New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

NTM螺旋桨驱动器系列35-36A 910Kv / 350W

NTM螺旋桨驱动器系列35-36A 910Kv / 350W

Discontinued Product

Please continue searching for a similar product.
重量:
147
SKU:
NTM3536A-910
WANT FREE SHIPPING? Click here to find out more!
NTM螺旋桨驱动电机是坚如磐石的性能outrunners紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环,工具钢轴再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的测功机测试。

因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。
我们的质检工程师制衡运送到仓库HobbyKing.com之前,每个电机。

型号:NTM螺旋桨驱动35-36A 910
KV:910rpm / V
打开:10T
最大电流:38A
额定功率:350瓦特
转轴端:4mm
重量:117克
螺栓孔:18.9毫米&25毫米
螺栓螺纹:M3
ESC:30A
细胞计数:3S Lipoly
建议道具:10x4
效率:83%
一个伟大的飞机发动机达到0.30大小。
  • SKU NTM3536A-910
  • Brand -
  • 重量(g) 147.00
  • 长度 100.00
  • 40.00
  • 高度 70.00
  • 千伏(转/ v)的 910.00
  • 最大电流( A) 35.00
  • 电阻( MH) 0.00
  • 最大电压(V) 11.00
  • 功率(W) 350.00
  • 轴(MM) 4.00
  • 长度B (毫米) 38.00
  • 直径C(毫米) 35.00
  • 可以长深(mm ) 23.00
  • 总长度E(毫米) 58.00
  • NTM Prop Drive Series 35-36A 910Kv / 350W

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought to power my Phoenix 2000 after the NTM 28-36 1000kv i had before burned, and also destroyed my ESC.
What a difference : far lower consummation and barely warm even after lot of solicitation, could be perfect choice if only it was lighter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought to power my Phoenix 2000 after the NTM 28-36 1000kv i had before burned, and also destroyed my ESC.
What a difference : far lower consummation and barely warm even after lot of solicitation, could be perfect choice if only it was lighter.

Great motor, got it for my Skywalker1900, powers it very well, very well made, i have 3 NTM motors and cannot fault them. amazing value for money as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, got it for my Skywalker1900, powers it very well, very well made, i have 3 NTM motors and cannot fault them. amazing value for money as well.

Very powerful on 3 or 4 cells. With a 10-6 APC but poor balance with no prop. I checked the prop hub for out of round and it seems fairly true. I see no indication that any balancing was done as you usually see some blue stuff inside the motor on the Turnigy line. FYI, I got a max 1800 gm thrust at 25 amp on 4 cells and 1300 at 18 amps in 3 cells. This was crude test with the motor taped to a digital scale and a pusher configuration. I don't understand why they make these things with the shaft out the back. Seems like it was meant for something else. Mine came in a plastic bag with no box or label. Same for the prop mount. Next time I need a cheap motor, I'll go with the Turnigy stuff as I think they are balanced better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerful on 3 or 4 cells. With a 10-6 APC but poor balance with no prop. I checked the prop hub for out of round and it seems fairly true. I see no indication that any balancing was done as you usually see some blue stuff inside the motor on the Turnigy line. FYI, I got a max 1800 gm thrust at 25 amp on 4 cells and 1300 at 18 amps in 3 cells. This was crude test with the motor taped to a digital scale and a pusher configuration. I don't understand why they make these things with the shaft out the back. Seems like it was meant for something else. Mine came in a plastic bag with no box or label. Same for the prop mount. Next time I need a cheap motor, I'll go with the Turnigy stuff as I think they are balanced better.

Sehr gute Verarbeitung,

ist voll und ganz zu empfehlen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr gute Verarbeitung,

ist voll und ganz zu empfehlen.

great little motor running a 13x4 prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great little motor running a 13x4 prop

beautiful motor, solid to hold, built good, runs perfect low noise,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

beautiful motor, solid to hold, built good, runs perfect low noise,

I bought this for an f550, im using 30 amp afro esc, naza v2, and slow fly Carbon mixed 10x4.5 props, with a 5200 4s multistar lipo, it can handle 10 minutes of mixed flying, and about 8 with a gopro and tarot gimbal, motors and esc cold on landing, i'm not sure if stock dji motors come down as cool as this do, i went ahead and put a larger gimbal and a black magic pocket, it handled 5 minutes "on a 5000 20c 4s zippy (flying 2 minutes with the multistar lipo was just insane, as the battery came down boiling)" amazing considering its overall 4 kg weigh.

I'd have to say it is great, except for a Very big issue which is, e-rings tend to loosen the shaft, luckily it hasn't made a mess, but you can see like 5mm of the bell coming out, so watch out

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this for an f550, im using 30 amp afro esc, naza v2, and slow fly Carbon mixed 10x4.5 props, with a 5200 4s multistar lipo, it can handle 10 minutes of mixed flying, and about 8 with a gopro and tarot gimbal, motors and esc cold on landing, i'm not sure if stock dji motors come down as cool as this do, i went ahead and put a larger gimbal and a black magic pocket, it handled 5 minutes "on a 5000 20c 4s zippy (flying 2 minutes with the multistar lipo was just insane, as the battery came down boiling)" amazing considering its overall 4 kg weigh.

I'd have to say it is great, except for a Very big issue which is, e-rings tend to loosen the shaft, luckily it hasn't made a mess, but you can see like 5mm of the bell coming out, so watch out

Fine motor but the motor shaft is too small. Engine bearings are good but the shaft is loose in the bearings. Assembled new axle from Dualsky and it fit perfectly in the bearings. Now the engine is good and goes silent._____Fin motor men motoraxeln r fr liten, ls inne i lagret. Provade en axel frn Dyalsky motorn och den passade perfekt i lagrena p NTM motorn. Monterade i axeln och nu gr motorn tyst.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fine motor but the motor shaft is too small. Engine bearings are good but the shaft is loose in the bearings. Assembled new axle from Dualsky and it fit perfectly in the bearings. Now the engine is good and goes silent._____Fin motor men motoraxeln r fr liten, ls inne i lagret. Provade en axel frn Dyalsky motorn och den passade perfekt i lagrena p NTM motorn. Monterade i axeln och nu gr motorn tyst.

A good motor, but beware that the mount and prop adapter are not included. Really wish they were.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A good motor, but beware that the mount and prop adapter are not included. Really wish they were.

Mit einem 10x4 Prop. messe ich bei 10,4 V Netzteil entspricht etwa 3S Lipo mit dem HK010 Power Analyser 14,8 A bei 8200 U/min. was 148 Wh ergibt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mit einem 10x4 Prop. messe ich bei 10,4 V Netzteil entspricht etwa 3S Lipo mit dem HK010 Power Analyser 14,8 A bei 8200 U/min. was 148 Wh ergibt.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Dyno Chart Download [96]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save