注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

KDA 28-57 15Turn大号无刷内转

KDA 28-57 15Turn大号无刷内转

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
189
SKU:
KB28-57-15L
产品介绍

KDA 28-57 15Turn大号无刷内转

KB28-57-15L
轴尺寸:??³3.17mm〜12毫米
电机尺寸:??³27.6mm〜57毫米
重量:173克

电机规格。
KV:1900
空闲电流 :.8A
阻力位 :0.0399
最大电流 :27A

Product
Specifications

额外信息

  • 商品编号:
    KB28-57-15L
  • Brand:
    N/A
  • 重量(g)
    189.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
  • 千伏(转/ v)的
    1900.00
  • 最大电流( A)
    27.00
  • 功率(W):
    0.00
  • 长度B (毫米):
    57.00
  • 可以长深(mm )
    55.00
  • 最大电压(V)
    0.00
  • 轴(MM):
    3.00
  • Unit Weight (g):
    173
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    69.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
very good and very strong i use in my rc catmaran very fast at 6c
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This Motor does good work in 4S.

However, Motor becomes the high heat in 5S very much.

The power of Motor weakens very much.

The buyer must understand it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The power that Motor is splendid in the case of 4S.

However, 5S and the use of 6S are impossible.

Motor is high heat.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pretty nice motor was tested with 3" HK OR003-00109-7B ducted fan

Max 70 A on 6S1p 3000 20C

Smooth bearings
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The motor performs well, but be sure to tighten the front of the bearing housing. It is threaded on NOT pressed and mine loosened when I gave it full throttle in my 3" Hoye fan. I had to disassemble the unit to repair it. For this I give it 4 stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am running this in a HET Mini Fan on 5 cells and it works great. I will add the test results when I get them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
actually, scratch that, the shaft wasn't 2.8 it was 3.17, my calipers were wrong... sorry...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the unit i was supplied was actually 2.8mm shaft...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It is a heavy, quality motor, therefor can be run at higher power leval in practice. I tested it in a 3 inch (80 mm) ducted fan unit. With a 4 cell battery, it only drew 21 Amps. Requires at least a 5 cell lipo, unless used in a bigger fan unit. One reservation is the poor soldering of connectors. They came off after few unplugging. Recommend resoldering before use. Very smooth in operation.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running this motor in a AP-700 fan in a AFA-F-20. Great performance, first flight 2.5 min using 1100 mah out of the battery. Speed est 110 mph after landing checked motor for temp 3 min after landing 90 degrees F.



Setup:

6S1P 3200 mah 20C Lipo

60A Vigor esc.

Watt meter reading at 100%

39A 875W

28mm Align motor heatsink using Artic Silver thermal grease.



F-20 all up weight 4lbs, First flight 2.5 min. 100 ft loop from level flight no problem plenty of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。