New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

KB45-11XL 1000KV无刷内转

KB45-11XL 1000KV无刷内转

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
KB45-11XL
WANT FREE SHIPPING? Click here to find out more!

KB45-11XL 1000KV无刷内转
KV:1000RPM / V
重量:557克
轴:6毫米
尺寸:77x45mm
电压:36V
最高额定功率:2592W
这种规格的电机将完全适合我们更大的5英寸和4.75inch EDF。 (同样的安装孔与轴的尺寸)

我们仍然在等待厂家对这些电机更详细的数据,一旦我们将更新此房源。

  • SKU KB45-11XL
  • Brand -
  • 重量 600.0000
  • 长度 0.00
  • 0.00
  • 高度 0.00
  • 千伏(转/ v)的 1000.00
  • 最大电流( A) 0.00
  • 电阻( MH) 0.00
  • 最大电压(V) 0.00
  • 功率(W) 2592.00
  • 轴(MM) 6.00
  • 长度B (毫米) 77.00
  • 直径C(毫米) 45.00
  • 可以长深(mm ) 75.00
  • 总长度E(毫米) 77.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very powerful motor, is fitted to my Savage 6x6 now :) Good choise

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerful motor, is fitted to my Savage 6x6 now :) Good choise

I run it on catamaran with 10S lipo and 80A turnigy HV ESC, 42mm prop. Motor is overheating in 3 minutes run. Magnets are demagnetised. When I try again ESC dead too. I thing that motor can handle only 40Amps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I run it on catamaran with 10S lipo and 80A turnigy HV ESC, 42mm prop. Motor is overheating in 3 minutes run. Magnets are demagnetised. When I try again ESC dead too. I thing that motor can handle only 40Amps.

Este motor possui um otimo custo beneficio. Um pequeno preo para tamanha potencia. se vc pesquisar no mercado outros motores semelhante em potencia vc ver que ele tem a metade do preo de outros motores com o mesmo numero de watts. Voc precisa abrir pelo menos 03 furos na frente do motor para refrigerar o motor. esta operao vai conservar seu motor por muito mais tempo, aumentando o desempenho do motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Este motor possui um otimo custo beneficio. Um pequeno preo para tamanha potencia. se vc pesquisar no mercado outros motores semelhante em potencia vc ver que ele tem a metade do preo de outros motores com o mesmo numero de watts. Voc precisa abrir pelo menos 03 furos na frente do motor para refrigerar o motor. esta operao vai conservar seu motor por muito mais tempo, aumentando o desempenho do motor.

This motor is good just for 8S in use with 4,5" HAOYE EDF, I measured with 10S Zippy Flightmax 5000 mAh 25-35C with 120A ESC on low timming more than 144 A !!! motor was so hot after 15 seconds of running. Here is test video: http://www.youtube.com/watch?v=iyeqknWOOB4

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is good just for 8S in use with 4,5" HAOYE EDF, I measured with 10S Zippy Flightmax 5000 mAh 25-35C with 120A ESC on low timming more than 144 A !!! motor was so hot after 15 seconds of running. Here is test video: http://www.youtube.com/watch?v=iyeqknWOOB4

A good motor, used 2 in a 56" cat.



But the big problem is it gets very hot and I burnt them both. The magnet lost its power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A good motor, used 2 in a 56" cat.



But the big problem is it gets very hot and I burnt them both. The magnet lost its power.

you all are right this tor runs a to hot so I deciededto drillhlesinthefront and back plate but as one of you said it was not a good idea due to the metl shavings, welthat problem was solved I was able to remove the plates.they came off real easy I made a puller that attached to the front plate attached 4screws and with a ittle pessurethe back plte poped off first , I took out the drive part of the mtor which is a real strong magnet,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

you all are right this tor runs a to hot so I deciededto drillhlesinthefront and back plate but as one of you said it was not a good idea due to the metl shavings, welthat problem was solved I was able to remove the plates.they came off real easy I made a puller that attached to the front plate attached 4screws and with a ittle pessurethe back plte poped off first , I took out the drive part of the mtor which is a real strong magnet,

Liebe PB Freunde, 4 Lcher auf beiden Seiten, dahinter einen Ventilator, funktionierende Wasserkhlung (bereits ab ca.35km/h), Timing low, 42mm PROP, 10S Polyquest 4500mA/h. Fahrzeit 1,2min. Stop, berprfung! Anscheinend alles OK. Temp.58 Grad. Kurze Pause. Ventilator weiterlaufen lassen. Dann nochmal 1 min. und BOOOOOOOM Motor und Regler Geschichte...ist doch kein Lehner! Geldbrse lsst Gren, ich schie mir ins Knie! )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Liebe PB Freunde, 4 Lcher auf beiden Seiten, dahinter einen Ventilator, funktionierende Wasserkhlung (bereits ab ca.35km/h), Timing low, 42mm PROP, 10S Polyquest 4500mA/h. Fahrzeit 1,2min. Stop, berprfung! Anscheinend alles OK. Temp.58 Grad. Kurze Pause. Ventilator weiterlaufen lassen. Dann nochmal 1 min. und BOOOOOOOM Motor und Regler Geschichte...ist doch kein Lehner! Geldbrse lsst Gren, ich schie mir ins Knie! )

It's a powerful motor, but it runs hot. I use it in my 32' catamaran with octura x646 on 6s li-po

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a powerful motor, but it runs hot. I use it in my 32' catamaran with octura x646 on 6s li-po

Liebe PB Freunde, der Motor hat schon Kraft, das stimmt, jedoch rennt er so richtig heiss!

eine gnstig alternative zu Lehner Motoren ist er, aber unbedingt Lcher an beiden Seiten anbringen, Wasserkhlung anfertigen die schon bei geringem Speed khlt, (nicht durchs Ruder), Timing runter. Damm hat man lnger Spass damit. Sonst brennt man den Motor sehr schnell ab. Ist so! lg max

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Liebe PB Freunde, der Motor hat schon Kraft, das stimmt, jedoch rennt er so richtig heiss!

eine gnstig alternative zu Lehner Motoren ist er, aber unbedingt Lcher an beiden Seiten anbringen, Wasserkhlung anfertigen die schon bei geringem Speed khlt, (nicht durchs Ruder), Timing runter. Damm hat man lnger Spass damit. Sonst brennt man den Motor sehr schnell ab. Ist so! lg max

I need more info about this motor and how to open cooling holes front and back

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I need more info about this motor and how to open cooling holes front and back

  1. 1
  2. 2
  3. 3

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!