New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HobbyKing®™微风滑翔机瓦特/可选襟翼EPO1400毫米W /电机(ARF)

HobbyKing®™微风滑翔机瓦特/可选襟翼EPO1400毫米W /电机(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000035
WANT FREE SHIPPING? Click here to find out more!

如果你正在寻找完美的教练,一个稳定的平台,FPV或只是一个轻松的周日传单,看看这个!清风是一个漂亮的“豆荚和繁荣”的风格滑翔机,这只是顾名思义 - 一个真正的“微风”飞行。它不仅是容易上手,很容易打造为好。

微风设有超耐用的EPO泡沫和碳纤维结构使得它不仅重量轻,而且很耐用的组合。机翼简单地用橡皮筋使其易于安装和耐崩溃重视。完美的新飞行员和FPV使用降落在那里有时会有点棘手。鼻子是成型的软,减震橡胶允许它如果您有任何粗糙着陆采取真正的跳动。

这微风的版本出现急性肾功能衰竭(几乎箭在弦上)了28mm无刷电机包括在内。您只需要添加自己的9克舵机×4,20A无刷电调,4通道无线电系统和3S lipoly电池来完成这个模型。

可选的泡沫篷盖包括,提供易于安装的FPV齿轮两个扁平的安装面。它还提供可选的襟翼,你只需要添加自己的襟翼舵机使用。这使得它非常容易使用这款型号为FPV飞行权开箱!

特征:
•几乎箭在弦上W /电机 - 只需添加你自己的无线电系统,伺服系统,ESC和电池
•超耐久EPO泡沫建设
•碳纤维尾管保持模型的光,同时提供优异的刚性
•稳定的飞行特性使得它非常适合初学者和有经验的飞行员都
•卓越的FPV平台,包括一个可选的FPV篷安装
•高效无刷电机预装
•简单的螺栓设计在一起

眼镜:
长度:1030毫米
翼展:1400毫米
飞行重量:630〜700克
电机:2826 1550KV(含)
ESC:20A(必填)
伺服:4x9g(必填)
螺旋桨:6X4(含)

需要:
4通道发射机和接收机
20A无刷电调
3S 1800mAh的电池lipoly
(如果使用可选的襟翼2×额外的舵机)4×9克伺服

  • SKU 9095000035
  • Brand HobbyKing
  • 容量(mAh) -
  • 重量 2255.0000
  • 长度 1020.00
  • Packaging Width 220.00
  • 高度 220.00
  • HobbyKing® ™ Breeze Glider w/Optional Flaps EPO 1400mm w/Motor

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great plane for FPV, I put the vtx on the side of the fuse then ran an extension out on the tail and placed my antenna there, it gives good distant between vtx antenna and rx antenna, I have taken this thing 3/4 of a mile out on a spectrum radio. With no fpv and a 2200 3s it gets about 30min flight times, with fpv, pan tilt, and mobius, it gets about 20mins.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane for FPV, I put the vtx on the side of the fuse then ran an extension out on the tail and placed my antenna there, it gives good distant between vtx antenna and rx antenna, I have taken this thing 3/4 of a mile out on a spectrum radio. With no fpv and a 2200 3s it gets about 30min flight times, with fpv, pan tilt, and mobius, it gets about 20mins.

It's very easy to build and set up. A micro reciever later I found that I didn't have to widen the space under the wing! But that's part of the hobby. The applied graphics were pealing and wouldn't stick back down so off they came and a paint job later.."key lime" It's now my proud daughters "Tinker Bell". Also I added a 3 blade prop. Lots of thrust now. There were some "spacers" for a permanent down flap? "In case the model flew to fast"?? Not in America mates. But later I'm thinking STOL. For the price I'm thinking to build another- Grey with WWII decals. Musuliny's Rescue. Ha!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's very easy to build and set up. A micro reciever later I found that I didn't have to widen the space under the wing! But that's part of the hobby. The applied graphics were pealing and wouldn't stick back down so off they came and a paint job later.."key lime" It's now my proud daughters "Tinker Bell". Also I added a 3 blade prop. Lots of thrust now. There were some "spacers" for a permanent down flap? "In case the model flew to fast"?? Not in America mates. But later I'm thinking STOL. For the price I'm thinking to build another- Grey with WWII decals. Musuliny's Rescue. Ha!

The elevator and rudder linkages have excessive flex and friction, but that is easily solved by bending the wire and using grease. Use plywood to cover the fuse servos, then mount gear on top. I used the PowerHD servos, and the elevator one stripped in a bad landing.



Managed to fit an APM2 inside the fuse by cutting a bit. Strong fuselage and wings, motor has more than enough power.



The included wheels were too small to take off from grass, but rolled fine on concrete and dirt after they got started. Flap servos are a must, they make flying and landing in different conditions very easy. The ailerons are a bit small, and the foam hinges broke after flexing them. The landing gear mount is also a bit weak.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The elevator and rudder linkages have excessive flex and friction, but that is easily solved by bending the wire and using grease. Use plywood to cover the fuse servos, then mount gear on top. I used the PowerHD servos, and the elevator one stripped in a bad landing.



Managed to fit an APM2 inside the fuse by cutting a bit. Strong fuselage and wings, motor has more than enough power.



The included wheels were too small to take off from grass, but rolled fine on concrete and dirt after they got started. Flap servos are a must, they make flying and landing in different conditions very easy. The ailerons are a bit small, and the foam hinges broke after flexing them. The landing gear mount is also a bit weak.

Not a bad little fpv platform...you are limited on space for the electronics..all fpv equipment has to be mounted externally....very stable..i havent added flaps because it takes very little throttle and its climbing...it has great lift...i would recommend finding a better way to secure the main wing because i have had issues with the wing separating in the middle and almost resulting in a crash...even though the wing came loose i was still able to fly it safely back to the ground although it had me worried...but over all its a great buy ..and it flies very easily

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad little fpv platform...you are limited on space for the electronics..all fpv equipment has to be mounted externally....very stable..i havent added flaps because it takes very little throttle and its climbing...it has great lift...i would recommend finding a better way to secure the main wing because i have had issues with the wing separating in the middle and almost resulting in a crash...even though the wing came loose i was still able to fly it safely back to the ground although it had me worried...but over all its a great buy ..and it flies very easily

It is quick to assemble and flies great. Only short coming: Too small to put any reasonable FPV gear in it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is quick to assemble and flies great. Only short coming: Too small to put any reasonable FPV gear in it.

Breeze Manual Download [1224]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking