注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

OrangeRX DSMX / DSM2 /泥盆可选择的2.4GHz发射模块(JR / Turnigy兼容)

OrangeRX DSMX / DSM2 /泥盆可选择的2.4GHz发射模块(JR / Turnigy兼容)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 41.27
Rating:
Stock:
重量:
79
SKU:
9171000536-0

Price War

产品介绍

该OrangeRX切换的2.4GHz发射模块提供了一个简单,方便,廉价的方式来利用你的基于模块的JR / Turnigy兼容发射器。不同于有固定的协议,本机可以DSM2(1024/22毫秒,2048/11毫秒),DSMX(22毫秒,11毫秒)或科尔兼容的协议之间进行切换的标准模块。

该模块有4种可选的输出功率电平。只需删除您现有的模块,插上OrangeRX切换模块中,你准备绑定到任何DSMX,DSM2或兼容科尔接收器。这一高超的模块的另一个特点是,它具有支持AETR或TAER可选择通道映​​射。

特征:
•与任何JR / Turnigy兼容基于模块的发射器工作原理
•5切换模式:DSM2 1024/22毫秒,DSM2 2048/11毫秒,22毫秒DSMX,DSMX 11毫秒,科尔
•4开关选择功率输出
•易于访问绑定按钮
•范围检查模式
•可选通道映射

眼镜:
兼容性: 标准JR风格5针基于模块的发射器(JR / Turnigy兼容)
2.4GHz的协议:DSMX / DSM2 /科尔兼容
输入电压:6 - 18VDC
电台类型: 全方位的系统

包括:
OrangeRX DSMX / DSM2 /泥盆兼容的2.4GHz发射模块
2.4GHz的天线

请注意:
OrangeRX模块使用一个唯一的全局ID绑定。在结合与其他品牌的接收机问题的情况下按模块“更改ID”按钮,将模块ID更改为该模块预留的独特价值。有超过4十亿唯一的ID的分配给OrangeRx模块。


请注意:
这不是一个的Spektrum DSM2 / X科尔产品,也不是一个的Spektrum DSM2 / DSMX /科尔产物的副本。该和的Spektrum DSM2 / DSMX品牌地平线嗜好美国的商标。 OrangeRX产品不是黑市或假冒产品的Spektrum。 OrangeRx质量有保证。

Product
Specifications

额外信息

  • 商品编号:
    9171000536-0
  • Brand:
  • 重量(g)
    79.00
  • 长度
    90.00
  • 宽:
    35.00
  • 高度:
    65.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
It has alot of binding issues with the HH bnf's.

after sitting unused in a drawer over the winter it no longer functions at all
Quality
Value
Overall
Quality
Value
Overall
Hatte gehofft dass, das Devo mit meinem Modell UMX AS3Xtra von E-filte geht. Leider nein. Gaskanal geht nicht.
Quality
Value
Overall
Quality
Value
Overall
Not fit for TGY9X without modifications. Square hole around pins on case back is too small for 9X (9X have tall plastic pins support around metal pins). I'am cut a lot of plastic frome case to make it fit into place. I'am also have 9XR and this module fit into it without any modifications (9XR have longer pins without any plastic support).
Quality
Value
Overall
Quality
Value
Overall
I found this module to work well. With the Taranis, easy set up, I bound it to an integrated dsmx receiver on the quanum pico first time, and also to 1 spektrum and another orange rx.

Im using it for small stuff, so I cant speak for range, but for me its more than sufficient.

Does what it says it does.
Quality
Value
Overall
Quality
Value
Overall
Have had this Tx for a few months and just found out that you cannot use it unless your receivers are all the same mode ie DSM2 or DSMX. when this transmit module is set for Auto detect, it will set itself for the last mode that it bound it's last receiver to. I have 2 orange receivers, an R1020x 10ch which auto binds in DSMX mode & an R615X 6ch which auto binds in DSM2 mode so if I bind the 10ch first then the 6 channel, I can use the 6 channel but not the 10 channel. Same if I bind the 10ch last then I can't go back to the 6 ch while its in auto mode. You have to shut off the radio, remove the TX module and set it to manual & also the mode you need with the dip switches to access the receiver you did the first bind on. Older versions of this type Tx allowed you to switch modes by pressing the bind button quickly 3 times but this one doesn't work that way.
Quality
Value
Overall
Quality
Value
Overall
It works poorly. frequently needs to be rebound to model (sometimes just swapping a battery) other times i have to turn the external RF module on and off several times for the models to start responding to inputs
Quality
Value
Overall
Quality
Value
Overall
I bind it with a Spektrum DSM2 ladybird (all switches to their default value:OFF). It works as advertised. I opened the module and check the soldering with a binocular: it is clean and OK. So far, so good. Very happy for the price.
For OpenTX (2.0.17 or greater) users, the correct settings is: Protocol: PPM / Channels: 1-8 / Frame length: 22.5ms / Polarity: positive / PPM delay: 300us
Quality
Value
Overall
Quality
Value
Overall
Has problems binding and working with nano qx.
Using DSMX, I can get it to bind but the nano gets twitchy with inputs - many similar observations on youtube and forums.
Using DSM2, I can get it to bind in 1024/22ms mode (only switch 3 on), however, sometimes it takes several tries to bind it and the transmitter and the receiver don't remember each other from previous binds so I need to try a couple of times each time.

I hope these problems can be fixed via firmware updates soon to make this a usable product. Reports of using the transmitter with standalone receivers (both DSM2 and DSMX) seem to be fine even though I have not tried these personally.
Quality
Value
Overall
Quality
Value
Overall
I only got 800' range using when when the light goes out. The throttle went to full at 500' when moving the airplane. There was no difference in range when the bind switch was pressed. The power is not reduced to 1mw when the bind button is pressed. If it was the range would be about 5', since that is 70-1 divided by 2, because 4x the power is needed to get twice the range. The range test is completely false. It just feel good. Even if it does like the manual says, that is not good. A range test has to be negative not positive. You should be able to move out of range and the rec. quits. This is a very bad system and should only be used for park flying. Fail safe says it will go to the position at bind. The surfaces do stay straight, but the throttle went to high on an electric. Dangerous. I will try putting the throttle on high to see if it reverses.
Quality
Value
Overall
Quality
Value
Overall
very good module works super great with other orx products!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。