注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

OrangeRx SF7003XS双叶FHSS兼容7CH的2.4GHz接收器瓦特/ FS,系统总线和3轴稳定

OrangeRx SF7003XS双叶FHSS兼容7CH的2.4GHz接收器瓦特/ FS,系统总线和3轴稳定

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 21.73
Rating:
Stock:
重量:
41
SKU:
9014000041-0

Price War

产品介绍

该OrangeRx SF7003XS具有的所有属性,并在OrangeRx品牌原有的FASST兼容接收机的功能,但是这一次,现在运行在双叶后FHSS(跳频扩频)系统。该接收机还具有S-Bus和一个内置的3轴稳定这是模型飞机的辉煌,帮助初学者掌握RC飞行和有经验的飞行员的技术人员能够使他们的飞行更加顺畅。该接收机是完美的长翼展大型滑翔机,它确实有助于在更高的高度热气流时顺利进行,转弯和鼻子的态度。

稳定器功能有5种模式,混频器关闭,双副翼,V型尾翼混合,混合三角洲和双副翼/ V尾搅拌机。有独立的,简单易用的副翼,升降舵和方向舵功能陀螺增益调节,稳定功能还可以打开和关闭在通过CH5飞行切换。该S.Bus功能非常适合大型模型和滑翔机,利用大量的舵机,尤其是在翅膀,它减少布线量,并保持整洁,整洁。

输入3.6〜8.5V,如果你想使用LV和HV型伺服这是伟大的电压接收器也将接受广泛。

用下面的双叶FHSS 2.4GHz的空气系统兼容:4YF,6J,8J和10J,也可以与下的S-FHSS协议模式的T14SG使用

特征:
•轻量级(16G)
•使用FHSS 2.4GHz的空气系统兼容
•7个通道
•内置3轴稳定
•5稳定模式
•支持系统总线
•设计紧凑(54×32点¯x13毫米)
•故障保护和电池故障保护
•极低的延迟
•快速帧速率
•从跳频频率的伪随机序列
•先进的算法创建一个安全的频率

眼镜:
类型:SF7003XS
输入电压:3.6〜8.5V
工作电流:60毫安最大
电池故障安全电压:3.8V
延迟:6.8mS
灵敏度: 关于-96dBm
外形尺寸:54×32点¯x13毫米
重量:16克

包括:
OrangeRx SF7003XS接收器
塑料螺丝刀进行调整
说明书

注意:
所有OrangeRx接收器配备了12个月的保修期。这不是一个双叶接收机,也不是一个双叶接收机的副本。双叶,FASST和FHSS是双叶公司(JP)的注册商标。

Product
Specifications

额外信息

  • 商品编号:
    9014000041-0
  • Brand:
    N/A
  • 重量(g)
    41.00
  • 长度
    145.00
  • 宽:
    20.00
  • 高度:
    100.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered it to use with my Futaba T10J transmitter under S-FHSS protocol. It binds easily in a second. Tested it with my standard analogue servos and worked fine. Stabilization mode also works fine, it can be controlled on 5th channel default.
On the manual it says "Servos must be digital and high speed", I tested it with my analog and rather slow servos and worked without any problem. There was no odd sounds and movements on the servos. I will update this review for long-term usage with analogs and when I do a range test.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I Bought 3 of them!
One thing very important, it works only with digital servos !!!! So be careful !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
stabilization works really well, binds in a less than a second to my t6j and t14sg transmitters.I needed to set end point on both my Tx on channel 3 (throttle) low side to 80pcnt and then recalibrate esc to Tx in order to get failsafe to shut motor off. not something i have ever had to do on futaba original receivers. Mid point on the trim pots is 0 and turning clockwise and counterclockwise gives poss or neg stabilization on the given channel, so be careful as you can reverse the stabilization direction when centering the pot. this is not that clear in the supplied manual.always need to reboot for adjustment to take effect. it does mean you can mount the unit in any orientation and get the desired correction movement on any channel by simply turning the trim pot the other way from zero if it is not right.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。