注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

ImmersionRC徐工V2 Pro的四轴飞行器工具包,集成印刷配电板

ImmersionRC徐工V2 Pro的四轴飞行器工具包,集成印刷配电板

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
760
SKU:
277000028-0

esc
battery
motor
acc
产品介绍

该ImmersionRC徐工V2 Pro工具包是一个独特的可折叠的四轴飞行器框架,专为发烧友FPV和航拍摄影师/摄像师设计。紧凑的框架设计意味着一旦折叠否则很容易适应任何背包中。在徐工V2折叠臂使用一个独特的锁定机构,它允许快速和方便的折叠,而不需要工具,这使得徐工V2从其折叠形式被带到飞行准备在几秒钟之内。

徐工V2是理想的摄影师/摄像师谁喜欢用小型紧凑框架旅行,它的折叠设计,使得它非常适合徒步旅行者,滑雪者或滑雪板携带到偏远的地方,其实它足够甚至小到度假行囊内包。徐工V2框架从阳极氧化铝武器碳纤维制成,并在刚刚96克重量英寸

徐工V2的设计,以适应DJI纳莎中号V2 GPS飞行控制器和DJI E310调整推进系统,具有4S 5200尺寸LiPoly包使用时,将提供最多20分钟的飞行时间。

完全集成的配电板(PDB)功能的基于EzOSD屏幕显示(OSD)分层显示您的视频饲料重要的飞行数据,例如,电池电压,电流,电流消耗和运行飞行时间计数上。以使用一个FPV相机和的GoPro与无刷万向附加的选项,该进料可以通过使用辅助/备用信道,通过在PDB控制中选择。

徐工V2提供了有益的航班飞行时间在一个紧凑的封装,用全了重约1千克。而在与可选的GoPro相机飞行装在徐工V2 Pro的万向该框架拥有清洁和清晰的视频录像震动免费安装点。

有足够的空间来安装系统,FPV,让你飞上蓝天,并从视图与实时视频新点探索世界的框架。

特征:
•紧凑型折叠架
•轻量级超耐久边框设计
•内置EzOSD与多转子增强
•单电缆连接到EzUHF,充分上行链路状态
•碳纤维车架,数控铣削铝合金武器
•集成遥测下行链路
•USB端口,用于未来升级

眼镜:
最大支柱尺寸:10寸
OSD:EzOSD为主,配合多转子增加
飞行凸轮: 西服FatShark CMOS 600TVL +其他
车架重量:96克
架直径:460毫米
折叠尺寸:240×300×140毫米
电池:5200mAh 4S(14.8V)10C
适用电机:2212 / 920kV

要求:
4×2212 / 920kV无刷电机
4×20〜30安培ESC的
1个多转子飞行控制器
4×10寸的道具
FPV齿轮(可选)
飞行摄像头(可选)

Product
Specifications

额外信息

  • 商品编号:
    277000028-0
  • Brand:
    ImmersionRC
  • 重量(g)
    760.00
  • 长度
    260.00
  • 宽:
    65.00
  • 高度:
    215.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I use it for my pixhawk fc, which is a little too big. But after 2 years experimenting with building my own drone, 1 month ago I switched to the phantom 3, and I am super happy with it, so I just want to say I would suggest a rtf drone for first time users. I find it only fun to experiment, and not to fly with it very regularly, and create great stabilised go pro footage without a hassle.
The frame is good quality, and fairly easy to use. It is strong and very small, so easy to transport.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The highest quality and coolest quad, It folds nicely to fit a back pack , plenty of space to put your electronics
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing quad very good quality fram
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice quad, good quality carbon, haven't built it yet but I can be safe to say it will be awesome
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great foldable frame, good looking. Used 2216 ztw black widow, dji naza lite (mod) with gps. Using DJI naza is highly recommended because the kit comes with a board that gives OSD capaility with DJI as well as EZUHF (which I dont have and iddn't use). It also nicely put in integration of 2 cameras (also includes video switch), vtx, and PPM/GPS connections. Also got the Xugong Gimbal, and after 1st trial, the footage that came out was nice. Despite the pain (challenge, rather) of putting in the 8 damper balls, there is online instructions by Dewey that makes the process easier. The result is a damn good looking quad that is portable. Haven't crashed it, but that makes you want to ensure all solders are glued on, everything including props and motors are well balanced etc. Recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 6 kits, all of them great. The frame is lightweight and strong. I haven't really damaged any parts yet and if I do I have 5 more kits of parts to replace them with. Should last me a long time. I also have a bunch of Multistar 4S 5200 Lipos which give me about 20 minutes of flight time. I am using APM instead of Naza for extra abilities that APM has that Naza doesn't. Overall a really great kit. Not the best price, $200 is leaning on fairly costly for a quadcopter frame. Especially if you buy a lot of the same frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
waiting with anticipation, more to come soon i hope
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Frame,
Er ist das Geld alle male wert wrde ihn mir wieder kaufen.
schade das es ihn nicht im EU Lager gibt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
realy good product.stable flying.. power distribution board and osd perfect. 14 min flying time about 1,7 kg ( 4500 mh 4s 45c battery, fpv equipment and gimbal.)
my xu gong v2:
https://www.youtube.com/watch?v=z6E_yuOh8iE
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A really great lightweight frame. Total takeoff weight with fpv and 6Ah 4s batteries is 1.47 kilos. Being under 1.5 kilos got a full setup is great. Being foldable is great for transporting. I wish they made a version without the OSD, it would bring the price down considerably.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。