我们介绍的3D EPP MX2。拥有一个梦幻般的设计和布局，这一切都出来EPP 3D'er将满足最渴望的3D飞行员！
它的机身具有高扭矩刚性且光与空间载荷的无线电和电力系统长期顶部舱口下方。机翼是一件事情EPP特色的建筑，非常准确的对称翼型与2个额外的梁，以尽量减少弯曲和扭曲。控制面是别的东西 - 的升降舵，方向舵和副翼配有3层建筑（EPP-Depron-EPP）使僵硬的表面和不挠极端抛出！快滚'快'和控制响应是瞬间完成。
光 - 但刚性 - 机身增加了一个伟大的飞行3D“泡沫”。瀑布，鹞，平旋转，滚动圆这个模型具有执行这些和其他任何你能想到的招式精准！
•僵硬EPP / Depron复合控制面
3S 11.1V 1100-1300MAH立宝
10x4.7 / 11x4.7螺旋桨
This model is made very well, its easy to assemble, and its very durable.
I am flying it with Turnigy D2836/8 1100KV on a 11x4,7 SF APC prop. This combination is pretty OK, but if would be buying this model again I would go for about 10-20 grams heavier motor which would not make it only more powerful but also it would make finding the CG possible without adding lead in the nose. That being said, I can hover with its current setup no problem.
For all four servos I am using Turnigy™ XGD-11MB, which seem to be doing their job pretty well.Packing and shipping (east warehouse) was excellent. Assembly is easy, I used hot glue and foam-safe CA to assemble.
The plane is a little tail-heavy (I used no ballast in mine) but its light enough that I don't think it matters that much. I used the Turnigy D2836/8 motor and 30A ESC. With a 1300 mAh 3S, flying weight came in at around 651 grams. I get around 4.5 minutes flying time. You will probably do better with newer batteries as mine are approx. 2 years old.
I used the recommended control throws, with 50pcnt expo in ailerons and 60pcnt expo in the elevator. This is my first EPP and I think the large expo settings helped me keep things smooth in the air.I HAVE THIS PLANE WITH TURNIGY PARK480 /1020KVMOTOR ,HXT 900 SERVOS,WAS NOT TAIL HEAVY AS SOME HAVE SAID ,I ACTUALLY PUT A LITTLE LEAD IN TAIL FOR BETTER3D .IT HAS PLENTY OF POWER WITH THIS SETUP. FANTASTIC 3D PLANE ,DOES EVERYTHING YOU CAN IMAGINE .6MINS HARD 3D WITH 1300MAH BATTERY,GOOD SIZE TO FIT IN CAR IN ONE PIECE,HANDLES WIND WELL,EPP IS VERY TOUGH AND LIGHT AND WILL NOT CHIP OR DENT LIKE EPO ETC.JUST BUY ONE! THANKS HOBBYKING,CAN YOU PLEASE STOCK THE EDGE AS WELL?OMG I love this plane. Assembly is easy, I used hot glue for all the body joints and some foam-safe CA for the hinges. I tucked a little ballast in the front of the canopy to balance at recommended CG (85-90mm from LE). A bigger battery might fix this, but I love how light it flies with the 1300. Just take your time getting all the measurements right the first time and it will fly like a dream. 5 minute flight times on the Zippy 1300 3S with a Park 480 and Plush 40A. I have only run 11x4.7 props so far, and it is nice and punchy. This plain really floats well!!! I would definitely recommend this; even for a first time-builder, medium-skill pilot, it was a breeze.Love this little plane, bright colours make orientation easy and looks great in the air, very easy buildaereo senza pretese, comunque esegue le figure senza problemiGreat plane, but made some mods. 2.5mm wire and 2 1/4 inch narrow wheels, Park 480 with a 11x8 prop, and using a 2200 mAh 3cell, yes there is plenty of room with a little trimming. after a catastrophic crash 15 minutes and a hot glue gun it was back in the air. Only ordering another because mine is so ugly due to all the glue and tape. Perfect plane for learning 3D flying.Nice plane, after fitting stronger landing gear wire and larger wheels. I fitted a DAT-3511-750KV motor and 11x8 prop. running on 3s 2.2Ah compact. Will try 4s with 10x6 when batteries come in stock again. Wing is very strong, but fuse not as robust as expected. Fun to fly for sure.Love this plane. Very aerobatic and will do every trick in the book. i was kind of skeptical about the 450 motor they recommended because of the weight of the plane with all electronics but its works great and i get unlimited vertical. She is very durable but the i will say the plane isnt 100pcnt epp , there is some deperon foam sandwiched bettween the epp foam wich is fine but use Foam safe ca.Very good airplane, i fly it 6 months now. It can do all 3d manuevers (harrier, hover, torque roll, blender, KE spin, rolling harrier, rolling loop, pinwheel,........). Perfect plane to learn 3d aerobatics. It lacks on precision flying, but it is an EPP plane after all. I fly it with an Axi 2808/24 and 10x4.7 prop, 30A Jeti ESC and 3s 1800mah 25c. The batteries are a bit to big, I had to modify to fit, so 3s 1300mah is the way to go. It is a very good buy for the money.
SkyWing39inManual download now [412kb] Manual Deutsch download now [559kb] Nose mod by not2fast download now [626kb] undercarriage mod mca download now [71kb] No File Name download now [1241kb] Skyway Product Manual download now [412kb]