注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

HobbyKing®™迷你EZ培训师EPO 800mm(可PNF)

HobbyKing®™迷你EZ培训师EPO 800mm(可PNF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
1467
SKU:
9095000032

battery
产品介绍

又一个高翼的教练?我们认为不会。新HobbyKing®™EZ硕士和Mini EZ高手都乍一看教练,但一旦你飞他们,你会看到他们的一切;教练,运动飞机,飞行器。模塑艰难EPO泡沫,明亮的图形的配色方案使他们看起来在空气好,耐用,当他们不可避免地砸在地上。无论是EZ法师和Mini EZ主机身配备了带转向前轮起落架的三轮车,机翼上的螺栓和完整的4通道控制,包括双副翼舵机伟大的侧倾反应!打开盒子,你可获赠低元件数和最小装配。从工作台进入飞行领域在较短的时间比需要为电池充电!

起飞是短暂的甜蜜,由于强大的无刷电机的外转子与着陆微风由于这两种模式的光翼载荷。我们已经有一个爆炸期间,我们所有的测试和视频笋飞这些飞机。当你想放松一下,但向前推油门和踩住木棍入弯他们是稳定的,她醒来。倒飞需要一定的向下升降机由于平底机翼,虽然温和的二面角,使轧辊轴向的人会从高翼教练的期望。踢在硬爬出局的顶部有一个小舵,做脆摊位转回到下线。

无论是EZ大师和它的小兄弟,迷你EZ法师有两种版本,即插即用飞(PNF),并提供几乎箭在弦上W /电机(ARF)

特征:
•即插即用飞 - 只需安装发射器和微型接收器的选择
•模压机身EPO
•轻松访问的电池舱
•坚固的铝制主起落架和弹簧钢可控前轮
•强大的无刷电机的外转子
•充满活力,易东方预应用EZ图形大师

眼镜:
翼展:800毫米
长度:660毫米
飞行重量:340-380g(含电池)
电机:2208 1350KV无刷外转子
ESC:10安培无刷
螺旋桨:SF 7X5
舵机:4 *6克舵机

要求:
4+通道发射器和微型接收器
3S 11.1V 800mAh的电池LiPoly

Product
Specifications

额外信息

  • 商品编号:
    9095000032
  • Brand:
    HobbyKing
  • 重量(g)
    1467.00
  • 长度
    820.00
  • 宽:
    120.00
  • 高度:
    155.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Servo en mal estado.
Compré este artículo en mayo y hasta ahora no lo he montado completamente, apreciando que un servo de alerones va a saltos. Tengo un vídeo donde se aprecia.
Por este motivo puntúo 3 coronas, y de momento no lo puedo volar.
Creo que deberían mejorar la calidad de los servos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
If given another chance, I would avoid this model. It is not necessarily bad, but was very poorly assembled. The nose wheel came with the WRONG sized grab screw, that got jammed before it could grab the wheel. I had to spend $15 to get a screw extraction bit to get it out AND I had to go hunt for a matching grab screw. 2 of the servos were weak/bad and would skip when close to max deflection. This has caused 2 crashes which I fixed with glue. The rear joints that hold the wing is very weak and will get pulled out when doing loops. I glued it in after it got loose. The main landing gear is garbage and got lose after a few successful landings (no crash, no nose over). It's screwed to a very small plastic piece which is just embeded, and not glued to the fuse. When the foam deforms, it got real lose.

