注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

HobbyKing™弥数字伺服HV / MG11.8公斤/ 0.06sec /61克

HobbyKing™弥数字伺服HV / MG11.8公斤/ 0.06sec /61克

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 48.06
Rating:
Stock:
重量:
92
SKU:
HK47179TM-HV

Price War

产品介绍

香港弥系列伺服系统通过高精度的伺服技术代表下破。采用磁感应强度,而不是一个电位器,精确度和性能无与伦比的水平。

眼镜:
电压:6.0V / 7.4V
速度:0.07sec / 60deg(6.0V) - 0.06sec / 60deg(7.4V)
扭矩:9.60kg.cm(6.0V) - 11.8kg.cm(7.4V)
尺寸:40.1毫米点¯x20.5毫米点¯x39.4毫米
重量:61
齿轮传动系统:全钛合金
汽车:无芯

弥:磁感应,代替传统的电位计(1877年发明)的使用磁旋转编码器。磁旋转编码器有更长的使用寿命,并遭受磨损少。

Product
Specifications

额外信息

  • 商品编号:
    HK47179TM-HV
  • Brand:
    HobbyKing
  • 重量(g)
    92.00
  • 长度
    90.00
  • 宽:
    21.00
  • 高度:
    90.00
  • 速度(秒/ 60deg )
    0.06
  • 扭矩(公斤)(最少0.01公斤)
    11.80
  • Unit Weight (g):
    61
  • A(毫米):
    44.00
  • B(毫米)
    40.00
  • C(毫米)
    40.00
  • D(毫米):
    20.50
  • E(毫米):
    55.00
  • F(毫米)
    30.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought 15 of this servo. I use them in all my touring cars, and have sold it to most of my friends in the local club. 2 has failed, one did not work and one failed after short time use. I still use my oldest ones, they have now been in use for over 2 years. Only remember to adjust the endpoints, if not adjusted, the servo will be not work very long. If correctly adjusted, you have the servo for a loooooong time :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gears are to weak ,ripped of the teeth after 10 minutes ,only used as a brake servo in a big scale car.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Schrott, ist nach nach ca. 30min Einschaltzeit an 2S verreckt und bis heute nicht ersetzt. Vergesst den den Dreck.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have build in KDS600FBL on Swashplate in late Spring 2013. Fly with Microbeast @ 7,4V and TDT Head. Over Summer the Heli has done above 40 Flights Slow 3D. Servo is fast, strong and smove.
By powering up the Heli before Flight, i hear the Nickservo scratch. At home i find the Gear has lost the top of the tooth over the quater round. Fond the same Picture in Rollservo. The Gear is to weak for the Power of this Servo.
Please HK, give these fine Servo a better Gear for 5 or 10 Buks more!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
They seam to have enough power and speed , not sure how tough they are as I was landing my 50cc the were in and landing gear collapsed , bit of a weak design and when i checked the aileron servos the gears were sticking then i tested to see how they handled some resistance and they sheared the gears quite easily , the elevator and rudder ok but time will tell I guess to see if they last .3 Star just cause Im not sure at the moment and they are not that cheap compared to the 958
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very good, fast and strong, I like aluminium heat sink. thank you HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Testing them on the swash of a X7, with a 47902 on the tail.
Using a servo tester, speed was slower as specs, power ok.
Accuracy fair-good, not as good as some other servos (Futaba, servox) i have used.

These servos seem to be really powerhungry. Some of the erratic behaviour of these MI servos reported elsewhere might be related to that fact. When hooking up just one servo to a std HBEC at 6v, the BEC was sometimes exhausted by just powering up, causing erratic behaviour. With a WR Super BEC or Quasar no problems.

I have noticed a slight tremble, especially on the tail. Running the tail at 250mhz.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
servo resolusion good



servo speed good





but,,,



servo horn > weig down (by hand) -> servo horn (>Vibration(tremble.)),,,maybe Semiconductor chips > Cheap





other expensive servo-> Not vibration(tremble)...



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using them on a Flybarless Trex700e cyclic, so far they are excellent. Fast, Accurate and Strong, The casing has been updated since this photo, they now have the same case as PRODUCT ID: 019000001 which is actually bettter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used for elevator on a 6 meter glider during extrem speed . Fantastic answer, do not find any bad thing to say.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。