注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

NTM螺旋桨驱动28-26 1000KV / 235W

NTM螺旋桨驱动28-26 1000KV / 235W

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
68
SKU:
NTM2826-1000

acc
产品介绍

NTM螺旋桨驱动电机是坚如磐石的性能外转子 s的紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的赛道测试。
因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。

我们的质检工程师检查并运送到仓库HobbyKing.com前平衡每个电机。

眼镜:
型号:NTM螺旋桨驱动器系列2826 1000 千伏
KV:1000RPM / V
波兰人:3
电机风:19T
最大电流:15A
最大功率:176W @ 11.1V(3S)/ 235W @ 15V(4S)
:3毫米
重量:54克
ESC:20〜30A
细胞计数:3秒〜4秒Lipoly
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
连接方式:3.5毫米子弹 -连接器

道具的测试数据:
9x4.7 - 11.1V / 113W / 10.2A /0.632千克推力
9x6 - 14.8V / 220W / 14.9A /0.937千克推力

注:附件包可用于此电机。请参阅下面的相关项目。

Product
Specifications

额外信息

  • 商品编号:
    NTM2826-1000
  • Brand:
  • 重量(g)
    68.00
  • 长度
    100.00
  • 宽:
    40.00
  • 高度:
    65.00
  • 千伏(转/ v)的
    1000.00
  • 最大电流( A)
    15.00
  • 功率(W):
    235.00
  • 长度B (毫米):
    28.00
  • 可以长深(mm )
    14.00
  • 最大电压(V)
    15.00
  • 轴(MM):
    3.00
  • Unit Weight (g):
    54
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    41.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good little outrunner, I have noticed that there does appear to be slight bearing movement but doesn't affect operation. Nice quiet little unit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really little motor, smaller than the images seem to be.

Make attention to the fact the rotor is 'inversed' I will post some video about it.

it seems to be a really nice power/weight ratio.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These motors are rock steady for the price. I have them on a 650mm quad and they do a great job. Running them with 20a esc's and have had no problems. Don't forget to get the prop adapters.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the real problem of this motor is the BEARINGS.
my advice is not to buy.
I bought this because i'm a beginner
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good motor just dont expect to break any speed records very good for a trainer plane such as the bixlers
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed these on my Q450 (upgraded from 2210n) and they made a huge difference. Same KV rating, but loads more power!
Nicely balanced and reasonably quiet, I flew around for 30 mins or so, getting through 2 LiPo's while fighting the breeze and the motors (and batteries) stayed nice and cool.

Definitely worth the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice littel slow flyer motor. dynamically balanced but came with defective rear ball bearing. runs almost vibrationless after ball bearing was replaced. grub screw at the rear end was secured using some red colored screwlock. needed to wipe off the excess that did not cure.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bad bearing...bought 6 of them..2 craps because of bad bearing..dont really recommend this motor unless you want to change the bearing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
moteur de qualit pour le prix
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have recently bought 5 of these motors for a quad copter. 4 for the quad and 1 extra based on reviews. One of these motors was bad from the factory and would barely turn when put on the quad. Thankfully HK made it good and gave me credit. The first time I flew the quad on about the third flight 3 of the 4 motors broke, each loosing the circlip and the shaft either coming part or all the way out of the motor. Please don't waste your money on these motors for you quad they are horrible and will not hold up.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HK X900 Tricopter with NTM Prop Drive 28-26 1000KV motors

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。