New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Kingduino APM外部LED模组

Kingduino APM外部LED模组

Shipped From:
  • USA
QTY:

Now save 保存 AU$ 1.38 AU$ 1.38

Special Price AU$ 4.15 AU$ 4.15

You save 保存 AU$ 1.38 AU$ 1.38

Was  AU$ 5.53

状态:
有货
SKU:
387000062-0
WANT FREE SHIPPING? Click here to find out more!

外部状态LED模块,西服Arducopter 2.5〜2.6。

特征:
•APM状态显示
•2个独立的红/蓝LED灯
•直接插入APM A6〜A7端口

外形尺寸:
长度:40.5毫米
宽度:11〜18毫米
深度:4.7毫米
信息长度:250毫米

*注:这是不是一个原始的Arduino品牌的产品。

  • SKU 387000062-0
  • Brand -
  • 容量(mAh) -
  • 重量 16.0000
  • 长度 45.00
  • 10.00
  • 高度 20.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very small module.
You can connect this to the A6 and A7 of your APM 2.x and will provide you a very bright led indicators.
If you are running Arducopter 3.1.5 or before, you have to activate the led output in mission planner. On 3.2.x or later its's already activated by default.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very small module.
You can connect this to the A6 and A7 of your APM 2.x and will provide you a very bright led indicators.
If you are running Arducopter 3.1.5 or before, you have to activate the led output in mission planner. On 3.2.x or later its's already activated by default.

Very bright leds and easy to install on APM. I only wish it had some kind of case to mount it in or shipped with some clear heat shrink to help protect it from moisture

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very bright leds and easy to install on APM. I only wish it had some kind of case to mount it in or shipped with some clear heat shrink to help protect it from moisture

Just pluged into my APM 2.6 with no problem. A6 and A7 pins but had to change the LED_MODE parameter to 3 using mission Planner. It works like a charm! Very useful.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just pluged into my APM 2.6 with no problem. A6 and A7 pins but had to change the LED_MODE parameter to 3 using mission Planner. It works like a charm! Very useful.

Ordered this for mt HKPilot Mega and works like a charm! 2 Leds (Blue and Red) for Arm and GPS indication. Chip board is well made and has 2 holes for mounting. The 3 wired servo connector connects to A6 for GPS Lock indication (Blue) and the single connector connects to A7 for Arm/DisArm indication. Once plugged in, they flash similar to the small LEDS on the board but now externally and pretty bright even being powered by from the FC! Wires connect directly. In case anyone is wondering, yes the red wire in the 3 wire connector needs to be plugged into the FC, This powers the LED board (shown by a tiny blue LED indicating power in). The Main Blue/Red LEDS will start flasing once connected! Recommended for a small and great add on to the Pilot Mega board!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered this for mt HKPilot Mega and works like a charm! 2 Leds (Blue and Red) for Arm and GPS indication. Chip board is well made and has 2 holes for mounting. The 3 wired servo connector connects to A6 for GPS Lock indication (Blue) and the single connector connects to A7 for Arm/DisArm indication. Once plugged in, they flash similar to the small LEDS on the board but now externally and pretty bright even being powered by from the FC! Wires connect directly. In case anyone is wondering, yes the red wire in the 3 wire connector needs to be plugged into the FC, This powers the LED board (shown by a tiny blue LED indicating power in). The Main Blue/Red LEDS will start flasing once connected! Recommended for a small and great add on to the Pilot Mega board!

plug n play apm analog output 4 and 6. mimmics the red a blue APM board led's for armed and GPS lock. Put a KK piezo buzzer on channel 5 for audible alerts

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

plug n play apm analog output 4 and 6. mimmics the red a blue APM board led's for armed and GPS lock. Put a KK piezo buzzer on channel 5 for audible alerts

No File Name Download [56]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!