注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

NTM螺旋桨驱动器系列35-36A 1800Kv /875瓦特

NTM螺旋桨驱动器系列35-36A 1800Kv /875瓦特

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
147
SKU:
NTM3536A-1800

acc
产品介绍
NTM螺旋桨驱动电机是坚如磐石的性能outrunners紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的赛道测试。

因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。


我们的质检工程师检查并运送到仓库HobbyKing.com前平衡每个电机。

眼镜:
型号:NTM螺旋桨驱动35-36A 1800
KV:1800RPM / V
最大电流:65A
最大功率:700W @ 12V(3S)/ 875瓦@ 15V(4S)
转轴端:4mm
重量:120g
ESC:70A
细胞计数:3秒〜4秒Lipoly
螺栓孔:18.9毫米&25毫米
螺栓螺纹:M3
连接方式:3.5毫米子弹连接器
建议道具: 道具测试数据即将推出!
 
一个伟大的飞机发动机达到0.30大小。
Product
Specifications

额外信息

  • 商品编号:
    NTM3536A-1800
  • Brand:
  • 重量(g)
    147.00
  • 长度
    100.00
  • 宽:
    40.00
  • 高度:
    70.00
  • 千伏(转/ v)的
    1800.00
  • Unit Weight (g)
    117
  • 最大电流( A):
    65.00
  • 电阻( MH):
    0.00
  • 最大电压(V)
    15.00
  • 功率(W)
    720.00
  • 轴(MM):
    4.00
  • 长度B (毫米):
    38.00
  • 直径C(毫米)
    35.00
  • 可以长深(mm )
    23.00
  • 总长度E(毫米):
    58.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Einfach Super!! Ich habe ihn in meinem EFX Racer mit Zippy compact 35 c 80 Amper YGE Regler und einer Klapluftschraube 8x7 Aeronaut mit Simprop Mitnehmer er zieht 80 Ampere dauer was die Akkus zwar sehr mitnimmt aber er geht wie Schmids Katze. Steigleistung 36 M/sec.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall

stsguy 27 points - 18/01/2016


SOMETIMES hk GETS IT RIGHT AND WITH THIS MOTOR THEY DID! I bought this motor awhile back and installed it a wing. a small wing of 36 inch wspan and it was a hand full. I was looking for disaster and.... found it. So I installed it on a smaller wing with a list of different size props. 8x6 thru to a 11x6 the 10x10 worked well as any but the 9x6 was ok too. ive been flying planes at 1 to 1.5 lbs and it is scary to say the least. Im adding one to my lateset build and will get back with the stats Its a 64 inch wing at 3.5 lbs
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great bang for the buck! Bought this for my EFX Racer kit. Built a previous kit with the 28mm motor and it was awesome. Cant wait to get this new one crammed in!! For the affordable price these motors are a great option!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Haven't flown on this yet - only bench tested. But this one is a beast. Lighter than my E-flite 1250 Kv Power 25 but with more power. I run 8x8 on 4s on the E-flite for 53A. This one went 89 A on a 8x6. I know it is 1800 Kv but still, wow! Will be trying a 6" prop some time. 6 or less in pitch. Will post results on the Discussion tab here or the International Warehouse Discussion tab. Make sure you buy the Accessory pack (as many other good people here have posted). Comes with bullets soldered unlike the G25 I had. Thanks, HK. :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very strong motor, i used it in the durafly efx racer with a 7x8 apc prop.

Very fast! Look for good cooling and a strong speedcontroller (80A or more).

Current will be 100A at full throttle, so look at your fligthtime, not more than 10 seconds full throttle, then slower to cool up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cumple con su funcin, es recomendable comprar otro eje por si acaso. No vale como motor pusher salvo si se cambia de lado el eje.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
moteuur peu fiable 3 vols brulee
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent - Using it in a MPX Blizzard
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Replaced 800kv stock motor with this, and my 40 wingspan Zero screams!! Using 8x6 master airscrew 2 blade.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this NTM to replace the motor in my Dynam P-51. I'm running an 9x6 with a 60A HK ESC pushed by a 4S 2600 MAH LiPo. This plane MOVES! It gets warm when flying at WOT, but nothing that would do any damage. This motor is a power house. I've got nothing but good things to say about it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Drive Series 35-36A 1800Kv / 875w

  • Bench Test - NTM 3536 1800kv

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。