注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

微动力系统W /变速箱GPS-7

微动力系统W /变速箱GPS-7

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 10.73
Rating:
Stock:
重量:
17
SKU:
GPS7

Price War

产品介绍
刷微动力系统为室内传单。
产品规格:
类型:拉丝
外形尺寸:16×7毫米
轴长度:5毫米
轴直径:1毫米
重量:3.3g
最大电流:1.8A
转速:在无负载3V / 40,000rpm
建议的道具:GWS 4530
测试数据;
道具:GWS 5030
电压:3.3,3.8,4V
电流:0.76,0.89,0.93A
瓦:2.508,3.382,3.72W
推力:31,36,38
效率(G / W):12.36,10.64,10.22
道具:GWS 4530
电压:3.8,4V
电流:0.81,0.87A
瓦:3.078,3.48W
推力:32,35
效率(G / W):10.40,10.06
Product
Specifications

额外信息

  • 商品编号:
    GPS7
  • Brand:
    N/A
  • 重量(g)
    17.00
  • 长度
    68.00
  • 宽:
    17.00
  • 高度:
    60.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Is used for electronically reversible radar screen
Quality
Value
Overall
Quality
Value
Overall
I got two of these, and they weigh an average of 3.575g out of the packet. The prop shaft extends 18.5mm beyond the front face of the large gear. The prop bushing at the tip of the shaft is 7mm deep and has a 4mm diameter. GWS props with a 4mm ID prop hubs will press-fit nicely onto these. Both my units came with their main shafts feeling rather tight to rotate by hand. I connected the motor to a variable DC power source and powered them with 1V, slowly increasing it to 3V. Initially the no-load

current draw was 400mA. Left to run for about a minute like this, you can hear the revs go up, and eventually the no-load current was only 100mA. After that, the main shaft felt very easy to rotate by hand, it was no longer tight. I think the retaining bushing was pressed on too tight, but the above method was able to break-in both my units.

Quality
Value
Overall
Quality
Value
Overall
Nice and light motor/gearbox combo. While the power output with a GWS 5x3 is a bit less than stated it works well in my micro aircraft with a 130mAh 1S battery and the HK brushed micro ESC. The propeller fits well on the shaft adapter, but care must be taken to not bend the tiny shaft.
Quality
Value
Overall
Quality
Value
Overall
I like it! I am flying a 20g depron/mylar, rudder/elevator model using a gws 5x3 prop and a nanotech 130mAh cell and a vapor brick. Cruises on 1/2 power with excellent duration. Probably unsuitable for 3D?

Steve
Quality
Value
Overall
Quality
Value
Overall
Wonderful thing!

I added this to my Kyosho Minium 4 Ch, which was a bit underpowered right out of the box. I added a GWS EP Propeller (DD-5030 127x76mm) and now the plane works quite fine!
Quality
Value
Overall
Quality
Value
Overall
The small diameter (1 mm) is soft and very easily bent. That said, use of a homemade propsaver aids greatly. For the cost, a viable Indoor sport motor for my 21.5 gr. AUW foamies.
Quality
Value
Overall
Quality
Value
Overall
Much smoother than the 6mm unit but why the long shaft ? The prop adapter is very eccentric making the prop run way out of true. weight 3.3grams
Quality
Value
Overall
Quality
Value
Overall


"You might find further reviews (displaced by s/w malfunction) on:



http://www.hobbyking.com/hobbycity/store/product_reviews.asp?idproduct=1000#review"



Quality
Value
Overall
Quality
Value
Overall
The perfect parkzone replacement
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。