New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Multiwii和Megapirate AIO飞行控制器瓦特/ FTDI(的ATmega 2560)V2.0

Multiwii和Megapirate AIO飞行控制器瓦特/ FTDI(的ATmega 2560)V2.0

Discontinued Product

Please continue searching for a similar product.
SKU:
387000007
WANT FREE SHIPPING? Click here to find out more!

此款主板拥有多个串行接口,以及一个专用的I2C接口。现在,您可以在GPS直接插,你仍然有其他外部设备额外的端口。除此之外,新的ATmega 2560具有多个IO管脚,因此它可以同时读取从接收器的PWM信号,它有足够的PWM输出来控制胚胎干细胞直接而不需要做PWM信号中的软件。

该控制器甚至有电路板上的microUSB接口正确,无需附加额外的FTDI USB接口。

运动感测侧设有一个新一代的MEMS陀螺仪,通过InvenSense公司一MPU6050,其中有一个单独的芯片上的微机电陀螺/加速度传感器。还有一个3轴磁力计和0.01毫巴的分辨率的晴雨表传感器 - 约10厘米的高度差。

有兴趣的GPS功能?嗯,这是开始的最具成本效益的方式之一 - 只需添加一个10Hz的GPS模块(即将推出),你是好去!



特征:
•支持MegaPirateNG和MultiWii固件
•多达8轴电机的输出
•8个输入通道的标准接收
•4调试/蓝牙模块/ OSD / GPS /遥测串口
•2舵机输出俯仰和横滚平衡环系统
•1伺服输出触发拍照键
•6个模拟输出扩展设备
•对于I2C端口扩展传感器或设备
•独立的3.3V和5V LDO稳压器
•ATMEGA 2560微控制器
•MPU6050 6轴陀螺仪/加速与动作处理单元
•HMC5883L 3轴磁力计的数字
•MS5611-01BA01高精密高度表
•FT232RQ USB-UART芯片和Micro USB插座
•板载逻辑电平转换器



飞行模式Multiwii:
•以下基本模式的一个
- 艾可
- 级
- Alt键保持
- 标题锁

•可选模式
- HeadFree(陶然)
- GPS保持(需要GPS接收器)
- GPS返回首页位置(需要GPS接收器)



飞行模式MegaPirate:
•艾可
•按住Alt键
•游荡(使用GPS)
•引导(使用GPS)
•位置(使用GPS)
•圆(使用GPS)
•RTL(使用GPS)
•自动(使用GPS)
•跟随我(使用GPS)

尺寸:
尺寸:50mmX50mm
身高:11.6毫米
固定孔间距:45毫米
钻孔直径:3毫米
重量:14.2克

包括:
1个AIO PRO FC
3×3Pin的到1Pinx3电缆百毫米
1个3Pin的为3Pin的电缆百毫米
1个Molex公司1.25毫米个4Pin电缆100毫米
1个Molex公司1.25毫米6Pin的电缆百毫米
1个Molex公司1.25毫米8Pin的电缆百毫米

  • SKU 387000007
  • Brand -
  • 容量(mAh) -
  • 重量 45.0000
  • 长度 115.00
  • 25.00
  • 高度 95.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Pretty good, has all the sensors and lots of ports to plug pretty much everything. Not recommend for a small quad, but perfect for 400 experimental multirotors. Had some problems with serial3, when all other ports are busy it drops the speed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty good, has all the sensors and lots of ports to plug pretty much everything. Not recommend for a small quad, but perfect for 400 experimental multirotors. Had some problems with serial3, when all other ports are busy it drops the speed.

Can not believe the sale price!!!! Picked up a few to go with my new colors!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Can not believe the sale price!!!! Picked up a few to go with my new colors!

Great fc for people that want to get into gps and open source fc's. This board is all inclusive at a great price. Will except a wide range of accessories with great community support.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great fc for people that want to get into gps and open source fc's. This board is all inclusive at a great price. Will except a wide range of accessories with great community support.

Very good board with ATmega 2560, full of features and expansion possibilities. Great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good board with ATmega 2560, full of features and expansion possibilities. Great!

Amazing features with so many interfaces. Was able to update firmware using only mission planner only. Had it running Megapirate in under 5 minutes. included cables are also a bonus. Do wish there was more documentation though

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing features with so many interfaces. Was able to update firmware using only mission planner only. Had it running Megapirate in under 5 minutes. included cables are also a bonus. Do wish there was more documentation though

I have bought two of these now and absolutely love them! Both projects were hex copters. Gps is easy to attach, I recommend the NEO-6M GPS Module.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought two of these now and absolutely love them! Both projects were hex copters. Gps is easy to attach, I recommend the NEO-6M GPS Module.

easy to flash with the Megapirate Flash Tool, works great in my Plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

easy to flash with the Megapirate Flash Tool, works great in my Plane

I have this for almost 6 months and still haven't discovered all of the options. So far I've connected: bluetooth (must have), OLED (sold - no use for it), telemetry, GPS, minimOSD. USB port is well soldered - no problem with it.
Very good sensors - compass needs to be far away from ESC, barometer needs thick foam glued on. Default MW PIDs work with most X and frames. AltHold needs tuning, but that's another story.
All in all - great product, worth it's price. APM has nothing on it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this for almost 6 months and still haven't discovered all of the options. So far I've connected: bluetooth (must have), OLED (sold - no use for it), telemetry, GPS, minimOSD. USB port is well soldered - no problem with it.
Very good sensors - compass needs to be far away from ESC, barometer needs thick foam glued on. Default MW PIDs work with most X and frames. AltHold needs tuning, but that's another story.
All in all - great product, worth it's price. APM has nothing on it.

Excellent quality and price, full of features and expansion possibilities.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent quality and price, full of features and expansion possibilities.

Very impressed by this board! I flashed it with MegapirateNG, connected a GPS receiver (uBlox Neo 6) and a Bluetooth module.

Flying goes very well! Also altitude hold & loiter are handled perfectly by this board. I recommend buying the Bluetooth module as it makes configuring a lot easier, with e.g. an Android phone or tablet.

If you're a beginner: this might be a bit too difficult to start with. Maybe the KK2.1.5 is a better choice in that case.
If you are experienced and you want to move on: this is definitely the board for you. Be aware that you need a bit of computer skills (compiling the Arduino code), but when you have everything up and running, this is an amazing piece of hardware!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very impressed by this board! I flashed it with MegapirateNG, connected a GPS receiver (uBlox Neo 6) and a Bluetooth module.

Flying goes very well! Also altitude hold & loiter are handled perfectly by this board. I recommend buying the Bluetooth module as it makes configuring a lot easier, with e.g. an Android phone or tablet.

If you're a beginner: this might be a bit too difficult to start with. Maybe the KK2.1.5 is a better choice in that case.
If you are experienced and you want to move on: this is definitely the board for you. Be aware that you need a bit of computer skills (compiling the Arduino code), but when you have everything up and running, this is an amazing piece of hardware!!!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Conecting external devices Download [300]
Manual - Multiwii and Megapirate AIO FC Download [436]
MPNG documentation Download [40]
MegapirateNG 3.0.1-R3 Anleitung Deutsch Download [345]
PID settings H550 V2 Glass Fiber Hexcop Download [129]
Crius Download [395]
Multiwii Download [436]
Code Download [14]
step by step Multiwii and MegaPirate(bla Download [949]
micro quad 140mm+AIO fc Download [1276]
  1. 1
  2. 2
  3. 3

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save