该HobbyKing™IONOS F3A是我们最新的电动飞机模式专为练习F3A精密演习设计的。该IONOS F3A到达几乎箭在弦上意味着大部分的主要工作已经完成。所有你需要做的就是完成最后组装，添加的电子，电机和电池的选择，然后去飞。内置了轻木和胶合板的机身重量轻，结实。产生清脆的响应减少了飞行员的工作量非常僵化模式。
该IONOS F3A被设计在一开始就为电，并且具有良好的设计马达的安装框，以及一个信道，以允许冷却空气容易退出马达托架。这是挂载您的ESC的理想地点。大机身顶部舱口可以让你快速访问你的接收机，检查机翼螺栓或更换电池在几秒钟的事。说到翅膀，在IONOS F3A在做各种运输两件式插头变得轻而易举。
•几乎箭在弦上 - 完成最后组装，安装电子和电机，飞！
重量：2300〜2500克（W / O电池）
5〜6S 18.5〜22.2V Lipoly电池
ok this is a BJ Craft Monolog which they stopped making a couple of years ago the material and acc quality id reasonable the colours arnt too bad when you see it in person the pink canopy can be painted over the reason for the low review is that I have been unale to get it to fly straight and today I put a straight edge on the fuse side and found it to be bent to the left by 2.0mm plus which on a normal model would be no biggy but this has such deep sides that it acts as a big rudder and I have had to put up to 5mm of ruder trim on it to try and get it to fly straight but it effects other menovers I was going to use this as a practice model but I have now made a warranty claim for the fuse see how hobby king respond to a customer that has spent $thousands with them they have bee good up to date but I have never had a claim for a full model beforeThe manual is terrible and CG is totally wrong. If you use CG based on manual, you will for sure get crashed. Both tail wheel and landing gear are not good at all and you have to replace all. Also, my one wing is not aligned/connected well with the fuselage and there is a big gap between the top wing area and fuselage. The canopy lock is also designed badly and you need to replace it.
Fine model, it flyes very smooth and almost perfect.
I use it for the F3A European Hydroplane Contest training (just a few modifications are needed for that purpose).