New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

NTM螺旋桨驱动28-36 1000KV / 400W无刷电机

NTM螺旋桨驱动28-36 1000KV / 400W无刷电机

Discontinued Product

Please continue searching for a similar product.
SKU:
NTM2836-1000
WANT FREE SHIPPING? Click here to find out more!

NTM螺旋桨驱动电机是坚如磐石的性能outrunners紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的赛道测试。
因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。

我们的质检工程师检查并运送到仓库HobbyKing.com前平衡每个电机。

眼镜:
型号:NTM螺旋桨驱动器系列2836 1000KV
KV:1000RPM / V
波兰人:3
电机风:14T
最大电流:30A
最大功率:400W
转轴端:4mm
重量:89克
ESC:30〜40A
细胞计数:3秒〜4秒Lipoly
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
连接方式:3.5毫米子弹连接器

道具的测试数据:
11x7E - 11.1V / 220W / 20A /976克推力
11x7E - 14.8V / 412W / 27.7A /1.485千克推力
12x6E - 11.1V / 215W / 20A /1.08千克推力
12x6E - 14.8V / 430W / 29A /1.42千克推力
13x4E - 11.1V / 223W / 20A /1.06千克推力
13x4E - 14.8V / 400W / 27A /1.48千克推力

注:附件包可用于此电机。请参阅下面的相关项目。

  • SKU NTM2836-1000
  • Brand NTM
  • 重量 110.0000
  • 长度 90.00
  • Packaging Width 50.00
  • 高度 50.00
  • 千伏(转/ v)的 1000.00
  • 最大电流( A) 30.00
  • 电阻( MH) 0.00
  • 最大电压(V) 15.00
  • 功率(W) 400.00
  • 轴(MM) 4.00
  • 长度B (毫米) 36.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 25.00
  • 总长度E(毫米) 56.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I do NOT suggest this motor for a fixed wing plane!!!
The 3 pole configuration make it accelerate very very very slowly, initially I thought that the esc is faulty... also try to change timing since the auto does not work very well in some controllers (2-3Amps more). Keep in mind that "big" size props are needed in order to give sufficient thrust or airspeed (other 1000kV motor need significantly smaller props). Fitting a "huge" 11/7 or 12/6 is the way to go on 3s, but you only get 14-15A.
Disappointing performance on a Hobbyking /Hyperion ENIGMA the plane was flyable but did not have the speed/power for maneuvers, or to handle windy conditions.
On the other hand built quality is good, total weight including prop and base mount is 101gr
Maybe in a multirotor this motor will give better results...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I do NOT suggest this motor for a fixed wing plane!!!
The 3 pole configuration make it accelerate very very very slowly, initially I thought that the esc is faulty... also try to change timing since the auto does not work very well in some controllers (2-3Amps more). Keep in mind that "big" size props are needed in order to give sufficient thrust or airspeed (other 1000kV motor need significantly smaller props). Fitting a "huge" 11/7 or 12/6 is the way to go on 3s, but you only get 14-15A.
Disappointing performance on a Hobbyking /Hyperion ENIGMA the plane was flyable but did not have the speed/power for maneuvers, or to handle windy conditions.
On the other hand built quality is good, total weight including prop and base mount is 101gr
Maybe in a multirotor this motor will give better results...

I'm using this one for my Dragonfly 1800 with stock propeller, works great and power is plenty with 3S.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using this one for my Dragonfly 1800 with stock propeller, works great and power is plenty with 3S.

I to have used this motor with a Phoenix 2000 glider 225 watts using a 10/6 prop motor does get warm but really pulls the glider around so I going use sub-trim to cut the throttle back a tad to under 200 watts using my watt meter.Very happy with this motor worked out of the box.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I to have used this motor with a Phoenix 2000 glider 225 watts using a 10/6 prop motor does get warm but really pulls the glider around so I going use sub-trim to cut the throttle back a tad to under 200 watts using my watt meter.Very happy with this motor worked out of the box.

No way to attach propeller, completely useless!

Looks like a prop hub could be bolted on, shame it wasn't included with the motor. Swapped shaft around, no good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No way to attach propeller, completely useless!

