我们会建议高扭矩金属齿轮伺服微型的全面。这种高品质的BAE鹰是最好看和表演90毫米EDF可在任何地方喷气机之一,一个真正的规模化,高性能EDF以实惠的价格,为射流风机,这只鹰是必须的!

眼镜:
翼展:1140毫米
长度:1220毫米
飞行重量:2600克〜2800克
机翼面积:24dm2
翼载荷:108克〜116克/平方分米

要求:
6通道TX / RX
90毫米EDF单位
36毫米EDF电机(6S能够最小值)
6〜8迷你高扭矩MG伺服的
80A〜100A ESC
UBEC
缩回
5000mAh的6S Lipoly电池(最小值)

*不包括固定起落架,需要缩回。
*请从它满足了机身为首飞机翼前缘设置的GÇ至105 ...,并调节到适合。

  • SKU BAE_HAWK
  • Brand HobbyKing
  • 容量(mAh) -
  • 重量 4730.0000
  • 长度 1280.00
  • Packaging Width 335.00
  • 高度 375.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

~$200 to my door for a semi-composite jet!? You gotta be kidding me! They're not! Polyester-glass moulded fuselage, complete with all panel lines and an incredible paint-job with full decals. The wing and horizontal stabs are built-up. I made a couple of minor mods:
(1) Epoxy-glass all retract mounts. The mounts are strong enough, but the mains especially need reinforcement on the wing skins where the mounts attach.
(2) Use an epoxy-glass bandage around the wing center-section join. The instructions don't call for it, but the swept wings have no joining dihedral brace.
(3) I made a custom plate for the nose retract to improve its mounting.

Turnigy 5000mAh 8S cells, 3000W (initial) settling to 2500W mid flight. It takes off rapidly and flies very smoothly. Youtube vid of the landing in the Discussion section. Keep the speed up and fly it like a jet - it's NOT A BIXLER!!!!

Fan: PRODUCT ID: 444000002-0
Motor: PRODUCT ID: 9192000089
Retracts: PRODUCT ID: 107000025
Nose-strut: PRODUCT ID: 9107000315-0
Main struts: modified PRODUCT ID: 344000010

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

~$200 to my door for a semi-composite jet!? You gotta be kidding me! They're not! Polyester-glass moulded fuselage, complete with all panel lines and an incredible paint-job with full decals. The wing and horizontal stabs are built-up. I made a couple of minor mods:
(1) Epoxy-glass all retract mounts. The mounts are strong enough, but the mains especially need reinforcement on the wing skins where the mounts attach.
(2) Use an epoxy-glass bandage around the wing center-section join. The instructions don't call for it, but the swept wings have no joining dihedral brace.
(3) I made a custom plate for the nose retract to improve its mounting.

Turnigy 5000mAh 8S cells, 3000W (initial) settling to 2500W mid flight. It takes off rapidly and flies very smoothly. Youtube vid of the landing in the Discussion section. Keep the speed up and fly it like a jet - it's NOT A BIXLER!!!!

Fan: PRODUCT ID: 444000002-0
Motor: PRODUCT ID: 9192000089
Retracts: PRODUCT ID: 107000025
Nose-strut: PRODUCT ID: 9107000315-0
Main struts: modified PRODUCT ID: 344000010

Received my kit some weeks ago here in Brazil with a broken wing (see pics in the files). HK promised to send me another wing, but until today nothing.....
So I managed to fit it and assembled the plane with a 90mm Taiwan Tornado all metal EDF, 100A YEP ESC, PowerHD servos and electric retracs from HK. With a 6S5000 mAh LiPo the plane weighs 3,45 kg, impossible to build it with the 2,6 - 2,8 kg as stated.
Beside the broken wing, the plane is really beautiful and very well made.
PS: no wheel wells and drop tank too!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my kit some weeks ago here in Brazil with a broken wing (see pics in the files). HK promised to send me another wing, but until today nothing.....
So I managed to fit it and assembled the plane with a 90mm Taiwan Tornado all metal EDF, 100A YEP ESC, PowerHD servos and electric retracs from HK. With a 6S5000 mAh LiPo the plane weighs 3,45 kg, impossible to build it with the 2,6 - 2,8 kg as stated.
Beside the broken wing, the plane is really beautiful and very well made.
PS: no wheel wells and drop tank too!

I received this jet in PA within 10 days. I am going to be putting a turbine in it. Perhaps a 44 size or a 60 size turbine.

My first impressions when inspecting the jet and all of its pieces was complete satisfaction. Everything came well packaged and well made. The paint finish and details were superb. Some of the parts will require a little bit of work to get them to fit and look excellent, but that will be had with a jet from any manufacturer.

I would definitely recommend this jet and would buy again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received this jet in PA within 10 days. I am going to be putting a turbine in it. Perhaps a 44 size or a 60 size turbine.

My first impressions when inspecting the jet and all of its pieces was complete satisfaction. Everything came well packaged and well made. The paint finish and details were superb. Some of the parts will require a little bit of work to get them to fit and look excellent, but that will be had with a jet from any manufacturer.

I would definitely recommend this jet and would buy again.

Received my Bae hawk today very poorly packed for a composite edf plain they pack the fomies better nothing but cardboard and tape they get a 2 for packing they also get a 2 for misleading people that the scale pilots come with this jet when they do not? the manufacturer gets a 4 for a nice looking model but HK get a 2stars over all..sorry HK but you should check each model with what it comes and remove the BS in the text regarding the scale pilots....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my Bae hawk today very poorly packed for a composite edf plain they pack the fomies better nothing but cardboard and tape they get a 2 for packing they also get a 2 for misleading people that the scale pilots come with this jet when they do not? the manufacturer gets a 4 for a nice looking model but HK get a 2stars over all..sorry HK but you should check each model with what it comes and remove the BS in the text regarding the scale pilots....

The kit is perfect, but no Pilot and no cockpit detail. The other item of my order in put (servo, retract) in a box , in side the plane box , without protection. The canopy is break in two parts. Not serrious !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit is perfect, but no Pilot and no cockpit detail. The other item of my order in put (servo, retract) in a box , in side the plane box , without protection. The canopy is break in two parts. Not serrious !!!

Rec'd in normal double box setup in 9 bus. days to Midwest from USA WH. One side of the inner box has the 1 piece wing along it. I can feel an indentation and soft spot about 1 in square from the box creasing in. The other side of the box had nice thick bubble wrap along it....had they put the bubble wrap along the wing side(i suspect that is what they were supposed to be doing) it would have avoided damage. I will repair on my own. Like someone mentioned in the Internat. WH section...the decals on the tail are put on noticeably crooked. This absolutely will draw my eye every time I fly this. Unfortunate because the paint and finish is superb. I am just not excited about it much because of that...I will fly it the crooked decals just ruin this plane for me. If you do not plan on repainting this I would avoid purchase, at over $200 it is no bargain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Rec'd in normal double box setup in 9 bus. days to Midwest from USA WH. One side of the inner box has the 1 piece wing along it. I can feel an indentation and soft spot about 1 in square from the box creasing in. The other side of the box had nice thick bubble wrap along it....had they put the bubble wrap along the wing side(i suspect that is what they were supposed to be doing) it would have avoided damage. I will repair on my own. Like someone mentioned in the Internat. WH section...the decals on the tail are put on noticeably crooked. This absolutely will draw my eye every time I fly this. Unfortunate because the paint and finish is superb. I am just not excited about it much because of that...I will fly it the crooked decals just ruin this plane for me. If you do not plan on repainting this I would avoid purchase, at over $200 it is no bargain.

Just received my kit from the Australian warehouse and ordered the main parts to complete from the International warehouse. I think this kit is amazing value for money. Please don't moan everyone (unless the model has been damaged during shipping) - HK are offering these products at great value for money. Will post how my build and test flights go.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received my kit from the Australian warehouse and ordered the main parts to complete from the International warehouse. I think this kit is amazing value for money. Please don't moan everyone (unless the model has been damaged during shipping) - HK are offering these products at great value for money. Will post how my build and test flights go.

Hi Everyone

Has anyone flown this Hawk, could someone tell me the C G.

The book says one C G on Hobbyking if click on the Hawk at the bottom

of the page it says please set C G at 105mm which is different to the manual.

Regards

Peter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi Everyone

Has anyone flown this Hawk, could someone tell me the C G.

The book says one C G on Hobbyking if click on the Hawk at the bottom

of the page it says please set C G at 105mm which is different to the manual.

Regards

Peter.

Have any of you actually even flown the model??? I think that is more relevant than crapping on about what you think of the colour scheme.
Something constructive please.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have any of you actually even flown the model??? I think that is more relevant than crapping on about what you think of the colour scheme.
Something constructive please.

Hello Guys, I just got my Bae Hawk damaged peolo I saw was not sending the china for Brazil, because the package arrived perfectly and protected with air bags, the Bae Hawk was already packed in storage of damaged al hobbyking or ja came from the supplier for hobbyking damaged, I wonder if this will solve hobbyking my problem, have attached some pictures of the Bae Hawk at the time of opening the package, I'm waiting in hugs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello Guys, I just got my Bae Hawk damaged peolo I saw was not sending the china for Brazil, because the package arrived perfectly and protected with air bags, the Bae Hawk was already packed in storage of damaged al hobbyking or ja came from the supplier for hobbyking damaged, I wonder if this will solve hobbyking my problem, have attached some pictures of the Bae Hawk at the time of opening the package, I'm waiting in hugs.

  1. 1
  2. 2
  3. 3
No File Name Download [333]
T45 Download [83]
No File Name Download [538]
Bae Hawk manual Download [1560]
No File Name Download [3059]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking