存在PNF它是一个快速构建，功能强大的EDF单位/ ESC组合是预装的都是伺服的。这种模式是一个很好的规模和需要一个4S Lipoly达到什么样的性能，你所寻找的，也为此类中一个不错的改变，Lipoly车厢被设计成采取像样的飞行时间一个大包。
你自己的TX / RX最低6通道
3200mAh 4S Lipoly电池
I decided to go for a power upgrade on my Mig 15 right from the get go as I have had much lighter 70mm jets with similar spec 4s fan units give quite slack performance.
I went for an Eflite BL15 3200kv motor & matching 5 blade impellor with a Turnigy Plush 80 amp speedie running a 3000mah 40c 5s lipo. This setup pulls around 1100 watts @ 65 amps & gives excellent performance & 4 minute flight endurance. The BL15 motor is quite happy to run the 5s setup on its stock 5 blade fan with low esc timing to keep it safe.
Flights so far have been quite locked in & the Mig tracks well performing all the standard manoeuvers with strong climb out ability. Landings are relatively slow & easily controlled with flaps deployed. Both main retracts mountings needed to be re glued to prevent them being pulled out with grass strip landings.Awesome jet and nice size, everything arrived in great condition , and works great, because of reviews of it being underpowered I've chucked in a 70 mm changesun and a cyclone motor, the only prob I have is when I use the flaps and airbreaks on one channel the airbreaks pop out and flaps go level, I switch it off and flaps come on and airbreaks go back in? Any ideas how to fix the probEn caso de romper alguno de los trenes remplazar por:
Digital Servoless Retractable system (2.5kg)
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idproduct=12883i just upgrade my EDF and Battery ! its more speed and fun ! http://www.youtube.com/watch?v=ILDj3lgup10Don't know what happened to my original review but, I'll try again.
This is an excellent flying airframe. It flies OK with stock equipment but, I upgraded to a larger fan, motor, and ESC and continued to use the same 4s 3300mah Turnigy batt. I'm getting about 5 min. flight time.
The addition of the 3700kv motor and a thrust tube has really unleashed the performance in this bird. I've haven't reinforced anything on the airframe and it's holding up fine. It now flies with authority and power to spare.
RJI received the plane yesterday and is almost ready to roll.
The quality is very high. It includes a separated BEC to cope with the 8 servos 3 e-tracts.
The color (red-silver) is very nice and I'm sure it will be highly visible.
The design is excellent also the scale looks.
The size is good enough to fit in a midsize car booth. But also for good visual in the air.
Just a couple of observations:
-The retracts are not flush with the wing and a piece of plywood was added to clear the wheel from hitting the bottom of the well. In my opinion, a better designed scale landing gear and a thinner wheel could help. The screws were not long enough to hold the LG.
-Some details, like the guns, are not well finished, and they should be done on formed plastic instead of foam.
I give 4 stars in quality, and 5 overall because I really like it.
Tomorrow will be the flight test.check out the review below from youtube of the MIG up close
looks pretty cool
MIG15 servo Rudder connection ?? download now [988kb] MIG15 turbina download now [629kb] MIG15 turbina 2 download now [658kb] MIG15 turbina 3 download now [634kb] MIG15 C.G download now [84kb] MIG15 C.G download now [84kb] MIG15 C.G download now [84kb] FRONTAL LANDING GEAR CONECTION BAY NESTO download now [145kb]