机身长：720毫米翼展：890毫米飞行重量：450克动力系统：1250kv无刷外转子ESC：18A螺旋桨：8×6电池：2细胞7.4V - 1300mAh的锂聚合物 （不包括）电池仓尺寸：90×45×23毫米
les servos sont changer , la batterie , prendre une 3 S 1.OOO
une fois bien rgler , le vol est magnifique , le modle est super piloter et le ralisme , nickel .
pour le prix , fantastique , seul les hlices sont aussi de pitre qualit , changer donc pour du bon .Not my best experience with HobbyKing. Fuselage had some poke marks in it, nose had some glue scuffs, motor was glued on an angle, 2 out of 3 servos didnt work properly (very cheap servos!). Hopefully it flies better than the way it came.Received this aircraft very quickly after ordering it. Main issue I had with it, was that the ailerons were warped and twisted. The left hand was so warped that I had to use hot water and a heat gun to correct it. The hinges don't look very strong and in my opinion, need some type of reinforcement such as tape to avoid failure in the air.Llego a Argentina despues de 20 dias,trajo los alerones doblados en las puntas como tambien desalineado el timon,vere como enderesarlos,por eso las 4 coronas,el avion se ve real al original,la semana proxima lo armare y veremos como vuela
Si alguien sabe como trabajar el EPO con el que esta construido se lo agradecere.
cesch01I bought one these from another business. I upgraded the motor and ESC with the TowerPro combo from HK. It flies like a rocket. Before the upgrade it crashed into the grass. I could fix it in 5 minutes. You have to love this EPO foam airplane.Fast plane ! ESC can handle 3s Lipo! Original Aileron setup is fair and need to be ajust to be more agressive. Mine was a little bit tail heavy. Propeller are very cheap and broked every time I landed.I just received my model. It is wonderful model and arrived without damage. I recommend.
If I'd like to use a 3s battery I need to change the original engine? Some body help me !!!!
Acabei de receber meu modelo e achei fantstico, tima qualidade. O melhor chegou inteiro sem nenhum defeito ou dano. Recomendo.Werde mir das Modell ebenfalls zulegen. Kumpel hat das modell bereits und ist hochzufriedenThis is a nice model for the amount of money. Although shipping it to Germany really sucks, but that is not HKs fault. However for that money do not expect some super high quality airframe. Some details are just not as precise as you would expect them to be from a higher priced product e.g. from PKZ foamies. The ailerons had to be redone. Putting the LiPo was also a bit tricky as the opening is too big and does not hold the pack by itself, so needed to fix it, used foam and velcor to do the job, no big deal, but added to time to build. The manual is a pain in the back. Pictures are so small that details are hard to see. But most of all is that I could not find the COG ! And I never fly without proper COG again, it costs too much money -)
The paint job jhowever is adone really nicely (though the yellow at the rear seems to be done after the blue and is a bit "dirty")
All in all it is good value for the money and I would recomend it to folks that can and want to do a bit of tweaking on it!Super modell... mit 130mA und 3S lipo stimmt der SP und man fliegt ca 10 min.
Ohne Fahrwerk ergibt das Modell einnoch besseres Flugbild (bricht nach der ersten Landung im Gras ab :-)