注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

NTN-600无刷V-赫尔R / C船(675毫米)随插即驱动器

NTN-600无刷V-赫尔R / C船(675毫米)随插即驱动器

QTY:

Now save 保存 AU$ 56.44 AU$ 56.44

Special Price AU$ 187.53 AU$ 187.53

You save 保存 AU$ 56.44 AU$ 56.44

Was  AU$ 243.97

Rating:
Stock:
重量:
1989
SKU:
HK-NTN600

Price War

产品介绍
在NTN-600是一个非常快速和完美的完成V型船体赛艇,并配有功能强大的2881kv水冷无刷电机和硬件。
所有的硬件​​被包括并且是良好加工,精加工成珠喷砂和阳极氧化以防止腐蚀。
您将需要一个4000mAh的3S或更大及50A ESC键这艘船权力,全面提速。

规格。
长度:675毫米
宽度:155毫米
高度:100毫米
重量:990克
电机:28-58大小2881kv无刷水冷
ESC:50A水冷(必填)
驱动系统:3.18毫米
需要。
无线电系统(双声道)和接收器
1个3千克标准尺寸的伺服
4000mAh的3S 20C前列
50A ESC
*很快到达备件。
Product
Specifications

额外信息

  • 商品编号:
    HK-NTN600
  • Brand:
  • 重量(g)
    1989.00
  • 长度
    730.00
  • 宽:
    140.00
  • 高度:
    210.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
The Photos in the listing do not show a true representation of the item !
The listing shows a 'Stepped Hull' but in fact the hull is not stepped it s only smooth. This difference is a huge issue regarding the true value of the Boat ! and very poor when it comes to being able to trust what the listing shows when deciding upon making the purchase of other Hobby King Product !
Quality
Value
Overall
Quality
Value
Overall
I bought this boat despite negative reviews. The first thing I did was to replace the prop with an Octura642 3/16" drive. I purchased a 3/16" to 1/8" prop adapter from USA, couldn't find one in the UK. I Powered it with a 4000mah 3C Lipo not the best of fits, but set it as far forward as the motor mount will allow. I had to balance it out by adding 260gms of lead to the servo side. It allows water up the flex shaft but noticed that there was a large gap between the dog drive and the flex shaft tube carrier. Removed this gap by tightening the prop and forcing the dog drive up the shaft to close the gap. Need to test water ingress but am confident that this mod will reduce it. The water cooling is useless, it is very difficult to blow through the inlet to outlet so water flow stands no chance. There are no kinks in the piping, I will therefore have to run an alternative cooling method. However with this setup and a little prop drive angle tuning it is fantastically fast and sits nicely on the plane. A joy to own and pilot.
Quality
Value
Overall
Quality
Value
Overall
nice boat, didnt tested it yet , but looks great
Quality
Value
Overall
Quality
Value
Overall
Bought this for a friend as his first boat. Only had a 120A ESC left that supports down to 3Cells, so maiden was with 3S and it went pretty fast, stable and with no water in it after 5 minutes. Then we tried a 3 blade prop which resulted in very low speed. Next attempt was a 4S 4700mah - THIS IS FUN LIKE HELL! At least with the original 2 blade prop, with 3 blades it only flys around in the pond in all directions. And no overheating - regardless that the watercooling does not work! The concept is a bit overkill, standard inrunnercooling AND motormount as well, but it does not work even with only one cooling connected. I think about replacing the inlet. After a few runs the mount for the lipo broke down but can easily glued in again. For the money and with a bit of experience it's good fun!
Quality
Value
Overall
Quality
Value
Overall
The only thing this boat is quality finish, the rest is crap, poor stability, recommended battery is too heavy for the size of the vessel at high speed it tends to sink, too much water enters the telescope despite spending grease regularly , already burned two servants to enter the water. I do not recommend buying this product hobbyking because no one plays good fun. To give you an idea of how bad the boat, the telescope it is on a slope below the float level of the boat, which facilitates the entry of water through the telescope.
Quality
Value
Overall
Quality
Value
Overall
Otima Lancha...



Acabamento de primeira, veio muito bem embalada e sem nenhum problema estou usando como ESC um Aquastar 120A. recomendo a compra desta maquina... simplesmente perfeita!
Quality
Value
Overall
Quality
Value
Overall
Hi.

I have no runed this boat a few times. As some other says, the 50a esc fail after 5 minutes of 11,1v run. I have no switch it with a Turnigy marine 60A. I have not nailed it in yet, so its wery unstabel i high speed. I have plans of laying som lead sheets in the bottom in back of the boat. It is plowing to mutch, so some weight in the back is nesesary. The prop is blunt, so I'm going to switsh it with a balansed prop from grimracer.
Quality
Value
Overall
Quality
Value
Overall
Buena lancha, precio normal.

Es muy tcnica y algo compleja de ajustar, como viene de serie no navega bin, requiere bastante ajuste de pesos y modificar la posicin de batera, el capatador de refrigeracin, ngulo de helice y timn.

Una vez bin ajustada navega decente, un peln escasa de motor, pero es una pasada como se agarra en el agua.

Ha costado un poco de trabajo centrar bin todo, pero ahora va genial !!!!!!
Quality
Value
Overall
Quality
Value
Overall
This is a great looking boat, I have not run it yet as I am waiting on my lipos. I've done the bath test and had a bit of water comming in but that was easily fixed with some sealant. I will be changing the esc to a 60amp and maybe the motor to run it on 4s. I would definately reccomend this boat if you like the scale model look.
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

2 download now [712kb]
1 download now [766kb]
2 download now [712kb]
MANUAL download now [2.64Mb]

产品标签

使用空格分隔标签。使用单引号(')标注词组。