注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

NTM螺旋桨驱动28-36 1200KV / 530W

NTM螺旋桨驱动28-36 1200KV / 530W

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
98
SKU:
NTM2836-1200

acc
产品介绍

NTM螺旋桨驱动电机是坚如磐石的性能outrunners紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的赛道测试。
因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。
我们的质检工程师检查并运送到仓库HobbyKing.com前平衡每个电机。

规格。
型号:NTM螺旋桨驱动器系列2836 1200kv
KV:1200RPM / V
波兰人:6
电机风:12T
最大电流:36A
最大功率:295W @ 11.1V(3S)/ 530W @ 15V(4S)
重量:85克
ESC:30〜40A
细胞计数:3秒〜4秒Lipoly
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
连接方式:3.5毫米子弹连接器

道具的测试数据:
10x5 - 11.1V / 195W / 17.6A /1.02千克推力
10x5 - 14.8V / 430W / 29A /1.5千克推力
11x7 - 11.1V / 295W / 26.5A /1.12千克推力
11x7 - 14.8V / 530W / 36A /1.48千克推力


注:附件包可用于此电机。请参阅下面的相关项目。

Product
Specifications

额外信息

  • 商品编号:
    NTM2836-1200
  • Brand:
  • 重量(g)
    98.00
  • 长度
    75.00
  • 宽:
    35.00
  • 高度:
    50.00
  • 千伏(转/ v)的
    1200.00
  • 最大电流( A)
    36.00
  • 功率(W):
    530.00
  • 长度B (毫米):
    38.00
  • 可以长深(mm )
    25.00
  • 最大电压(V)
    15.00
  • 轴(MM):
    4.00
  • Unit Weight (g):
    85
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    56.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I'm not impressed.
First of all motor comes with no accessory pack,
Second, Bearings are rubbish!
One of the bearings is 5x7x2.5 (unobtainable it would seem).
It seems the only way I can use this motor is to also buy a 4mm shaft, new bearings and an accessory pack on top of the motor purchase. Add to that shipping on a second order, and It's becoming a rather expensive motor...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's my second motor of this kind, the first one lived less than 10min until it was burned through, complete loss ... The second lost the motor shaft on the 2. flight.
Have to get a new shaft and fixate it properly.

The Quality of the motor is hardly 2 Crowns, rather 1 Crown

With Shipping costs I have invested 40 already, if the 2. Motor isn't repairable I have invested 60, for 60 I could have bought a motor of real quality.
RMA is still pending for the first motor, after 3 Weeks!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be sure to pick up a 28mm accessory pack with this motor, PRODUCT ID: NTM28-ACC, motor does not include it. Great motors, I've run them in the 36mm version and multiple 28mm versions.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very powerful and nice to use can vertical lift my plane just dont forget the accessorie pack like i did
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor for the Quad Q450 V3.

A lot of power with 3s and SF 10x4,5 Prop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have built it in my VMAR Piper L4 GRasshopper with an 30A ESC plus 10x6 Master Airscrew plus 3S 2200mAh the weight of the plane was about 900g. This Setup was enought to do Knife Edge, Turns and Loops. Enough Power to tow an 1kg Sailplane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good motor. This motor shown good performance.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was totally impressed with every aspect of this motor, great job guys keep up the excellent work. FYI I am running them on my Turnigy Hexacopter Build.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I like the black color and the body prop adapter method. It has undersized bearings, need to replace them often. With Gemfan 9x5 prop for my Q450 frame, 4S(14.27V), pulls 1750gram at 34.5A (496W) and gets hot in seconds. At half throttle, 4S(15.31V) pulls 1050grams at 13.44A(201W) and still gets hot. Massive static cog ensures high vibration experience and powerful noise. It appears that the Turnigy XP series have better quality, although they don't look so cool.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
super moteur encore tres bon rendement pour mon mx2 3d de hk
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。