New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

HXT 2835(380S)3900kv无刷内转

HXT 2835(380S)3900kv无刷内转

Discontinued Product

Please continue searching for a similar product.
重量:
150
SKU:
HXT2835-3900
WANT FREE SHIPPING? Click here to find out more!

电机尺寸:2835(380S)
速度:3900kv
ESC要求:40A
电压范围:6〜12V
空载币种:2.0A
最大负载:40A

直径:28.2毫米
长度:37毫米
前安装孔距:15毫米
前安装螺纹尺寸:M3
轴直径:3.2毫米
轴长度:12毫米
重量:102克

  • SKU HXT2835-3900
  • Brand -
  • 重量(g) 150.00
  • 长度 0.00
  • 0.00
  • 高度 0.00
  • 千伏(转/ v)的 3900.00
  • 最大电流( A) 40.00
  • 电阻( MH) 0.00
  • 最大电压(V) 12.00
  • 功率(W) 0.00
  • 轴(MM) 3.00
  • 长度B (毫米) 37.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 36.00
  • 总长度E(毫米) 49.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This motor is awesome. My config is 4S 35C 1800 mAH, 40A Plush, 5x5 TGS prop. Have had to End Pt Adj the Throttle of my 12FG down to 40pcnt to limit @45A WOT. With this setup my FUNJET ULTRA accelerates vertically out of sight!!!! I couls try 4.5X4.5 but!!!!!! Great motor!!! Using the limiting, motor is V warm on LDG after 8mins, but longevity should be OK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is awesome. My config is 4S 35C 1800 mAH, 40A Plush, 5x5 TGS prop. Have had to End Pt Adj the Throttle of my 12FG down to 40pcnt to limit @45A WOT. With this setup my FUNJET ULTRA accelerates vertically out of sight!!!! I couls try 4.5X4.5 but!!!!!! Great motor!!! Using the limiting, motor is V warm on LDG after 8mins, but longevity should be OK.

I am using this motor with 3s 2200mAh 25C LiPo batteries and 40A ESCs, in both an EasyStar and a SkySurfer (or Bixler as HobbyKing calls them). Very good performance with an APC 5.5x4.5 prop, and out of this world with a Master Airscrew three-blade 6x4. It turns 21,100RPM on the bench with the MA three-blade, and can climb straight up out of sight. But a 1/2 throttle I've gotten a 26-min flight on the SkySurfer, while doing gentle climbs, occasional stunts, and two 10-second vertical blasts. An excellent motor for those planes, for both gentle flying and for wild&crazy. It would probably deliver high speed in horizontal flight, but these two planes aren't built for that so I haven't tried.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this motor with 3s 2200mAh 25C LiPo batteries and 40A ESCs, in both an EasyStar and a SkySurfer (or Bixler as HobbyKing calls them). Very good performance with an APC 5.5x4.5 prop, and out of this world with a Master Airscrew three-blade 6x4. It turns 21,100RPM on the bench with the MA three-blade, and can climb straight up out of sight. But a 1/2 throttle I've gotten a 26-min flight on the SkySurfer, while doing gentle climbs, occasional stunts, and two 10-second vertical blasts. An excellent motor for those planes, for both gentle flying and for wild&crazy. It would probably deliver high speed in horizontal flight, but these two planes aren't built for that so I haven't tried.

I have mounted this motor on a stryker F27c. the setup was a turnigy 2200mah 3cell lipo, 60amp turigy plush esc and the hxt motor. Well with 4.75*4.75 after 3 min flight motor stopped and landed. the motor was extremely hot. After some hours i tried a 6*4 prop and in less then a minute motor stopped again and again extremely hot and motor caput! What am I doing wrong?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have mounted this motor on a stryker F27c. the setup was a turnigy 2200mah 3cell lipo, 60amp turigy plush esc and the hxt motor. Well with 4.75*4.75 after 3 min flight motor stopped and landed. the motor was extremely hot. After some hours i tried a 6*4 prop and in less then a minute motor stopped again and again extremely hot and motor caput! What am I doing wrong?

