New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Multiwii OLED显示模块128×64 I2C点(MWC)

Multiwii OLED显示模块128×64 I2C点(MWC)

Discontinued Product

Please continue searching for a similar product.
SKU:
387000035-0
WANT FREE SHIPPING? Click here to find out more!

在MWC OLED用于与I2C中,所有MultiWii FC的遥测和调试,并在阳光直射的高对比度和高亮度屏幕观看的数据是没有问题的。

只是一些OLED上可见的功能是:状态显示,MWC固件版本,飞机模式,开锁状态,远程输入信号值,该FC输出信号值,陀螺仪和加速状态,信号周期/ I2C误差,电压和电流(如果你的MWC具有电压和电流传感器)。在编程模式下可以显示并协助设置参数,A​​UX切换功能设置,PID参数调整,加速柔软度/曲线调整,你甚至可以制作和显示您自己的标志,这样的例子不胜枚举。

特征:
•高亮度,自发光,高对比度
•单色128×64点阵
•3.3V〜5V I2C接口
•用于遥测和调试MultiWii FC。

眼镜:
尺寸:30mmX26mm
身高:7.0毫米
重量:3.7g /6.9克(包括电缆)

包括:
HO-01的OLED显示模块×1
大4Pin电缆150毫米X1

  • SKU 387000035-0
  • Brand -
  • 容量(mAh) -
  • 重量 18.0000
  • 长度 55.00
  • 10.00
  • 高度 40.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !

RC Download [47]
Solder 2 pins to enable arduino ! Download [445]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save