水星是一个轻量级的，灵活的高性能3D飞机，这将推动你的技能发挥到极致！与碳纤维加固，水星是专为终极3D和超越！光翼载荷，具有大规模超大控制面结合使得这款终极室内3D / F3P飞机。充满活力的配色方案在空中和地面上看起来不错。
机身都是3毫米泡沫结构与碳纤维杆加固机身和机翼部分。碳前缘保持翼僵硬，并且还如果飞入任何东西从损坏保护它。 为了保持挠曲到最低限度，并精确到最大，对汞的副翼与穿过翼碳支柱被充分增强围墙。该套件甚至还包括2204 1700kv电机和支撑保护。只要安装您的电子产品和电池的选择，以获得水星飞行。
•套件 - 建立以满足您的喜好和安装电子选择
2S 7.4V 500mAh的电池lipoly
Bought one of these, arrived quickly and it looked nice while in the box but it's virtually unusable as the black paint used has "eaten" its way almost right through the depron on the ailerons and wings. Similar erosion effect everywhere the black paint's been used. Pity. HK don't seem keen to reply to my enquiry about it either.Wow, this is a real nice plane, very simple to build as long as you have a big, flat surface to build on. All the bits are there to finish it off, including lots of Z bends,CF rod, horns and shrink tubing. Do Not use the supplied Velcro, the glue doesn't stick to the Embossing on the Foam, YMMV. She Flies exactly like one would hope, Like it's on RAILS! total control in any position, slow climbed to hover and it just hung there, and slow rolled with no input, very nice. I don't have video yet, but if you can fly 3D and you want to try a nice F3P Patternship, check this out, cheap and Fun as heck,
BobI have recently finished building this plane and can say that it is quite enjoyable to fly. The build itself took 7 hours. That is from receiving the package to completely built. It arrives in pieces and each need to be taped and glued together. The carbon rod ends also sit inside the foam without any real backing to give them support so expect them to fall out of place pretty much every flight. The foam is especially soft which is good for the weight but means that it will flex pretty badly when picking it up for launch. I didn't bother putting the wheels on as they look way too flimsy for anything except a concrete runway which I would not recommend flying over due to the weakness of the plane if you crash.
In terms of flying it works extremely well, handling all the 3d moves i've tried. Compared to the Mini Saturn we have at home it lacks the build quality but handles 3d way better. I am using a 500mah battery, an orangerx 620 receiver with the case removed, the recommended 8x3 props and a hobby king fixed wing 10a esc. I believe using a slightly longer motor wouldn't have too much of an impact on the flight performance if you were looking to save money by buying a cheaper motor.
CA glue with kicker is essential otherwise this model would be too painful to build. Tape is also necessary for the wings.