New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HobbyKing®™J3崽 - 即插即用飞(黄色)

HobbyKing®™J3崽 - 即插即用飞(黄色)

Discontinued Product

Please continue searching for a similar product.
重量:
1837
SKU:
2HK8Y-PNP
WANT FREE SHIPPING? Click here to find out more!

该HobbyKing®™J3幼童是这个著名的民用航空图标的忠实代表,这将吸引有经验的飞行员和初学者寻找一个不错的比例模型的学习上。优异的飞行性能保证以及良好的飞行时间。一个伟大的模型无论在地面和空中。

这是一个简单的组装,即插即用模式,这将有你出来,在旁边没有时间飞。所有你需要完成的模型是800〜1200mAh的3S Lipoly电池和你自己的发射器和接收器(TX / RX)。所有通用的硬件(推杆,喇叭,螺丝等)都包括让你的模型正在进行中。该HobbyKing®™J3崽拥有规模发动机细节,飞行员,蹦极式的起落架和规模幼崽车轮。

眼镜:
翼展:1030毫米
机身长:715毫米
ESC:A-ZTW20A BEC ESC
伺服:4×9克PZ-15178
电机:GC-1300kv
电池:11.1V 3S 800〜1200mAh的lipoly
电池盒尺寸:70x40x32mm

需要:
您的TX与RX
11.1V 3S 800〜1200mAh的电池lipoly

  • SKU 2HK8Y-PNP
  • Brand HobbyKing
  • 容量(mAh) -
  • 重量(g) 1837.00
  • 长度 1065.00
  • 190.00
  • 高度 255.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

My maiden review is below. Thought id follow up. Last sept I finally bent the motor shaft straight enough since they never came in stock. Went to fly on a windy day and couldnt get her airborne. Seemed tailheavy so after 2 failed takeoffs I took her home before I broke anything. I added an ounce to the nose even tho it seemed balanced on the bench. Took her up a couple weeks ago, late april. Perfect day. 0 wind. At full throttle it was okay. The moment I brought it under half throttle, at least 150ft up, she had no glide and went into the same death spiral I saw the first flight. I could put her back together but Ive lost my enthusiasm for this bird. She was going to be my night flyer. My HK P-51 I bought at same time has at least 100 flights now and has been flawless. I dont see anyone else with these problems on the Cub so guess I just got a dud. =(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My maiden review is below. Thought id follow up. Last sept I finally bent the motor shaft straight enough since they never came in stock. Went to fly on a windy day and couldnt get her airborne. Seemed tailheavy so after 2 failed takeoffs I took her home before I broke anything. I added an ounce to the nose even tho it seemed balanced on the bench. Took her up a couple weeks ago, late april. Perfect day. 0 wind. At full throttle it was okay. The moment I brought it under half throttle, at least 150ft up, she had no glide and went into the same death spiral I saw the first flight. I could put her back together but Ive lost my enthusiasm for this bird. She was going to be my night flyer. My HK P-51 I bought at same time has at least 100 flights now and has been flawless. I dont see anyone else with these problems on the Cub so guess I just got a dud. =(

06/01/2013. Bought this plane in summer 2012.

It's beautiful, good material but it can't fly because it's very hard to balance it right.

The adviced 1000mAh LiPO isn't good to balance the plane! It's too tail heavy and adding weight in the nose make it very unstable because the weight need to be placed in all the plane not only in the nose.

In the third and last attempt i putted almost 100g of weight in the nose but it still look a bit tail heavy. After less then a minute he started a rotation on itself and crashed badly (i think because of the too much weight all in the nose trying balancing it).

Crappy plane! wasted 99 $ for the plane and 50 for the shipment!

I think the decathlon could be a better deal if you make the changes that you can find on youtube to balance it right! This changes cannot be made in this piper cub because it's not all foam but there is also an hard plastic (where the pilot sits in) that you can't easily cut and even if you do this spend more on this very scale plane is a non sense if you have to change everything!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

06/01/2013. Bought this plane in summer 2012.

It's beautiful, good material but it can't fly because it's very hard to balance it right.

The adviced 1000mAh LiPO isn't good to balance the plane! It's too tail heavy and adding weight in the nose make it very unstable because the weight need to be placed in all the plane not only in the nose.

In the third and last attempt i putted almost 100g of weight in the nose but it still look a bit tail heavy. After less then a minute he started a rotation on itself and crashed badly (i think because of the too much weight all in the nose trying balancing it).

Crappy plane! wasted 99 $ for the plane and 50 for the shipment!

I think the decathlon could be a better deal if you make the changes that you can find on youtube to balance it right! This changes cannot be made in this piper cub because it's not all foam but there is also an hard plastic (where the pilot sits in) that you can't easily cut and even if you do this spend more on this very scale plane is a non sense if you have to change everything!

got my cub today. was very inpressed with the level of detail on the plane. warning watch out for the left wheel it unscrews it self when the when the wheel rolls. prop construction is strange it took me around 10min to actually figure it out all up would highly recomend thid plane to any one 4 STARS!!!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got my cub today. was very inpressed with the level of detail on the plane. warning watch out for the left wheel it unscrews it self when the when the wheel rolls. prop construction is strange it took me around 10min to actually figure it out all up would highly recomend thid plane to any one 4 STARS!!!!!!!

