New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Kingduino欧诺R3兼容微控制器 - Atmel的ATmega328

Kingduino欧诺R3兼容微控制器 - Atmel的ATmega328

Shipped From:
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 15.80
状态:
有货
重量:
75
SKU:
381000030
WANT FREE SHIPPING? Click here to find out more!

Arduino的乌诺是一个基于ATmega328的微控制器板。它有14个数字输入/输出管脚(其中6可以用作PWM输出),6个模拟输入,16 MHz的晶体振荡器,USB连接,一个电源插孔,ICSP插头,和一个复位按钮。它包含支持微控制器所需的一切;简单地把它用USB线或电源其与AC到DC适配器或电池连接到电脑上手。

欧诺不同之处在于它不使用FTDI USB到串行驱动器芯片之前的所有板。相反,它采用了Atmega16U2(Atmega8U2最高版本为R2)编程为一个USB转串口转换器。

欧诺板的修订版2具有电阻上拉的8U2 HWB线接地,使其更容易把进入DFU模式。

主板3具有以下新的特点:
1.0引脚:增加了SDA和SCL引脚是靠近AREF与放置在靠近RESET引脚,该IOREF允许屏蔽,以适应从董事会提供的电压其他两个新的引脚。今后,盾牌将兼容这两种与使用AVR,(其操作@ 5V)的董事会,并与Arduino的是由于操作@ 3.3V。第二个是一个不连接销,即保留用于未来用途。


*注:
这不是一个原始的Arduino品牌的产品,它是用相同的组件和功能由不同制造商制造的。


眼镜:
微控制器:ATmega328
工作电压:5V
输入电压(推荐):7-12V
输入电压(限制):6-20V
数字I / O引脚:14(其中6提供PWM输出)
模拟输入引脚:6
每个I / O引脚直流电流:40毫安
直流电流为3.3V引脚:50毫安
闪存:32 KB(ATmega328),其中用于引导程序0.5 KB
SRAM:2 KB(ATmega328)
EEPROM:1 KB(ATmega328)
时钟速度:16MHz的

包括:
1个Arduino的乌诺R3微控制器板
1个USB电缆

  • SKU 381000030
  • Brand -
  • 容量(mAh) -
  • 重量(g) 75.00
  • 长度 150.00
  • 25.00
  • 高度 110.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

Excelente calidad en la fabricacion lo recomiendo ampliamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente calidad en la fabricacion lo recomiendo ampliamente

not the orginal Arduino but bootloader is preinstalled and all works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not the orginal Arduino but bootloader is preinstalled and all works fine.

Arduino... novos desafios, vamos l!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arduino... novos desafios, vamos l!

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

921137919X677897X37.jpg Download [16]
921137919X677897X43.png Download [2]
921137919X677897X59.png Download [11]
sensorshield Download [184]
arduandjoy Download [189]
sensorsheld Download [56]
sensorshieldpinouts Download [153]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save