New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

微HKPilot遥测台收音机,集成PCB天线433MHZ

微HKPilot遥测台收音机,集成PCB天线433MHZ

Shipped From:
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 56.33
状态:
有货
重量:
44
SKU:
387000066-0
WANT FREE SHIPPING? Click here to find out more!

这种新的微HKPilot遥测收音机让你比如我们HKPilot兆或Multiwii AIO到USB或UART配备设备链接到飞行控制器,如电脑,笔记本电脑或平板电脑支持USB连接(OTG)。新的微型收发器具有集成的PCB天线,使得可使用SIK固件最小的遥测解决方案这一个。微型尺寸,现在让我们小四边形和飞机有一个完整的下行就像他们更大的对口。在集合匹配的地面收发器可以使用UART或USB连接电脑,甚至OTG功能的设备。无线电设置,不仅可以让你看到实时数据,如覆盖在地图上实时GPS定位,系统电压,航向,航点导航甚至人工地平线和这么多。使用开源MAVlink地面站软件,你甚至可以用操纵杆通过计算机和更新设置,住飞你的飞机!或者只是用它为你需要一个无线串行接口DIY项目。该套件提供了一个很好的低价,微型尺寸和卓越的性能。该系统采用433MHz的频段,并提供了使用HopeRF的HM-TRP模块运行定制的,开源固件全双工链路。

特征:
•超微型尺寸只是1.6克集成PCB天线
•微型USB端口,用于地​​面模块上OTG / USB链接
•100mW的最大输出功率(可调)
•-117dBm接收灵敏度
•基于HopeRF的HM-TRP模块
•2路全双工自适应通过TDM通信
•UART接口/ USB
•透明串行链路
•MAVLink框架协议
•跳频扩频(FHSS)
•可配置的占空比
•纠错校正到bit错误的25%
开源固件SIK
•通过*任务规划和* APM规划配置

规格微型收发器:
电源电压:3.7-6 VDC
传输电流:100毫安20 dBm的
接收电流:25毫安
串行接口:3.3 V UART
尺寸:19x25x5mm(含天线)
重量:1.6g(含天线)

规格地面收发器:
电源电压:3.7-6 VDC(从USB或DF13连接器)
传输电流:100毫安20 dBm的
接收电流:25毫安
串行接口:3.3 V UART
尺寸:25.5x 53x11 ​​毫米(不含天线
重量:11.5克(不含天线)

包括:
一个微遥测收发433MHZ
一个Gound USB遥测收发433MHZ
微型USB电缆
Android的OTG转接线
微型遥测微HKPilot大型电缆

频率规定因国家而异,所以请咨询当地空域当局找出哪些频率在您所在地区的法律。

*注:APM的参考是指ArduPilot项目,基于Arduino的开源计算平台,通过3DR和开源社区开发对一个家庭的开源自动驾驶仪。它由ArduPilot兆(APM)电子的选择和各种免费软件版本不同的车辆,并通过一个开放源码的Creative Commons license的约束

*注:这是不是一个原始的Arduino品牌的产品。

  • SKU 387000066-0
  • Brand H-King
  • 容量(mAh) -
  • 重量(g) 44.00
  • 长度 110.00
  • 45.00
  • 高度 70.00
  • HK Pilot Micro

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have used this telemetry set with an APM 2.8. There you need to use a 5 pin connector (not included here; included is only a 4 pin connector) to fit to the telemetry connector of the APM 2.8.

I am using this setup, because there is no free frequency left for telemetry so i use this radio to connect wirelessly to my APM 2.8. Never lost the connection yet.

I have used this set to connect the APM to my laptop or smartphone. Everything works fine out of the box. (Important: use 57600 baud).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used this telemetry set with an APM 2.8. There you need to use a 5 pin connector (not included here; included is only a 4 pin connector) to fit to the telemetry connector of the APM 2.8.

I am using this setup, because there is no free frequency left for telemetry so i use this radio to connect wirelessly to my APM 2.8. Never lost the connection yet.

I have used this set to connect the APM to my laptop or smartphone. Everything works fine out of the box. (Important: use 57600 baud).

works great, be aware that it does not(out of the box) fit the larger hkpilot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great, be aware that it does not(out of the box) fit the larger hkpilot

Oh you need this if you've got a hkpilot works well easy to use but remember you can arm the hkpilot with it and that can be problematic

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Oh you need this if you've got a hkpilot works well easy to use but remember you can arm the hkpilot with it and that can be problematic

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save