注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

OrangeRX RX3SM微三轴飞行稳定W / DSM2支持4路的2.4GHz接收器W /远程开/关

OrangeRX RX3SM微三轴飞行稳定W / DSM2支持4路的2.4GHz接收器W /远程开/关

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 30.99
Rating:
Stock:
重量:
18
SKU:
9171000256

Price War

产品介绍

所有新RX3SM微型飞行稳定,集成OrangeRX DSM2兼容4通道2.4GHz的接收器是理想的微型模型。它消除了在模型中使用单独的接收器,不仅使得安装更加整洁,方便,但是,可以方便地结合和飞行稳定飞行的需要!该RX3SM DSM2兼容的稳定提供支持V-尾三角模型,还提供了一个远程开/关功能,可以通过发射器的AUX通道进行控制。

利用一个单一的高精度3轴陀螺仪MEMS的RX3SM DSM2兼容稳定剂能够在几乎所有的固定翼飞机飞行稳定的!它通过在飞行中自动纠正副翼,升降舵和方向舵渠道提供额外的稳定性。这补偿了飞机的态度,由于风和其他因素随意更改。总之,它使你的飞机更稳定的飞行!

该RX3SM DSM2兼容稳定器已使用专门设计的微车型,在只有很少10克称重!大小已经完美匹配,与我们的Durafly Mircro系列使用。它还与利用3芯微Molex连接与1.25毫米引脚间隔任何其他微型模型兼容。

本机是非常简单的安装和使用。可调增益设置都是预先设定为50%,提供温和的稳定。以根据需要增加或减小补偿各通道(AIL,ELE,RUD)可以很容易地调节增益为每个信道。

因为我们的设计,测试和制造完全这些单位的内部(从3D / 2D绘图材料采购,总装等),我们可以完全控制生产,保障权利,通过将产品送到您从设计产品的一致性。此外,去除中间人意味着我们可以更好地驱动价值的市场,并在工厂(我们的)零售价格这些单位!

特征:
•完美贴合所有Durafly微型模型
•OrangeRX DSM2兼容4通道2.4GHz的综合接收,只需绑定飞!
•微莫仕3针连接器1.25毫米间距
•能够在几乎所有的固定翼飞机飞行稳定(包括V型尾翼/三角洲型号)
•可通过发射器的AUX通道控制远程开/关功能
•支持3D飞行而不破坏稳定
•副翼,升降舵和方向舵独立陀螺增益调整
•易于访问的陀螺仪上的反转单元前面的开关
•紧凑,重量轻的设计

眼镜:
综合接收:OrangeRX DSM2兼容4通道2.4GHz的
IC:Atmega168PA
陀螺仪:3轴MEMS
输入电压:4.8-6.0V
信号伺服:1520us类型
伺服/ ESC连接:Molex公司微型3脚与1.25毫米间距
尺寸:44x21x15mm
重量:10克

*注:适用于下方的“文件”选项卡下的下载用户手册

*注意:
1)这不是一个的Spektrum DSM2 / X产品,也不是一个的Spektrum DSM2 / X产品的副本。
该和的Spektrum DSM2 / X品牌地平线嗜好美国的商标。
2)这不是一个地下黑市的Spektrum假冒产品。 OrangeRx质量有保证。

Product
Specifications

额外信息

  • 商品编号:
    9171000256
  • Brand:
  • 重量(g)
    18.00
  • 长度
    40.00
  • 宽:
    10.00
  • 高度:
    20.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I don't know if this is a good product or not . My issue is with the purchasing and retun policy of this company. You have warehouses in the US then you should accept credit cards and stop with the 3rd party garbage. Horizon hobby does not do this Amazon does not do this. So long Hobby KIng I be sure to pass this along to everyone I fly with.
Quality
Value
Overall
Quality
Value
Overall
This is a great little RX. The stabilization really helps in the wind. Be sure you note that this is the micro connector, not JR/Futaba.
Quality
Value
Overall
Quality
Value
Overall
Hi all,

not so satisfied so far with the receiver as the servo throw is too low for an agile mirco slow flyer which seems to me to be the typical use case for this kind of receiver. See also https://www.youtube.com/watch?v=UPoFwtcJPFw where the problem is visually shown
Quality
Value
Overall
Quality
Value
Overall
The second comment on this. In the first, I couldn't get a signal from the ESC to the unit (no flashing LED). The problem was the voltage polarity to the receiver. I used a HobbyKing Molex 1.25 pigtail to connect to the Turnigy ESC. I simply connected the red on the pigtail to the red on the ESC, etc. This was wrong! I reversed the white and black and it works! If you went by what the WIRING section of the manual says you would be wrong! It is poorly written and refers to "inner pins" and "pins on the outer edge". Maybe a Chinese translation to English that didn't go well?
Quality
Value
Overall
Quality
Value
Overall
Habe diesen kleine Empfnger in der F16-Wurfgleiter verbaut. Mit 2x1,9g Servos und Aussenlufer mit 3 Zeller Flugakku. Alles zusammen ca. 80g. Das Ding ist ohne diesen Kreisel fast unfliegbar. Mit diesem Empfnger liegt der kleine Flieger wie ein Brett in der Luft. Super, sehr zu empfehlen.
Quality
Value
Overall
Quality
Value
Overall
Bought to put on my eflite inverza because its twitchy in wind. After finding out the wiring instructions are incorrect I corrected the wiring and the rx works well. I just need to fine tune it. As the wiring instructions say all signal wires are supposed to be towards the center of the 4 molex cluster, which is incorrect. The wires must be ground, pos, neg across the top and bottem if the molex connectors are at the top of the rx. Oh and on this plane the polarity of all the wires must be flipped. Its a pain but in the end its worth it.
Quality
Value
Overall
Quality
Value
Overall
Not very pleased with this device. The gyro simply does not give enough output to provide effective stabilization of a model aircraft. I fitted one into my little SPAD XIII and with gyro set to maximum on all axes it has vertually no effect on models stability. I purchased a second RX3SM incase the first was faulty but its performance was identical. The larger RX3S device produces much more control resonse to rotation. I would rate the RX3SM as useless and not recommend it to anyone.
Quality
Value
Overall
Quality
Value
Overall
Put on a micro slick Durafly. Very nice. Good job!
Quality
Value
Overall
Quality
Value
Overall
Highly recommended, Have bought a few of these and never had a problem.

Setup is a breeze.
Quality
Value
Overall
Quality
Value
Overall
ideal para pequeos modelos indoor
Quality
Value
Overall
View all reviews
Upload
Videos
  • OrangeRX RX3SM DSM2

  • My sakura is almost impossible to fly without the stabilization.

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。