New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

独白F3A特技模式示范1200毫米(ARF)

独白F3A特技模式示范1200毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
327000002
WANT FREE SHIPPING? Click here to find out more!

F3A型号的设计只有一个工作于心,飞好!该独白是一个很好的价格和有吸引力的期待特技飞行模式,可在空中便宜和快速。

机身是轻和吸引人的覆盖已经熟练应用中,独白还具有很好的彩绘玻璃纤维整流罩和坚韧的尼龙轮口角。对于实用性的独白酒店在翼2PC插头和CF翼管,硬件非常出色,并设有CF控制棒和GF控制角。船舶图案像独白做出辉煌的运动模型飞行,因为他们可以处理一点点风,也不管你飞行的,他们做高档实用特技飞行的机型,尤其是在这个价格!

眼镜:
翼展:1200毫米
长度:1300毫米
飞行重量:1200克

要求:
你自己的4通道TX / RX
35毫米无刷外转子900kv或以下
4×9克伺服
40A ESC W / BEC
2200mAh的〜2650mAh 3S Liploy电池

  • SKU 327000002
  • Brand -
  • 容量(mAh) -
  • 重量 2825.0000
  • 长度 1085.00
  • Packaging Width 195.00
  • 高度 335.00
  • Monolog F3A Balsa Kit

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A great little pattern practice plane - no rudder/aileron couple required so flat cicles and sustained knife edge very easy. Slowrolls for as long as you like. Spins and snaps very precise.I like it alot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A great little pattern practice plane - no rudder/aileron couple required so flat cicles and sustained knife edge very easy. Slowrolls for as long as you like. Spins and snaps very precise.I like it alot

terrible quality....i had to keep modifying things to make it work

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

terrible quality....i had to keep modifying things to make it work

Flies ok, very stable in the air - but beware for missing assembly parts in the box for this ARF version and wrinkled attached ora-cover - choose 4s setup for

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flies ok, very stable in the air - but beware for missing assembly parts in the box for this ARF version and wrinkled attached ora-cover - choose 4s setup for

hi, first of all I had more than 40 ARF from HK before, but this one was the worst, for the value its fair as its only 70$ which is not bad at all, my set up was Turnigy 3648 850kv, APC 13x10, HK 80A ESC, 4 Turnigy MG90S Metal Gear Servo, Turnigy 2200A 3S 40C. 1- This is not a pattern plane, more to the 3D side. 2- The quality is ****, the worst I seen. 3- No way to fix in the canopy, had to tape it before each flight. 4- very ***r landing gear, will bend with each take off and landing. 5- The wing tube diameter is wrong, have to sand the tube inside the plane, by the way its a ***r card board tube!!! 6- Stupid way for the Elevator and Rudder servos to put in!!!!!! 7- The wing doesn't fit in the fuselage, a lot of sanding and it won't fit perfect at the end too. 8- After a lot of work and effort, it flied well, can stand wind, but its not pattern, with the 3D elevator supplied its like a mixed pattern 3D plane, nothing special in it. Last issue the wing bolts are a disaster as they are a small piece of ***r ply wood and not fixed strong to the wing and I didn't notice this as I never expected that, which broke during rolling and one wing rotated which caused a crash in its second flight, broken fuse, motor and ESC, the rest ok as I cut throttle as it was rolling directly to ground!!!!!!!! I didn't even complain to HK as I don't expect anything from them, I just wrote this revie

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hi, first of all I had more than 40 ARF from HK before, but this one was the worst, for the value its fair as its only 70$ which is not bad at all, my set up was Turnigy 3648 850kv, APC 13x10, HK 80A ESC, 4 Turnigy MG90S Metal Gear Servo, Turnigy 2200A 3S 40C. 1- This is not a pattern plane, more to the 3D side. 2- The quality is ****, the worst I seen. 3- No way to fix in the canopy, had to tape it before each flight. 4- very ***r landing gear, will bend with each take off and landing. 5- The wing tube diameter is wrong, have to sand the tube inside the plane, by the way its a ***r card board tube!!! 6- Stupid way for the Elevator and Rudder servos to put in!!!!!! 7- The wing doesn't fit in the fuselage, a lot of sanding and it won't fit perfect at the end too. 8- After a lot of work and effort, it flied well, can stand wind, but its not pattern, with the 3D elevator supplied its like a mixed pattern 3D plane, nothing special in it. Last issue the wing bolts are a disaster as they are a small piece of ***r ply wood and not fixed strong to the wing and I didn't notice this as I never expected that, which broke during rolling and one wing rotated which caused a crash in its second flight, broken fuse, motor and ESC, the rest ok as I cut throttle as it was rolling directly to ground!!!!!!!! I didn't even complain to HK as I don't expect anything from them, I just wrote this revie

This model is absolute crap and I requested that it be withdrawn from sale.There are too many problems to list individually. Save your money and buy something else!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This model is absolute crap and I requested that it be withdrawn from sale.There are too many problems to list individually. Save your money and buy something else!

Monolog Manual Download [2986]
Monolog in the field 1 Download [286]
Monolog in the field 2 Download [391]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save