Orlandoo OH35P01 4WD 1/35履带式套件是一个梦幻般的规模的塑料套件，也恰好是一个全功能的无线电控制皮卡车，将处理各种规模的地形。这是当我们看到它，我们知道我们必须下订单，主要是因为每个人都在办公室里想其中的一个产品之一。在此套件Everytyhing说，注重细节，从非常详细的身体，超软垢图案的轮胎，以规模差异和镀铬MAG轮子，一直到坐在整齐挡风玻璃上的雨刷。
Awesome little truck, The attention to detail is very amazing for a rc truck this size. It offers solid axles on 4 link suspension that's very simular to some current 1/10 crawlers.
I was amazed building mine and even today I still find it impressive, its a clever design.
I recommend this product to builders or scalers alike. and definitely do not recommend it for racers or small children. its more for people that enjoy building and painting static models that want a model that really works or people that like there micro rc cars and are looking for somthing slow to put around with.
Notes: HK-5320S Ultra-Micro Digital Servo does work with the stock servo mount and the Orlandoo 2 in 1 ESC (note, does have the wrong smaller plug, but still plugs in)Not sure why my first review didn't work so I'm trying again.
This is a really tough build but very satisfying when it's done.
Take the time to clean up each part before you install it as even a tiny bur will make it hard to assemble.
Have a 6mm drill bit handy for cleaning up bearing housings.
You'll need a tiny battery and servo. Ultra Micro server and 350mAh battery - I bought a 500mAh but it's too big and doesn't quite fit.
It's a very nice model, more like an airfix model than an RC car. Fun to drive - the scale is a novelty but don't expect it to do too much given it's size. It's a great crawler when you give it appropriately sized obstacles.This truck was a lot of fun to build, and it was a pain in the butt at the same time. It has a ton of flex to crawl over stuff. Ifor you've been thinking of getting it, do it! I will be buying a second one soon.My Kit arrived with some missing parts and others parts in double quantity.
30 days ago i sent an RMA request but i'm sill wait for an anwer...
i hope someone from HKing will solve my problem.Bad quality plastics, driveshaft uni joints fall out, HK recommend wrong servo. Don't bother with it.Cool little model, but you better have patience. The screws are crazy small and will test your patience. If you can handle that it is actually fun to assemble. Fit and finish is fairly good for such a tiny truck. Wish there was a larger set of tires available for crawling but that would throw out the scale and this is very much a scaler. The shocks bind up badly, i suggest that you smooth the large end of the shock shaft with fine sandpaper before assembly so that they dont catch inside the plastic shock tubes. Also as a comenter said the servo that hobbyking recommends is not correct and does not fit. Use HK-5320. I also found that the battery listed on the combine tab, at 180mAh gets pretty hot, i would find one around 500mAh as they say in the listing and not the combine tab. Using the wheel weight kit gives you pretty much solid front tires as the weight is only slightly smaller than the tire itself and leaves no room for foam even. You end up with about 1mm of deflection in the tire and thats it. I chose to leave them out so the tire could flex and conform.Achtung! Turnigy TGY-1550A Micro Analog Servo 5.5g / .10sec / 0.9kg passt nicht!! Er ist viel zu gross!
Die richtigen masse sind 17mm X 6.2mmI have this kit, came yesterday as i'd seen it a few weeks back, so waiting for it to be in stock and ordered it plus the 150rpm gearbox and esc/light unit. It's a really good kit, i've built loads of car kits in the past but have to say this one is let down badly by the odd part. for example the tie-rod ends (plastic with holes in) are very poor, you push them on the ball joints and they are not tight enough to stay on and keep coming off. almost impossible to fix it really,( i will keep trying) apart from this it is a good kit which i do hope to finish, parts are so very small, used the box as a tray to keep your bits in, if you drop one of the micro screws you'll never find it again, comes with good mini tool kit also.im building this kit. it will not accept a 9g servo as stated in related products you will need a HK-5320 Ultra-Micro Digital Servo . thats what i have and it fitted well. good luck with the build. put a towel on your build table so the tiny parts dont bounce and roll on the floor. thank me later ;)Awesome Kit, takes a little time to put together but super satisfying once your done. it is a great crawler too. The only complaint is that the body was a little finicky to paint but That could be more on me :P. 150 turn is a tad slow but torque for days. I got a 500 on ebay and it really livens it up. All in all an amazing value.