Fantastic old aircraf Pipper Cub!
Pre build and plug and fly in minutes.
I flew 20 minues with 3cell 1350.
Very nice product to fly with low price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic old aircraf Pipper Cub!
Pre build and plug and fly in minutes.
I flew 20 minues with 3cell 1350.
Very nice product to fly with low price.

Broke the landinggear on a windy landing (yes im a noob). anyone know were i could find a new gear or a nice replace?

nice first plane i think.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Broke the landinggear on a windy landing (yes im a noob). anyone know were i could find a new gear or a nice replace?

nice first plane i think.

I ordered this plane from overseas. It took over a month to arrive. It says in item description it takes a couple of extra days so I didnt expect it sooner. Packaging was nice and no damage upon arrival. Locktighted the left wheel as suggested. Bound to an orange 6ch rx no problem. Motor has some power to it on a Zippy 3s 1000 25c. Then i found one of the aileron servos to be glitchy. I bought some decent servos on ebay for the ailerons as I hear the CS at HK will want me to ship the servo back overseas so I didnt even bother. Took her out for a maiden flight. Right before I went up I commented on the super low amount of throw on the elevator. Figured it would be alright. It wasnt. She just wanted to climb. Full down elevator and half throttle would barely get me to level flight. Full throttle put it in loops no matter where the elevator stick was. Ended up crashing down in a death spiral from 100 ft up. Surprisingly the plane isnt too bad off. Small crack in wing and fuselage which were easily fixed with glue and can barely be noticed. Bent motor shaft which is a bummer since there are no replacements in stock, so Im grounded. The culprit? Elevator servo has the horn cut down to a nub and the connecting rod is in the closest (and only remaining) hole. I replaced the servo horn and moved the connecting rod way out. Looks like I have proper throw now. Ill upload pix of the way t

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered this plane from overseas. It took over a month to arrive. It says in item description it takes a couple of extra days so I didnt expect it sooner. Packaging was nice and no damage upon arrival. Locktighted the left wheel as suggested. Bound to an orange 6ch rx no problem. Motor has some power to it on a Zippy 3s 1000 25c. Then i found one of the aileron servos to be glitchy. I bought some decent servos on ebay for the ailerons as I hear the CS at HK will want me to ship the servo back overseas so I didnt even bother. Took her out for a maiden flight. Right before I went up I commented on the super low amount of throw on the elevator. Figured it would be alright. It wasnt. She just wanted to climb. Full down elevator and half throttle would barely get me to level flight. Full throttle put it in loops no matter where the elevator stick was. Ended up crashing down in a death spiral from 100 ft up. Surprisingly the plane isnt too bad off. Small crack in wing and fuselage which were easily fixed with glue and can barely be noticed. Bent motor shaft which is a bummer since there are no replacements in stock, so Im grounded. The culprit? Elevator servo has the horn cut down to a nub and the connecting rod is in the closest (and only remaining) hole. I replaced the servo horn and moved the connecting rod way out. Looks like I have proper throw now. Ill upload pix of the way t

bonito e ele voa sim. mas, a haste de pouso [de plstico] quebra com facilidade; h um problema nas rodas que no giram perfeitamente travando o aeromodelo na pista; e o pior que no h peas de reposio em caso de quebra.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bonito e ele voa sim. mas, a haste de pouso [de plstico] quebra com facilidade; h um problema nas rodas que no giram perfeitamente travando o aeromodelo na pista; e o pior que no h peas de reposio em caso de quebra.

Fantastic plane! I am how to fly with it. very smooth and precise. little difficult to land in windy days because is a very light plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic plane! I am how to fly with it. very smooth and precise. little difficult to land in windy days because is a very light plane.

flying this plane is much easier than the trainer from the simulator, highly recommended for the very beginner.looks great, durable and flyable.No doubt if you are a beginner this plane is for you

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

flying this plane is much easier than the trainer from the simulator, highly recommended for the very beginner.looks great, durable and flyable.No doubt if you are a beginner this plane is for you

DO NOT ORDER EMS SHIPPING!!! hobby king screws you by saying it takes 3-4 days, i ordered mine and its been 7 days since it was shipped and still nothing.. Hobby King will not even give me any sort of refund on the shipping!! Terrible!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

DO NOT ORDER EMS SHIPPING!!! hobby king screws you by saying it takes 3-4 days, i ordered mine and its been 7 days since it was shipped and still nothing.. Hobby King will not even give me any sort of refund on the shipping!! Terrible!!!

  1. 1
  2. 2
A-ZTW20A ESC prog. Download [287]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save