I purchased this and mounted it on a stryker f27c. I had this setup, 60amp plush esc, 2200mah 3s 20c turnigy battery and the 2835-3900 motor. esc and motor got extremely hot with 4.1*4.1 prop. tried a 6*4 prop and killed the motor. have I done something wrong?? Was the motor defective????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this and mounted it on a stryker f27c. I had this setup, 60amp plush esc, 2200mah 3s 20c turnigy battery and the 2835-3900 motor. esc and motor got extremely hot with 4.1*4.1 prop. tried a 6*4 prop and killed the motor. have I done something wrong?? Was the motor defective????

I have mounted this motor on a stryker F27c. the setup was a turnigy 2200mah 3cell lipo, 60amp turigy plush esc and the hxt motor. Well with 4.75*4.75 after 3 min flight motor stopped and landed. the motor was extremely hot. After some hours i tried a 6*4 prop and in less then a minute motor stopped again and again extremely hot! What am I doing wrong?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have mounted this motor on a stryker F27c. the setup was a turnigy 2200mah 3cell lipo, 60amp turigy plush esc and the hxt motor. Well with 4.75*4.75 after 3 min flight motor stopped and landed. the motor was extremely hot. After some hours i tried a 6*4 prop and in less then a minute motor stopped again and again extremely hot! What am I doing wrong?

Best motor for 68mm 6 blade edf. 55 amps using turnigy 4s 40c. Makes TWM J10 into a true fighter jet. My jets currently run all turnigy and HK products. My jets are fast and reliable!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best motor for 68mm 6 blade edf. 55 amps using turnigy 4s 40c. Makes TWM J10 into a true fighter jet. My jets currently run all turnigy and HK products. My jets are fast and reliable!

Running this motor on 3cell 2200 turning a 4.1x4.1 apc at 30,000rpm. 25oz speed plane. Simply awesome!!! After repeted abuse it still runs strong. Cant wait for more to come available.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running this motor on 3cell 2200 turning a 4.1x4.1 apc at 30,000rpm. 25oz speed plane. Simply awesome!!! After repeted abuse it still runs strong. Cant wait for more to come available.

This is a great little engine. I am using this on my Funjet (original funjet - not ultra) and have had no problems. The engine is not getting hot at all. I'm running:



- 4.75 X 4.75 prop

- 80amb Turnigy Plush ESC

- Turnigy Nano-tech 11.1v 3000mah battery

- Turnigy Digital high torque bearing servo 16.2g/3.1kg/.16sec



I am very happy with all the gear I have purchsed from Hobbyking!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great little engine. I am using this on my Funjet (original funjet - not ultra) and have had no problems. The engine is not getting hot at all. I'm running:



- 4.75 X 4.75 prop

- 80amb Turnigy Plush ESC

- Turnigy Nano-tech 11.1v 3000mah battery

- Turnigy Digital high torque bearing servo 16.2g/3.1kg/.16sec



I am very happy with all the gear I have purchsed from Hobbyking!

Exelente motor uso em uma asinha de velocidade com hlice 4.75x4.75 speed de 50A

chega a aproxim. 2ookh

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Exelente motor uso em uma asinha de velocidade com hlice 4.75x4.75 speed de 50A

chega a aproxim. 2ookh

mont sur un Stinger (env 95cm) de topmodelcz, avec esc turnigy AE-45A, lipo 3S 2650mh, hlice 4,75/4,75 , a brul aprs 1min plein pot , autrement ,"" sa dmnage "" .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

mont sur un Stinger (env 95cm) de topmodelcz, avec esc turnigy AE-45A, lipo 3S 2650mh, hlice 4,75/4,75 , a brul aprs 1min plein pot , autrement ,"" sa dmnage "" .

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!