注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

HobbyKing™电解质40毫米EDF微射流复合508毫米(ARF)

HobbyKing™电解质40毫米EDF微射流复合508毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
984
SKU:
411000006-0

esc
battery
servo
acc
产品介绍

你觉得对速度的需要?该HobbyKing™电解质小型飞机将满足这一需求相当不错。最初由美国设计师布雷·贝克尔博士开发并限量生产销售的套件,它现在作为一个几乎箭在弦上版本,节省您的时间和精力。同时与机身和动力系统的设计师紧密合作,你在这里看到的电解质是最快的微喷绕之一。最初的原型是第一个微EDF超过百英里每小时,是目前在AMA博物馆印第安纳州曼西显示。

电解液拥有一个美丽的彩涂玻璃纤维机身,轻木机翼和尾翼。包括在箱子是两个不同的垂直尾翼的选择。由于这是一个高性能的飞机,它需要进入的空气很快,所以我们甚至已经包括在框中迷你蹦极启动套件。电解质的心脏是包含的铝罩,8叶片的叶轮,MadThrust博士40毫米EDF单元8000kv内转电机。这是通过贝克尔博士开发专门为这个模型,得到没有过量电流汲取的最佳性能的电源系统。

构建电解液将工作几天晚上。虽然这是一个几乎箭在弦上模型,我们也提出了一些以前的建筑模型。您将需要一些工具,如包括各类位,各种钻头,环氧树脂,透明胶带,胶水CA,砂纸,爱好刀,剪刀和一些耐心旋转工具。

飞天电解质是真正的享受。我们建议您使用最佳启动包括蹦极套件。从那里,它的全油门全路!高速通过,在甲板上点卷,无论哪种方式,其肾上腺素乘坐的全部时间。退房HobbyKing™电解质40毫米EDF,一个小模型,大乐趣!

下载电解质说明书这里

特征:
•几乎箭在弦上 - 完成最后组装,安装电子和飞!
•彩涂玻璃钢成型机身
•包括合金Madthrust范博士和机身8000kv电机优化
•磁性安全舱口
•预覆盖机翼和尾翼有两个垂直尾翼的选择
•包括迷你蹦极套件发动援助
•超高性能,能够100英里每小时+速度
•蹦极钩和塑料起落橇

** **更新新电解质套件现已拥有玻纤电梯控制喇叭,没有胶合板的第一次运行。其他小的改进已经落实到新货。

产品规格:
翼展:508毫米
长度:533毫米
重量:210g(W / O电子)
EDF单位: 博士MadThrust40毫米EDF瓦特/ 8000kv电机

要求:
3+频道发射器和接收器
25〜30安培ESC
3S 11.1V 850〜1300mAh的Lipoly
3 * 4.7〜5克舵机

Product
Specifications

额外信息

  • 商品编号:
    411000006-0
  • Brand:
  • 重量(g)
    984.00
  • 长度
    565.00
  • 宽:
    100.00
  • 高度:
    170.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I can't say enough good things about this jet. NOTE::NOT FOR THE BEGINNER OR INTERMEDIATE. If you want to go fast, this'll do it. But you better have some go fast time under your belt! For the money, quality is good. May have to do some adjusting to canopy. EDF is well balanced and good running. I bought 2, should have bought 6 at the sale price of $47!! What a deal.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice quality composate and balsa kit ezy to put together however i dident like that you have to glue or hot glue elevator servo on the inside of the fuse and the the eleron servos where set up on the bottom of the plane so i modifyed the fuse to use the eleron servo arms on the top as to not damage the horns and push rods on landing.other than that is a small plain and fast with supplied DR Mad 40mm Edf setup,,Not recommended for beginners and also comes with bungee launcher.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
HobbyKing Electrolyte 40mm EDF Micro Jet Composite 508mm (ARF).

Bungee take off is rather fun, not really a 100mph plane to me but for the size of the edf it's rather fast for what it is. Will experiment a little more with the tubing and shrink it to sub 30mm diameter to hopefully make it a little more fun/faster.

Overall weight was 430g and motor stated at 400g of thrust so a little off 1:1.

I'm relatively happy with the kit - especially the edf unit. however a little disappointed with overall performance of the plane

Magnets in hatch need to be aligned a little better as there is a few mm gap as stated in a previous review.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my few weeks ago!
good mold, good painting and good balsa.
filled with 30A yep esc and 3s 1000mah 45C battery and obviously 4 x-31/d-47 ( yes, I have added rudder for better controll)

fly very very fast and flies on rails.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
purchased the ducted fan kit and all looks very nice. only gripe is magnets on fuselage and canopy not installed properly. when installing canopy it slides backwards and leaves a 3mm gap. really annoying. don't really want to hack them about.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Top quality for sure, also a fun and challenging build. Realestate inside the fuse is sparse, especially with the full ducting system taking most of the space.Just taking the time and also using the recommended d47 servos is a must. I'm using a YEP 30,it fits nice and works well,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This baby is amazing, Bret and HK did a fantastic job with this kit and the only thing l regret is the fact I ordered only one. ....the quality is perfect, the included fan unit has tremendous power and is well balanced and very smooth. If like me youre a huge bandit or electra fan youll fall in love with this bird. You wont regret your choice! Even the packaging is Excellent! and the manual reflects the top level of this kit , great!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not very impressed with build quality of the fiberglass. Some holes don't line up and others are missing plywood backings. That made it a tricky build, definitely not for an inexperienced modeler. However, it flys nice with easy bungee launcher and landings are a bit trickier. Be careful when flying this fast plane, it disappears pretty fast.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received the box. This thing looks nice! Quality of the fibreglass looks good, the covering om the wings and tail is very nicely applied. The included fan looks nice too. This is promising to be a very nice model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Initial impressions: Composite fuselage is very nicely finished and not too heavy. The eight blade fan is pretty stiff (probably reinforced) plastic inside an alloy shroud. Very nice - definitely NOT one of the cheapo plastic units often sold with small jets. The 8000KV motor sounds amazing when run on the bench, especially for one so small... The parts seem to fit well together, although ply elevator horn was in two parts - not sure if that is intentional or one off fault with the kit. Easy enough to glue together or fabricate. Conclusion pre-build: Very impressive and great value for money. Other guys in the club similarly impressed and threatened to buy, so may have to add some distinguishing markings..... Not a jet for the faint hearted or novice, but otherwise BUY IT. The UK weather is likely to remain cold and windy for some time, but will write up a short review after getting to fly it.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Electrolyte Micro EDF Jet

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
servo
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。