New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

KD 36-28S无刷先驱者1140Kv

KD 36-28S无刷先驱者1140Kv

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
KDA36-28S
WANT FREE SHIPPING? Click here to find out more!

KA36-28S
恒:1140kv
电池:前列地3CELL
工作电流:15A
峰值电流:25A
建议道具:10x5

KDA36-28S
轴尺寸:5.0毫米x 20毫米
电机尺寸:37.4毫米点¯x30毫米
重量:79克

  • SKU KDA36-28S
  • Brand -
  • 重量 120.0000
  • 长度 0.00
  • Packaging Width 0.00
  • 高度 0.00
  • 千伏(转/ v)的 1140.00
  • 最大电流( A) 25.00
  • 电阻( MH) 0.00
  • 最大电压(V) 11.00
  • 功率(W) 0.00
  • 轴(MM) 5.00
  • 长度B (毫米) 30.00
  • 直径C(毫米) 37.00
  • 可以长深(mm ) 11.00
  • 总长度E(毫米) 50.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I noticed with a 3S (2000maH): only 7700 rpm with a 10.5X6 propeller and 9200 rpm with a 9x6 propeller. It look like more a 900 kV motor rather than a 1140 kV. Maybe you can get higher rpm with smaller propeller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I noticed with a 3S (2000maH): only 7700 rpm with a 10.5X6 propeller and 9200 rpm with a 9x6 propeller. It look like more a 900 kV motor rather than a 1140 kV. Maybe you can get higher rpm with smaller propeller

Great little motor,I have this motor on a scratch built Al Eastman Ampmeister 900mm wing span 500gm AUW with 30a SS Hobby King ESC and 3s 2200mah Turnigy lipo APC 9*6 apc prop.I've run small amount of thin cyano between outer can and magnets and a very thin smear of epoxy on windings and oil bearings lightly. Motor has lasted 2 years with a total of approx 500 hard flights unlimited vertical performance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor,I have this motor on a scratch built Al Eastman Ampmeister 900mm wing span 500gm AUW with 30a SS Hobby King ESC and 3s 2200mah Turnigy lipo APC 9*6 apc prop.I've run small amount of thin cyano between outer can and magnets and a very thin smear of epoxy on windings and oil bearings lightly. Motor has lasted 2 years with a total of approx 500 hard flights unlimited vertical performance.

I have had this motor running flawlessly for 2 years in an Ampmeister 800mm wingspan using 9*6 prop ,40a Hobby King ESC with Zippy 1500mAh 30c ,340W of awesomeness with vertical performance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had this motor running flawlessly for 2 years in an Ampmeister 800mm wingspan using 9*6 prop ,40a Hobby King ESC with Zippy 1500mAh 30c ,340W of awesomeness with vertical performance.

I use it with Phoenix Magic with 11x5.5 APC prop and Turnigy Nano-tech 1600 mah 25-50c.Item isnt arrived to me yet.I will write my comment which is about this motors performance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it with Phoenix Magic with 11x5.5 APC prop and Turnigy Nano-tech 1600 mah 25-50c.Item isnt arrived to me yet.I will write my comment which is about this motors performance

I see mixed reviews on this motor ,I paired mine up with a turnigy 40 amp speedie and 2250 3 s lipo with 10x 6 folding prop ,but burnt out at 50% throttle on test ,was drawing 33 amps! not happy !Other people have run exact combination with no problem?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I see mixed reviews on this motor ,I paired mine up with a turnigy 40 amp speedie and 2250 3 s lipo with 10x 6 folding prop ,but burnt out at 50% throttle on test ,was drawing 33 amps! not happy !Other people have run exact combination with no problem?

I use it on a Flitework Edge (RedBull Design) with 11x7 APC Prop, Mystery 30A Controller and Rhino 1350 3s packs. Draws around 23 Amps on full throttle (around 330W) and goes unlimited vertical with the ~700g model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it on a Flitework Edge (RedBull Design) with 11x7 APC Prop, Mystery 30A Controller and Rhino 1350 3s packs. Draws around 23 Amps on full throttle (around 330W) and goes unlimited vertical with the ~700g model.

Put this motor on the GWS Me-109. Just fits and balances the plane out perfectly with an 1800Mah battery and a 40amp Mystery speed controller. A 10x4.7 prop seemed to work fine pulling 32amps at 330 Watts but motor and speed contoller got very hot. I'm now running with a 9x6 prop with 28amps and 288watts. pulls straight verical and runs great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put this motor on the GWS Me-109. Just fits and balances the plane out perfectly with an 1800Mah battery and a 40amp Mystery speed controller. A 10x4.7 prop seemed to work fine pulling 32amps at 330 Watts but motor and speed contoller got very hot. I'm now running with a 9x6 prop with 28amps and 288watts. pulls straight verical and runs great.

Running with an 11-7 prop with no problems. I've got a dozen flights on it. Runs very quiet. Very satisfied.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running with an 11-7 prop with no problems. I've got a dozen flights on it. Runs very quiet. Very satisfied.

iv put this on a mini ultra stick 311watts, 28 amps ,apce10-5, 3 cell excelent for this plane.A++++++++++

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

iv put this on a mini ultra stick 311watts, 28 amps ,apce10-5, 3 cell excelent for this plane.A++++++++++

Perfecto motor para montarlo en un cesnna skyartech, aunque es grande es superpotente con una apc 8x6 y una 3s de 2200 mah, consumo de 25 A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfecto motor para montarlo en un cesnna skyartech, aunque es grande es superpotente con una apc 8x6 y una 3s de 2200 mah, consumo de 25 A

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!