New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

NTM螺旋桨驱动器系列28-30A 750KV /140瓦特

NTM螺旋桨驱动器系列28-30A 750KV /140瓦特

Discontinued Product

Please continue searching for a similar product.
SKU:
NTM2830-750
WANT FREE SHIPPING? Click here to find out more!

NTM螺旋桨驱动电机是坚如磐石的性能外转子 s的紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的赛道测试。

因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。
完美千伏和大小四轴飞行器!

我们的质检工程师检查并运送到仓库HobbyKing.com前平衡每个电机。

眼镜:
型号:NTM螺旋桨驱动器系列28-30A 750KV
KV:750rpm震/ V
最大电流:20A
最大功率:120W @ 12V(3S)/ 140W @ 15V(4S)
:3毫米
重量:67.1克
ESC:25A
细胞计数:3秒〜4秒Lipoly
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
连接方式:3.5毫米子弹连接器
建议道具: 道具测试数据即将推出!

注:
附件包可用于此电机。请参阅下面的相关项目。

  • SKU NTM2830-750
  • Brand -
  • 重量 80.0000
  • 长度 100.00
  • 40.00
  • 高度 70.00
  • 千伏(转/ v)的 750.00
  • 最大电流( A) 20.00
  • 电阻( MH) 0.00
  • 最大电压(V) 15.00
  • 功率(W) 140.00
  • 轴(MM) 3.00
  • 长度B (毫米) 32.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 19.00
  • 总长度E(毫米) 45.00
  • NTM Prop Drive Series 28-30A 750kv / 140w

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

sin duda los mejores simpre moton todos mis drones con este motor 0 fallos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

sin duda los mejores simpre moton todos mis drones con este motor 0 fallos

Excellent price-quality

very good!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent price-quality

very good!

on 4s with 12x6 3blade props pushing 1.26kg thrust each

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

on 4s with 12x6 3blade props pushing 1.26kg thrust each

Brand new out of the box and seriously out of round. Not even flyable. This would shake the copter so bad the flight controller wouldn't work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brand new out of the box and seriously out of round. Not even flyable. This would shake the copter so bad the flight controller wouldn't work.

3 of these are running my tricopter swinging 10x4.7 props on Blue series ESCs flashed with SimonK. Great motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

3 of these are running my tricopter swinging 10x4.7 props on Blue series ESCs flashed with SimonK. Great motors.

its for my tricopter...really smooth and nice motor...arrived within more than two weeks and fast shipping

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

its for my tricopter...really smooth and nice motor...arrived within more than two weeks and fast shipping

Terrible motors for using on quads have used twice outside after performing half dozen indoor test flights on the second outdoor flight motor failed and destroyed my quad. On inspection the top bearings on all motors where destroyed and one had lost a C clip. The top bearing is not suitable for the job as it is smaller than the bottom yet taking more load. Removed the bearings from motors and cut open the insides were not pretty. Deciding wether to upgrade them to ceramic bearings but in all honesty i think these motors should be kept to planes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Terrible motors for using on quads have used twice outside after performing half dozen indoor test flights on the second outdoor flight motor failed and destroyed my quad. On inspection the top bearings on all motors where destroyed and one had lost a C clip. The top bearing is not suitable for the job as it is smaller than the bottom yet taking more load. Removed the bearings from motors and cut open the insides were not pretty. Deciding wether to upgrade them to ceramic bearings but in all honesty i think these motors should be kept to planes

Put these on my first quad. You need to check the small grub screw that locks the shaft into place. Mine fell from the sky when the motor body complete with prop separated. On closer inspection the tiny grub screw that hold the shaft in place had been put in cross threaded and was holding just enough to let it fly, it then let go sending a prop and case off and the quad down. No great damage but based on the description should have been picked up on the QC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put these on my first quad. You need to check the small grub screw that locks the shaft into place. Mine fell from the sky when the motor body complete with prop separated. On closer inspection the tiny grub screw that hold the shaft in place had been put in cross threaded and was holding just enough to let it fly, it then let go sending a prop and case off and the quad down. No great damage but based on the description should have been picked up on the QC.

very good motor for the money

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good motor for the money

Several tests propeller:

Test 1

Batterie: 4s

Prop:10x4,5

Current:7A

Power:110W

Trust:1500g

Test2

Batterie:3s

Prop:10x4,5

Current:7,25A

Power:71W

thrust:1200g

I hope that this review has helped some

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Several tests propeller:

Test 1

Batterie: 4s

Prop:10x4,5

Current:7A

Power:110W

Trust:1500g

Test2

Batterie:3s

Prop:10x4,5

Current:7,25A

Power:71W

thrust:1200g

I hope that this review has helped some

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
2830 750 KV PROP TEST DR111TR Download [342]
ntm 2830 750kv prop test Download [342]
balanced bell Download [1911]
ecalc Download [122]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save