注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

NTM转子驱动450系列1700KV / 930W

NTM转子驱动450系列1700KV / 930W

QTY:

Now save 保存 AU$ 13.07 AU$ 13.07

Special Price AU$ 10.81 AU$ 10.81

You save 保存 AU$ 13.07 AU$ 13.07

Was  AU$ 23.88

Rating:
Stock:
重量:
121
SKU:
9171000065

Price War

产品介绍

NTM转子驱动,我们的最新除了NTM性能的外转子电机系列是高品质无刷外转子电机专为当今高性能电动模型直升机使用而设计的。该转子NTM驱动电机具有高品质,高精度使日本滚珠轴承确保您的高需求的R / C直升机长寿命和优异的性能。它们还具有在轴上齿轮mounitng平坦的地方。

*该电机为动力6S系统的理想选择在450级直升机!

我们今天的表现在市场上测试对其他流行的直升机电机这些电机如对齐450MX马达。在我们的测试NTM转子驱动电机不仅提供了更好的效率,而且还高得多的电流处理(在20%以上)。

NTM转子驱动电机是坚如磐石的性能outrunners紧绕组,优质轴承,正确的额定磁铁,平衡定子和通量环再加上他们是QC检查下午14点,从材料加工一路过关斩将到最后的赛道测试。

因为我们设计并完全建立这些电机内部(从3D / 2D绘图到材料采购,加工,动平衡,总装和测功机),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。的中间人的取消意味着我们可以更好地驱动价值的市场,并在工厂(我们)的零售价格,这些马达!所有表现数据是真实的,在我们自己的电机dynos测试。

我们的质检工程师检查并运送到仓库HobbyKing.com前平衡每个电机。

眼镜:
型号:NTM转子变频器系列2938 1700kv
KV:1700RPM / V
波兰人:3
最大连拍。电流:30A
突发电流(5秒):42A
最大功率:930W @ 22.2V
:3.5毫米
重量:96克
细胞计数:6S Lipoly
螺栓孔:16毫米x 16毫米
螺栓螺纹:M2
连接方式:3.5毫米子弹连接器

Product
Specifications

额外信息

  • 商品编号:
    9171000065
  • Brand:
    N/A
  • 重量(g)
    121.00
  • 长度
    70.00
  • 宽:
    40.00
  • 高度:
    60.00
  • 千伏(转/ v)的
    1700.00
  • 最大电流( A)
    42.00
  • 功率(W):
    930.00
  • 长度B (毫米):
    38.00
  • 可以长深(mm )
    25.00
  • 最大电压(V)
    22.00
  • 轴(MM):
    3.50
  • Unit Weight (g):
    96
  • 直径C(毫米)
    29.00
  • 总长度E(毫米)
    53.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I'm personally very happy with this engine in my 450 size helicopters with 6s setup. I run one in a 450 TT PRO FBL with turnigy nano tech 6s 1300 mah batteries and get flight times of 8 to over 10 minutes (depending on blades). Out of three ordered motors on one of them a magnet failed (parts broke of while running).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor for the price. I'm using it in my Gaui X3, and it doesn't run any worse than when I first installed it. It does run a bit hot, especially in the 25C temps in the summer. This means a cool down session is required before the next pack is flown, but on cooler days, like spring and fall, back to back flying is not an issue. This is due to my setup, and I could easily lower the gearing and the headspeed to get it cooler, but other motors running a similar setup do not get as hot. I haven't noticed any issues from the heat though...just gotta make sure I give it a rest for a minute or two. You will not have any issues with this motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ive used this motor for 12 flights so far, im very impressed with its performance, its a really good deal quality/price, im using it in my trex 450 dfc pro for 3d.
thanks hobbyking
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor was my introductioin to 6s 450 helis, and it delivers quite a punch! the shaft got bent a bit after a small crash, so keep an eye on that!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have to add this new review for the second motor i have bought, it is OK, no vibrations or bent shaft and it is very powerfull on 6S, i use it on my streched hk450pro to 480 using Tarot parts. It seems that quality depends on luck or carma or something...

bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I run this on my Gaui X3 with 6S Nano-Tech 1300 mAh. Absolute blast. Totally worth of money. Why would you pay $$$ for other name brands?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Unfortunately my motor came with bent shaft and it also vibrates way too much to be used on my hk450pro DFC - 3axis gyro is having big problems because of vibrations... Too bad, it could be a very good powerful motor...if well made. HK, PLEASE quality check this motors before selling them.

Bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ist mit Abstand der schlechteste Motor, den ich vom HK bekommen habe. Luft unrund, eiert und vibriert. Reklamation macht auch keinen Sinn, da obwohl in EU gekauft, wird diese in UK abgewickelt. Porto kostet mehr als der Artikel.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have this motor in my450 pro. I received the motor with a slightly bend shaft so I ordered a scorpion shaft. after put this shaft in de motor I still had vibrations. motor is very badly balanced en shaked my heli apart. before I had a sk3 motor and had no problems at all maybe this was just bad luck and ordered a new one today. lets see what happens with the new motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For you who would like to us this motor in an airplane (full contact combat ). You will have to reshaft the motor. Any 4mm shaft of the same length will do. Also a 8x4 prop with a 3s works. Very powerful motor . Perfect for flying wing with around 48" wingspan.
Jim
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。