New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HobbyKing™EZ培训师EPO1230毫米W /电机(ARF)

HobbyKing™EZ培训师EPO1230毫米W /电机(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000042-0
WANT FREE SHIPPING? Click here to find out more!

又一个高翼的教练?我们认为不会。新HobbyKing™EZ硕士和Mini EZ高手都乍一看教练,但一旦你飞他们,你会看到他们的一切;教练,运动飞机,飞行器。模塑艰难EPO泡沫,明亮的图形的配色方案使他们看起来在空气好,耐用,当他们不可避免地砸在地上。无论是EZ法师和Mini EZ主机身配备了带转向前轮起落架的三轮车,机翼上的螺栓和完整的4通道控制,包括双副翼舵机伟大的侧倾反应!打开盒子,你可获赠低元件数和最小装配。从工作台进入飞行领域在较短的时间比需要为电池充电!

起飞是短暂的甜蜜,由于强大的无刷电机的外转子与着陆微风由于这两种模式的光翼载荷。我们已经有一个爆炸期间,我们所有的测试和视频笋飞这些飞机。当你想放松一下,但向前推油门和踩住木棍入弯他们是稳定的,她醒来。倒飞需要一定的向下升降机由于平底机翼,虽然温和的二面角,使轧辊轴向的人会从高翼教练的期望。踢在硬爬出局的顶部有一个小舵,做脆摊位转回到下线。

无论是EZ大师和它的小兄弟,迷你EZ法师有两种版本,即插即用飞(PNF),并提供几乎箭在弦上W /电机(ARF)

特征:
•几乎箭在弦上W /电机 - 只需安装电子和速度控制的选择
•模压机身EPO
•轻松访问的电池舱
•坚固的铝制主起落架和弹簧钢可控前轮
•强大的无刷电机的外转子
•充满活力,易东方预应用EZ图形大师

眼镜:
翼展:1230毫米
长度:980毫米
飞行重量:920-1000g(含电池)
电机:2216 880KV无刷先驱者

要求:
4+通道发射机和接收机
3S 11.1V 1800mAh的电池LiPoly
30安培无刷速度控制
SF 10x7螺旋桨
4×8克舵机

  • SKU 9095000042-0
  • Brand HobbyKing
  • 容量(mAh) -
  • 重量 2075.0000
  • 长度 1020.00
  • Packaging Width 240.00
  • 高度 255.00
  • HobbyKing™ EZ Master Trainer EPO 1230mm w/Motor

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

a very nice......piece of ch...... !
a real pain to install the front steering due to the drilling to clamp the wheel axle
and then i flew it about 20 seconds, made a flip, and the plastic stuff where you put the wing it went off due to lack of glue or bad glue i don't know, with the following result:

https://youtu.be/AoiX4hEVy4s

even my expensive upgrade emax 2215/20 motor is bent

gutted

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a very nice......piece of ch...... !
a real pain to install the front steering due to the drilling to clamp the wheel axle
and then i flew it about 20 seconds, made a flip, and the plastic stuff where you put the wing it went off due to lack of glue or bad glue i don't know, with the following result:

https://youtu.be/AoiX4hEVy4s

even my expensive upgrade emax 2215/20 motor is bent

gutted

I've just started putting mine together and have found some point's of interest, the main wing spar is only 30cm long and 6mm wide, the recess in each wing is 30cm, so they put a ridge in the centre of the 30cm spar to stop it sliding into either wing to far and causing the wing to fold, I would recommend adding your own spar at 60cm long, the wings themselves look very tough at least 3cm thick till near the wing tip, ..............The front wheel holder is a brass insert into plastic which connects to the push rod, I recommend removing the brass insert and CA gluing it back in, (very fiddly) the plastic moulding around the brass insert securing screw is less than half a mm! at 2 points around the securing screw, mine came apart just tightening up the securing screw, easy fix,... Oh and the kit came with 2 propellers even though the description says they are required, In general this looks like a tough plane, the landing gear looks good, all over I reckon it's a good trainer/slow flyer, I will report back after I have flown it, looks like a good purchase to me!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've just started putting mine together and have found some point's of interest, the main wing spar is only 30cm long and 6mm wide, the recess in each wing is 30cm, so they put a ridge in the centre of the 30cm spar to stop it sliding into either wing to far and causing the wing to fold, I would recommend adding your own spar at 60cm long, the wings themselves look very tough at least 3cm thick till near the wing tip, ..............The front wheel holder is a brass insert into plastic which connects to the push rod, I recommend removing the brass insert and CA gluing it back in, (very fiddly) the plastic moulding around the brass insert securing screw is less than half a mm! at 2 points around the securing screw, mine came apart just tightening up the securing screw, easy fix,... Oh and the kit came with 2 propellers even though the description says they are required, In general this looks like a tough plane, the landing gear looks good, all over I reckon it's a good trainer/slow flyer, I will report back after I have flown it, looks like a good purchase to me!

repowered mystery 2830 1500kv 8x4 prop Download [330]
How to brace your wing B4 flying OR ELSE Download [960]
what happens on unbraced wing! Download [429]
plastic pulled through foam not glued in Download [830]
New nose repair xtra screws for wing Download [2676]
EAZY MASTER FUSE WITH WING DOWELS Download [2143]
longer wing rod 600mm straight in place Download [1744]
CG push rods Download [605]
nose wheel leg horn Download [22]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save