注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

OrangeRx打开LRS 433 9CH接收机

OrangeRx打开LRS 433 9CH接收机

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 25.09
Rating:
Stock:
重量:
31
SKU:
9171000147

Price War

产品介绍

所有新OrangeRX打开LRS接收是一个开源的接收器,可以通过编程来使用协议的选择,并在400〜460MHZ范围内的任何通道。它甚至可以被编程,以利用额外的功能,如遥测和更多!

该OrangeRX打开LRS Rx为您的自定义项目的一个非常通用的接收器完美。
它利用了100mW的RFM22B射频单元和Atmega328处理器Arduino的引导程序,允许你上传预先编写代码或编写自己以满足您的RF系统的需求。而且,因为它使用相同的RF芯片作为我们OrangeRx打开LRS的Tx模块,这意味着可以将本机程序,以充当一个接收机或一个发射机。这开辟了新的可能性的世界,为您的自定义R / C项目!

默认代码利用3通道跳频。如果你想使用一个不同的协议,您可以编写自己的代码跳或者干脆下载已有的许多预先编写的开放LRS代​​码集之一。

特征:
•为3.3V的Arduino FTDI支持
•串口固件上传和遥测应用
•3.3V I2C端口,所有现代的传感器,如WiiMotionPlus,WiiNunchuk,MEMS陀螺仪,气压计,加速度计和更多
•9路伺服输出
具有反向极性保护和1S脂的支持•3.3V MIC5205基于稳压器
•PWM输出作为RSSI输出。 (您可以修改基于PWM RSSI信号的代码)
•红色和蓝色LED指示灯
•RFM22B收发模块,包括Si4432的芯片配置0-100mW输出,跳频能力和数百个功能
•16MHz的Atmega328处理器,拥有专业的Arduino兼容微型引导程序

眼镜:
频率:433MHz的
输入电压:3.7〜15VDC
IC:ATMEGA328P
外形尺寸:52x29x15mm
重量:10.5克(瓦特/出天线)

包括:
OrangeRx打开LRS接收
天线

*注:打开LRS的设置和使用需要计算机编程技能和基本的Arduino经验。这不是一个“即插即用”系统。请参阅编程信息,固件下载和更多的资源“文件”选项卡下的附件。

*注:这是不是一个原始的Arduino品牌的产品。

Product
Specifications

额外信息

  • 商品编号:
    9171000147
  • Brand:
  • 重量(g)
    31.00
  • 长度
    100.00
  • 宽:
    20.00
  • 高度:
    40.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
It works, has 8 channels and RSSI. Can be converted into a radio beacon by simple re-flashing. Cost nothing.

Some samples can have poor radio-module, be prepared to buy several and choose best for long range.
Quality
Value
Overall
Quality
Value
Overall
Great receiver for experienced users. Light weight, good sensitivity! 100pcnt programmable. The maximum range received at the receiver is about 6 kilometers away. One minus - very difficult to master, this receiver is not suitable for people who like to "plug and play".
Quality
Value
Overall
Quality
Value
Overall
Cheap and really long range also you can modify it via openlrsng firmware fo more options.

Quality
Value
Overall
Quality
Value
Overall
nice Receiver, easy to setup, many Funktions
Quality
Value
Overall
Quality
Value
Overall
The problem i faced with the openLRS receiver is that gives you the error 29 on the DJI Naza v2 M. The Aileron and Elevator don't have enough travel to reach the extreme ends of the RC calibration of Naza assistant, thus giving me error 29.

This error means you can't fly. Make sure to buy an FTDI adapter to upgrade the firmware. I haven't updated the firmware so I can't tell you if it fixed the error 29.

My RIMLEC UHF receiver, however, hooked up to the NAZA straight away without this error.
Quality
Value
Overall
Quality
Value
Overall
Goes great with the OPen LRS orange TX
Quality
Value
Overall
Quality
Value
Overall
Works perfectly once flashed with the latest version of openlrs.
Quality
Value
Overall
Quality
Value
Overall
Bought two of these and they have worked well so far. Takes a while to set up using Arduino, but a great value.
Quality
Value
Overall
Quality
Value
Overall
Very Powerful receiver capable of being upgraded with better software and doing advanced features like diversity. Also very good range with proper antennas
Quality
Value
Overall
Quality
Value
Overall
I bought 10plus of those RX. A lot of them didn't work at all (3 or 4). In most case, the Atmega328 chip is faulty (i mean deadly faulty). For those who work, i flash them with openLRSng, and i'm pretty disapointed. I lost 3 planes not so far away (1-2km), even with my dragon link's antenna. Sometime, it works fine, sometime, i lose connexion at 100m... Interferences maybe ?

I give up on openLRS for frSkyplusbooster.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。