注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册

HobbyKing™弥数字高速伺服MG公斤/ 0.06sec /52克

HobbyKing™弥数字高速伺服MG公斤/ 0.06sec /52克

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 33.70
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
75
SKU:
HK47002DMG

Price War

acc
产品介绍

香港弥系列伺服系统通过高精度的伺服技术代表下破。采用磁感应强度,而不是一个电位器,精确度和性能无与伦比的水平。

眼镜:
电压:4.8V / 6V
速度:0.07秒/ 60deg(4.8V) - 0.06sec / 60deg(6V)
扭矩:4.50kg.cm(4.8V) - 5.50kg.cm(6V)
尺寸:40毫米x 20毫米点¯x39.2毫米
重量:52
齿轮传动系统:全钛合金

弥:磁感应,代替传统的电位计(1877年发明)的使用磁旋转编码器。磁旋转编码器有更长的使用寿命,并遭受磨损少。

Product
Specifications

额外信息

  • 商品编号:
    HK47002DMG
  • Brand:
    HobbyKing
  • 重量(g)
    75.00
  • 长度
    105.00
  • 宽:
    20.00
  • 高度:
    90.00
  • 速度(秒/ 60deg )
    0.06
  • 扭矩(公斤)(最少0.01公斤)
    5.50
  • Unit Weight (g):
    52
  • A(毫米):
    44.00
  • B(毫米)
    40.00
  • C(毫米)
    40.00
  • D(毫米):
    20.00
  • E(毫米):
    54.00
  • F(毫米)
    29.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Very impressed with these servo. Precision and speed ist absolut great. Servohorns in standart and high torque from Blue Bird, Hitec and Futabe will fitt. GWS is to small.
Quality
Value
Overall
Quality
Value
Overall
used them for my aileron, two on one long rudder. Wowe...what a speed and precisition. Geartrain is absolute high precition. Use them with a 2s LiFe and they are faster then my fingers........
Quality
Value
Overall
Quality
Value
Overall
I'm running 8 of these on a 100cc Extra 330 through a 14 channel Futaba receiver and powered by 2x2100mah Turnigy Life batteries in parallel. 10 flights and no problems; these are the fastest servos I have ever used in 30 years of RC.
Quality
Value
Overall
Quality
Value
Overall
Good, very fast servo for the price!
Quality
Value
Overall
Quality
Value
Overall
Hey guys I have been running 2 of these servos now in 1/10 scale off road cars one in a short corse truck and one in a 4x4 buggy and I must say I am very impressed with the speed, accuracy and strength of these servos. They don't run hot at all the drain on the battery seems to be less than my previous servos (savox). I would recommend this servo to any one running 1/10 scale cars off road or on road. I would guess there is plenty of torque to run this in an 1/8 scale car as long as you DO NOT use 7.4V lipos unless you run them regulated. I have put probably 15-20 packs through my SC truck now and still going strong.
Quality
Value
Overall
Quality
Value
Overall
i have one this things use for my tail servo in hk600gt very noise servo. and get warm my ubec is TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly..i use 2s lipo when i use 6 volt setup very noise, :(
Quality
Value
Overall
Quality
Value
Overall
These servos work nice for HK600GT tail, fast and centering is very good. I like this better than my Align DS650 servo so far. Have only used for few weeks so can't comment on how well they hold up long term. You need to add large capacitor soldered to /- leads from BEC to receiver if your BEC is a switching type as most are. They will make lots of noise without it and could cause brown out, I used 3500uf 16volt from HK found in RX/TX accessories and have had no issues.
Quality
Value
Overall
Quality
Value
Overall
5Kg y 0.06, es ideal para cola

Quality
Value
Overall
Quality
Value
Overall
I used this servo with UBEC 6V (6.2V) step down to 4.8V (my custom 2 diode step down). It not heat temperature = 41-43C in 5 min
Quality
Value
Overall
Quality
Value
Overall
I used HK47002DMG powered by the TR-UBEC15 using a 2S set 5V (with step down for rudder) Temperature is 43-46C
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。