专为速度，但与低翼加载，Parkjet 2划过天空的尖叫声，仍然可以在滑行一个缓慢的降落。这种结合增加了一个3轴飞行稳定系统，该Parkjet 2有一个令人难以置信的广阔飞行包线。
新的和改进Parkjet 2包括一个强大的2623-4500kv无刷电机的外转子，15A ESC和加强电机安装让这款机型在性能提升显著改善玻璃纤维。为了帮助管理这些额外的动力和极限转速高，一个3轴飞行稳定器已预装在全速运行，以保持对模型的水平直线。
•“即插即飞”格式 - 只需添加你自己的无线电系统和电池
so I got this plane and an AXN floater jet with the idea to learn how to fly. with a few hours on a sim I thought I was ready to go.. parked the floaterjet into the ground nose first and it needed some glueing so I go the parkjet out.... omg how cool is this thing... after working out we had to throw it to lauch to keep fingers intact. this this a rocket and with the stabliser even I as a noob could fly it happily at half throttle.. very happy with this thing.I really liked this model. It is quick and responsive. Care should be taken not to over drive the electronic stabiliser as it can be turned up far enough to cause oscillations at high speed.
The most fun i have had in a while. Make you want to fly.I had a problem with the hatch as although hinged at the front and held at the back with magnets was not easy to keep closed. The supplied CD did not work. Had a good 7 mins fun flying this plane but lost control during final landing approach and the nose broke off. Back to the repair shop.This is a really nice little model.
The tail fins fit into the pre-formed slots with a friction fit. They are fixed with the epoxy supplied.
The hatch is hinged at the front and held at the back with magnets.
Hint: Keep cables on the centre line using small cable ties to avoid pinching as the hatch is closed.
Using an extension cable (10cm) will allow the RC receiver to be moved to the front of the cockpit area.
The supplied CD gives full documentation on the plane and the electronic stabilisation system.
I look forward to flying this tomorrow!