它的主要成分是一种ATMEGA328P 8位微控制器与一个Arduino bootloder和MAX7456的单色屏幕显示。这个微小的28x16mm OSD是完美的微米尺寸的应用，但作品一样好与任何兼容MAVlink FC和应用。
微OSD * 1
Great little micro osd .. did a google on how to flash and all was well using ArduCam OSD 220.127.116.11.
I did try other files but things kinda didn't work right (memory issues with firmware not my memory)good OSD work well with crius aiopGood little osd (and i do mean little its tiny)
I have used it successfully with the following OSD Firmwares without issue
flashing was painless for me it seems many others have had issues getting FTDI tool to work but i never encountered any of the problems discussed with this (i use a 5V ftdi that came with a multiwii i got ages ago)
Works very well.
I updated it to R800 with no issues.
It can be configurated all in 2 panels, battery and rssi warnings.
it's a pain in the ass. I have no camera image and information on screen. If I plug the camera directly on the vtx, I have image, but when I plug the osd between both, no image at all. I can't find a manual in the internet. A product like that must have a manual.Good size, but its turn extremelly hot! Works well but I recomend to install it on a place with enought airflow.Really nice OSD, although the cable for plugging into my TX was not OK. I had to solder the solution out.Works great after minimal setup. I highly recommend you buy an FTDI connector so you can update and customize the firmware, so you can configure your screen. They are cheap, so buy one with this unit.Not sure yet what this is going on, but it looks well made and simple to use.