Looks like a prop hub could be bolted on, shame it wasn't included with the motor. Swapped shaft around, no good.

purchased two of these first one on test bed with 11x7 prop would not go above 1/3 revs before shutting down. tested speed controller on another motor works fine. will spin up a smaller ie 9x5 no problem. Second motor was tested in the same way a about 1/3 revs the whole motor shot apart breaking the shaft. Either the clip on the back came off or it was missing in the first place fitted new shaft it will run but very rough indicating to me it shot a bearing coming apart. In the throws of sending them back or throwing them in the bin and consider lesson learnt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

purchased two of these first one on test bed with 11x7 prop would not go above 1/3 revs before shutting down. tested speed controller on another motor works fine. will spin up a smaller ie 9x5 no problem. Second motor was tested in the same way a about 1/3 revs the whole motor shot apart breaking the shaft. Either the clip on the back came off or it was missing in the first place fitted new shaft it will run but very rough indicating to me it shot a bearing coming apart. In the throws of sending them back or throwing them in the bin and consider lesson learnt.

Motor ist ein Hitzkopf, Leistung wird in Wrme umgewandelt, nach 5 Flge bereits eine schwarze Wicklung und Temperaturen die den Magneten schadet. Keine Kaufempfehlung

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor ist ein Hitzkopf, Leistung wird in Wrme umgewandelt, nach 5 Flge bereits eine schwarze Wicklung und Temperaturen die den Magneten schadet. Keine Kaufempfehlung

Profitant d'une offre promotionnelle de Hobby King, j'ai achet? ce moteur de tr?s bonne qualit? au prix imbattable de 7?30 soit ? 50pcnt de son prix de vente normal.

Il est pr?vu d'?tre mont? sur un Fun-Fly de 1m20 est d'un poids de 1.2Kg, au vu des essais de traction fourni dans les commentaires sur le moteur cela devrai me donner un bon rapport poids/puissance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Profitant d'une offre promotionnelle de Hobby King, j'ai achet? ce moteur de tr?s bonne qualit? au prix imbattable de 7?30 soit ? 50pcnt de son prix de vente normal.

Il est pr?vu d'?tre mont? sur un Fun-Fly de 1m20 est d'un poids de 1.2Kg, au vu des essais de traction fourni dans les commentaires sur le moteur cela devrai me donner un bon rapport poids/puissance

Purchased two of these motors, the 1000kv and a 1400kv for a 2 meter glider. The ratings are a bit overstated, try it and find out the hard way. Hot motors melting insulation, etc. But my biggest gripe is the bearings and end float. The 1000kv on test sheared it's shaft due to vibration at half throttle the prop narrowingly missing my face. Replaced the motor with 1400kv version. Vibration again. Changed folding prop set up to verify what was causing the problem. Definitely the motor. No impressed and wasting my time. Have since purchased Turnigy 28mm XP series. Hopefully these will perform.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased two of these motors, the 1000kv and a 1400kv for a 2 meter glider. The ratings are a bit overstated, try it and find out the hard way. Hot motors melting insulation, etc. But my biggest gripe is the bearings and end float. The 1000kv on test sheared it's shaft due to vibration at half throttle the prop narrowingly missing my face. Replaced the motor with 1400kv version. Vibration again. Changed folding prop set up to verify what was causing the problem. Definitely the motor. No impressed and wasting my time. Have since purchased Turnigy 28mm XP series. Hopefully these will perform.

A really good motor. There aren't any problems. Still use it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A really good motor. There aren't any problems. Still use it.

Bought this for my Phoenix 2000 glider. Using the stock 10x6 prop, blueseries 30A ESC and 1500 3S battery I got the following results;

22 Amps

11.4 Volts

250 Watts

A bit high on the amps and the motor does get quite hot but it performs well and propels the glider with ease.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this for my Phoenix 2000 glider. Using the stock 10x6 prop, blueseries 30A ESC and 1500 3S battery I got the following results;

22 Amps

11.4 Volts

250 Watts

A bit high on the amps and the motor does get quite hot but it performs well and propels the glider with ease.

  1. 1
  2. 2
  3. 3
No File Name Download [2139]
No File Name Download [293]
NTM Prop Drive Series 2836 Download [195]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking