注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

多星精英2306-2150KV“小怪物”四赛车马达(一套4 CW / CCW)

多星精英2306-2150KV“小怪物”四赛车马达(一套4 CW / CCW)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 76.42
Rating:
Stock:
重量:
364
SKU:
9536000017-0

Price War

产品介绍

不要再为小四电机极致的耐用性和力量。新的多星精英2306 2150KV小怪物在这里

精英2306〜2150kv被戏称为小怪物,在6寸道具和4S(每个)产生推力的近千克。怪物像市场它是围绕4毫米主轴建立在没有其他微型电机......这是正确的4毫米,和大规模11毫米EZO轴承日本!较厚钟增加效率和耐久性。单线缠绕定子可以处理高安培并加热好得多的多股。可更换5毫米道具适配器增加一个硬打崩溃的生存能力。该小怪物与11毫米轴承,厚钟4mm的主轴,单线绕使这个最耐用的MINI四电机周围。

多星精英的电机比采用日本轴承,N45SH磁铁,0.2毫米叠片,180deg无氧铜线最高质量的组件构建,.005g平衡,完善的风放下和100%很奇特的名字和新颜色深绿..更多QC,然后每个电机的设计也评价了它们的类型的应用程序,一切都从它们的安装,以丙型适配器考虑。精英电机是真正的艺术作品

多星精英在质量和价值无可匹敌,而且性能说明了自身。

特征:
•4毫米主轴与轴承11毫米
•EZO轴承日本
•N45SH磁铁
•0.2毫米叠片
•180deg氧自由基单股铜线
•0.005克或者更好的平衡
•完美放下绕组
•100%QC
•更换CW道具适配器

眼镜:
KV(RPM / V):2150
锂聚合物电池:2〜4秒
最大安培:20A
外形尺寸(Dia.xL):23×6毫米
电机轴:4mm(5毫米支撑杆)
螺旋桨轴:5毫米或直接安装与9毫米中心到中心
重量:37.5克
螺栓孔间距:16毫米*19毫米
连接器:2毫米子弹

包括:
4个多星2306 - 2150KV马达和螺旋桨适配器。

Product
Specifications

额外信息

  • 商品编号:
    9536000017-0
  • Brand:
    MultiStar
  • 重量(g)
    364.00
  • 长度
    140.00
  • 宽:
    40.00
  • 高度:
    120.00
  • 千伏(转/ v)的
    2150.00
  • 最大电流( A)
    20.00
  • 功率(W):
  • 长度B (毫米):
    0.00
  • 可以长深(mm )
    0.00
  • 最大电压(V)
    0.00
  • 轴(MM):
    3.00
  • Unit Weight (g):
    37.5
  • 直径C(毫米)
    0.00
  • 总长度E(毫米)
    0.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Got these motors for my latest 250 racer build. They seem nice thus far. One motor was not threaded at the base. I had to tap it. The other 3 were fine. Im using the diatone carbon 250 frame and had to bore out the mounting holes so the shaft clips would clear. Havent tried them on 4s yet but I will. Overall impression is QC was a bit weak on this set but lack of threads on 1 isnt a deal breaker. The thrust G rating is what made me decide on these over the scorpions
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Quality Product, , , Wish it came with one more of each bolt. Or at the least a list of each bolt size so i can reorder after they fall out . Also would like to see soder tabs for the wires. those winding wires are thin and easy to break.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motors with awesome power! Really nice size and plenty of power from a sturdy design. There are two things I'd like to see improvements in, though, the first being the end of the windings which hang down on the underside of the motor: Tuck those in, will you? Secondly, the price is way off. Get real. But overall, awesome power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These motors put a big smile on my face everytime I fly them! I equipped my 2nd RoboCat270 also now with these motors. First runs on 3s, 2nd on 4s. I love these motors, they have the punch you want, they are robust, they dont ask, they simply pull through. There is significantly more power than from any 2204/5. Biggest punch is on 6045 bi-blades with some 5 G's (!) vertical acc of my 735gr Robo on 4s1800! If I had some, they probably would easily drive triblades of the same size also. But not at 20Amps max anymore, hehe. I only have 5045 DAL V2. But, just sweet! Great combo!

These motors run phantastic on 3s with 6045 props. There is absolutely power when you need it. On 4s they become a beast using the same props. Scaling down to 5045 triblades helps taming the power but increase much the "free-fly-effekt" because of their smaller resulting surface compared to the 6ers.

Temperature: even on 4s with 6045 they do not get warm at all, temperature management resp efficiency is obviously very good.

MultiStar, please keep producing these motors!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased 3weeks ago. Missing a prop adaptor, two weeks into the RMA still getting stuffed around, save your money and buy something else !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be careful with the Motor-Mount Screws (big ones on the right Side of the last Picture)!!!!!!

They don't have the same size, 3 out of 8 Screws were longer and because I didn't realize it (mounted 2 Motors before and the Screws for them fitted perfect), I have a broken Motor now...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome motors! I just installed them on my newest quad and have had a blast flying with them. Sturdy construction, eye catching green colour and perfect performance have turned my quad into quite the show stopper! I'll be ordering another set soon.

The only problem I have is that the connectors were listed as 2mm when in reality they are 3.5mm!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
update they found error acknowledged there error and sent engines ..and are great so far only day two but punch is great and just way more than expected on my first 250 build must have for build :) will post pick soon
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
well if I would of got the motors sure I would of wrote a good review since I got a screw driver in a box now have to fight with them to get my engines they say they weigh and barcode it all but no way other wise no way I could of got a screw driver instead of motors no way they weigh the same
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little monsters, put them on my ZMR250, 3s 1500 mw nano lipo, 5 x 4.5 bull nose props. Ultimate blast, i'll be back for more ;-D
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Multistar Elite 'MINI MONSTER' Quad Racing Motor

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。