After fixing all those problems, the plane flew OK. Not amazing, but OK for the price if it came without the problems. I spend 20 hours to hunt needed parts and fix what should've been right from the factory.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I wouldn't recommend this size to a beginner. This has fragile landing gear, control services offer LOTS of fast aerobatic movement, and the servos (especially for rudder) are mediocre at best. The reason the rudder fails so much for people is because it has the most load/shock due to front landing gear. Change it with an hxt500 and you can get by with the stock servos for aileron/elevator. It flies fast and it does not like to fly slow at all. I was able to balance it with 850mAh battery but it is a tight fit. I recommend ditching the velcro it comes with, velcro a strip for battery, velcro the esc, and let RX stay free so you can move it around. Pack everything under the hatch nice and neat and fly. It is fun but definitely not for beginners.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Do not try to land this on grass as the front wheel is attached to the motorplate. I tried to soflty land this plane but broke the plastic because of some bumps on the ground. Still can fly without the landing gear and lots of vibrations.
Also, when crashing directly on your wing you will brake the mountingplate for the wing. Some tape will do great though. still flies...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Firstly, the pnf version as many report comes with very low quality servos. This is not an exaggeration. Two servos failed whilst setting this model up. they dont centre correctly, they buzz whilst they are static and one of the two stripped teeth. The remaining two that did not fail although working can be seen to be imprecise. So, if you do buy this then you will need to replace all of the servos or buy the arf version and fit servos of your choice. However, this is sold as a trainer model. A trainer model should be relatively easy to fly, stable and able to withstand training type accidents. It flies ok, but it is not especially stable, it wont be hard to fly if you are used to flying something more than a true high wing trainer model, but this is more like a second model. It has many structural weak points, it wont survive a moderate to light nose in without substantial damage to the fuselage. The nose wheel mounting is so flimsy that this will break with just a heavy landing, never mind a "training accident" Given that this is a "new" hobbyking trainer its a disappointment. The bigger and heavier axn floater will survive much more punishment from a beginner and is probably easier to fly. For the money, its not a cheap aircraft, spending 20pcnt more from more traditional sources will buy an aircraft that is twice as good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my order in 4 days. Great packaging - no damage. Assembly is quick and easy. The only complaint is trying to get everything to fit in the tiny battery/electronics compartment. Maiden flight went off without a hitch. Balanced perfect at 30mm with a 500 mah battery. Great fun to fly. Go easy on the landings.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have tried to destroy this plane with lots of bad landings but it keeps coming back. Reinforced the landing gear by gluing a piece of plastic to the underside. For the wing placed some CA down tunnels around the plastic retainer and put in some plastic pegs to anchor it in place. Added a bit of Cello tape over the top of the wing to reinforce after some heavy landings. Can use standard CA glue. Cracked the entire fuselage after a heavy stack - glued 1/16th balsa down each side Use a 1000mAh 3 cell and get 17 minutes at 1/2 throttle* 10 if using full. Will do vertical - have increased prop to 8x6. Take off on 40pcnt throws and then go full! Needed to replace servos after a while. Highly recommended plane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This trainer is absolutely amazing!

Very easy to build, just need to glue the stabilizer and connect it's rod and if i remember correctly, that's it!!!

The plane came with a defective servo (The rudder/front wheel) which i've replaced with a new one.

Accept of this, everything is working perfectly and the plane flys and lands fantastic!!!

I had to add only 10g of front weight to balance it, if you want a bit more front weight you can add 5g more.

I've used zippy compact 850mah and it holds for up to 10 minutes of flying time.

The only problem with this plane is the very small cabinet for the battery and receiver which makes it difficult to close the battery door.

Good bye..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A great plane to fly even for the more advance pilots, you can tame it down for the beginner or let it loose for some fun. I bought this plane for my 8 year old some as I have started to train him using a buddy cord. Well build plane easy to fly, handles short to medium grass well on take-off and landing for the small wheels that are on this plane. You might want to check your servos to make sure they are secure(held in my 2 screws) as the Rudder and Elevator servos in the EZ Master I received were loose, I just added some hot glue to the ends of them. Also the landing gear mount that the gear screws into can come loose after a few bumpy landings on grass, best to hot glue the mount in place as well. A side from some servo buzzing I haven't had any issues with the Rudder servo as indicated in a couple of the other reviews. Over all a fun plane to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The plane looked great when it arrived. However in it's maiden flight it sustained a very minor crash, it fell in a shallow angle against sand from may be 12 feet and at half throttle.

I walked to the crash site not expecting anything but may be a bent propeller. When I arrived I saw that the plane's fuselage had split open in two halves and that the entire motor/nose section had detached and was hanging only by the ESC wires. I had never seen anything like it.

May be mine was defective since both halves of the fuselage seemed no too have welded together properly during manufacture. Anyway looking at the wreckage I could see that the entire engine support was extremely weak and that the foam seemed quite flimsy. I would not buy again or recommend as a trainer.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HobbyKing® ™ Mini EZ Master Trainer EPO 800mm

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

battery

产品标签

使用空格分隔标签。使用单引号(')标注词组。