注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

HobbyKing™数字伺服2.2公斤/ 0.11sec /12.5克

HobbyKing™数字伺服2.2公斤/ 0.11sec /12.5克

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
35
SKU:
DS-929MG

acc
产品介绍

业余爱好景数字伺服系统的费用可能超过模拟,但对于精确控制和最小的死者品牌宽度,他们是一个很好的选择。

特征。
球轴承支承
可编程数字,与MOSFET驱动器
金属齿轮
高速及高扭矩

规格。
速度:.11sec / 60deg @ 4.8V
失速扭矩:2.2kg.cm @ 4.8V
常委会扭矩:2.2kg.cm/5deg持币观望!
重量:12.5克
尺寸:22.5x11.5x24.6mm

Product
Specifications

额外信息

  • 商品编号:
    DS-929MG
  • Brand:
    HobbyKing
  • 重量(g)
    35.00
  • 长度
    64.00
  • 宽:
    30.00
  • 高度:
    45.00
  • 速度(秒/ 60deg )
    0.11
  • 扭矩(公斤)(最少0.01公斤)
    1.80
  • Unit Weight (g):
    12.5
  • A(毫米):
    31.00
  • B(毫米)
    23.00
  • C(毫米)
    28.00
  • D(毫米):
    12.00
  • E(毫米):
    32.00
  • F(毫米)
    20.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
A waste of money, I've tried to use it on my servo, and it shakes too much, more than an analog servo. Not recommended at all
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well, I Really like these servos so far. I took an offer some days ago and purchased 4 of them for $4.95 each to replace mt TGY-90 cyclic combo, since one of them failed and I had a chrash. They seam to be smoother and a bit faster than those analog servos. They are a much more symetric crew too. I used to make some travel adjusts to eache channel with the analog servos. But not with these ones so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice servo for my tri x900
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Work well, have not had any bad ones yet out of over 12 of them. For the price they do the job very well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great little servo for 450 heli
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed 3 of these servos on a HK450 heli. Due to a crash the gear 2 of the servos has stripped. Opened the servo and it's not all metal gear. There's one plastic gear and that gear has stripped.
Also to much play in the gears.
For this price HK has better servos. Won't buy them again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
got 5 for my stinger 64. they are great little servos that are smooth and center great. I have been flying on them for a year now and have not had a issue. No nose at all like my other digital servos. Would buy more and even replace some other servos, just wish they were cheaper but still a great deal at 7.08.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Had two of these laying around waiting to be installed on my FPV wing (Skywalker X5).
I bought them as the older (analog, also 12.5g) servos had annoying jitter, probably due to VTX EMI, and I heard that digital servos are more immune to EMI.

To make a long story short - I replaced servos to these last week. They perform MUCH better - no jitter whatsoever, haven't even put ferrite beads on them. And that's with a 800mW VTX on board.

I'm impressed. ordering a few more for my next project.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Difficult to rate these servos :
- the mechanism itself is good with precision, speed and torque ok for normal(not 3D) flying on a trex 250
- little noisy but unnoticeable while airborne
- the plastic of the case is so weak that even the slightest shear effort will result in instant break of the mounts, i've seen biscuit stronger than this servo ...

Mr Hobbyking what the use of a correct mechanism, metal gears and all the rest if all this is mounted in a so weak case ?
Ok they are cheap but i surely won't trust these on FBL helis, where huge loads can be put on servos/servos mounts.

This review is applicable to both DS929/939MG which have the same crappy case and for both HK/Corona brands as the only difference between the two brands is only the price (i own several 929/939 of the two brands)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cheap servo. I figured they would be a little better. Center ok, but lots of slop. Putting in F 4 Phantom EDF. They also heat up with very little force put on them. We will see how it goes. Hopefully they will hold up and not fail and ruin my plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。