New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

幻影FPV飞翼飞机EPO1550毫米(PNF)

幻影FPV飞翼飞机EPO1550毫米(PNF)

Discontinued Product

Please continue searching for a similar product.
重量:
2341
SKU:
374000014
WANT FREE SHIPPING? Click here to find out more!

幻影是最新加入到我们的第一人称视角(FPV)的型号范围。这是一个伟大的传单用非常明确的操纵品质,出色的稳定性以及大量机翼面积以应付FPV使用额外负荷。

幻影拥有强悍EPO建设与相机托架成型 - 一个前瞻性的只是鼻子底下,另一个安装在与胶合板支持预装树冠顶部。预装项目,舵机,900kv的外转子电机和30安培速度控制器发言还安装整装待发。

机身的组装十分简单,从字面上4胶缝要求 - 也包括发泡胶!

这种模式能够在3秒4500mAh的脂和树冠下的空间超过30分钟的航班是海绵状!有足够的空间供你选择FPV装备。

特征:
•超韧EPO建设
•超稳定的飞行性能
•优秀FPV平台
•在4500mAh的3S脂30分钟加飞行时间
•易于手工启动,易于向土地
•在低速和高速稳定的操控性

眼镜:
翼展:1550毫米
长度:683毫米
飞行重量:900克

包括:
EPO模塑泡沫部件
2×9克舵机
30安培Esc键
900kv无刷电机外转子
2个螺旋桨(9×6)
碳纤维桅杆
硬件设置
贴花表


要求:
4通道收音机(带三角混合)
4500mAh的3S Lipoly电池

  • SKU 374000014
  • Brand -
  • 容量(mAh) -
  • 重量(g) 2341.00
  • 长度 870.00
  • 250.00
  • 高度 330.00
  • Phantom FPV Wing

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Muito bom e estvel, o motor da verso PNF no super potente mas suficiente.

As Hlices fornecidas no kit so lixo,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Muito bom e estvel, o motor da verso PNF no super potente mas suficiente.

As Hlices fornecidas no kit so lixo,

Clocked up a few hours with the FX-61 now. Great fun to fly, looks awesome and great flight times. Unfortunately though, the flight footage is not as good as with my Bixler 2 due to a constant oscillation in the airframe. Its not jello, i'm using an anit vibration plate, but a constant flapping that makes the video hard to watch. I now see this in other video from other FX-61 pilots. I assume that additional reinforcing of the airframe is needed. Needs a lot more correction to keep flying level compared to the conventional fixed wings with vertical and horizontal tail stabilisers. Perhaps I'll look into a larger version of the Bixler type plane like the sky eye.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Clocked up a few hours with the FX-61 now. Great fun to fly, looks awesome and great flight times. Unfortunately though, the flight footage is not as good as with my Bixler 2 due to a constant oscillation in the airframe. Its not jello, i'm using an anit vibration plate, but a constant flapping that makes the video hard to watch. I now see this in other video from other FX-61 pilots. I assume that additional reinforcing of the airframe is needed. Needs a lot more correction to keep flying level compared to the conventional fixed wings with vertical and horizontal tail stabilisers. Perhaps I'll look into a larger version of the Bixler type plane like the sky eye.

Its fantastic plane. Great for FPV. There is a big pleace inside of plane what enogh for Futaba 14ch receiver, esc, joystic what is for OSD Menu and 4,5 Battery. I made a plate by wood what i putted with glue above the battery and i putted OSD autopilot onto wood.

Everything fine with this modell.

I recommend to everybody who hasitate what is better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its fantastic plane. Great for FPV. There is a big pleace inside of plane what enogh for Futaba 14ch receiver, esc, joystic what is for OSD Menu and 4,5 Battery. I made a plate by wood what i putted with glue above the battery and i putted OSD autopilot onto wood.

Everything fine with this modell.

I recommend to everybody who hasitate what is better.

I received my wing on the 5/12/2013. It was will packed well and in perfect condition. Built it on Sunday morning and installed FPV gear then took it for the maiden it on Sunday evening. She is no speed demon top speed 70kph but is VERY VERY efficient and flies very stable win NO nasty surprises at all. Total flight time with 1X 5000mah 3s for motor and 1X 1000mah 3s for FPV gear was 40min with mixed flying habits. Would give 6 stars if it was possible as it is my new favorite FPV platform

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received my wing on the 5/12/2013. It was will packed well and in perfect condition. Built it on Sunday morning and installed FPV gear then took it for the maiden it on Sunday evening. She is no speed demon top speed 70kph but is VERY VERY efficient and flies very stable win NO nasty surprises at all. Total flight time with 1X 5000mah 3s for motor and 1X 1000mah 3s for FPV gear was 40min with mixed flying habits. Would give 6 stars if it was possible as it is my new favorite FPV platform

This is one of the best fpv wings I've tried so far, highly recommended

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is one of the best fpv wings I've tried so far, highly recommended

Just bought the phantom fpv through the Australian warehouse and received it without the right wing - beware, it may be a batch issue.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just bought the phantom fpv through the Australian warehouse and received it without the right wing - beware, it may be a batch issue.

This is a really nice model for FPV. It is very stable in flight, has sufficient power when running on a pair of 2200mAh 3S batteries using the supplies motor and prop. It is very quick and easy to build. Surface finish is super slick. On the down side the servo horns are flimsy and break off easily, I suggest replacing them as they tend to break while loading the model into the car ...... A 10x7 APC Prop will give better penetration on windy days, while not sacrificing too much in duration. Strap the batteries in with a loop of velcro going through the bottom vents, or else they can eject out the top of the model(even when stuck to the bay with velcro).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a really nice model for FPV. It is very stable in flight, has sufficient power when running on a pair of 2200mAh 3S batteries using the supplies motor and prop. It is very quick and easy to build. Surface finish is super slick. On the down side the servo horns are flimsy and break off easily, I suggest replacing them as they tend to break while loading the model into the car ...... A 10x7 APC Prop will give better penetration on windy days, while not sacrificing too much in duration. Strap the batteries in with a loop of velcro going through the bottom vents, or else they can eject out the top of the model(even when stuck to the bay with velcro).

Have flown the Phantom about 50 times now, and I am very happy with it. Super stable and predictable. The setup is very light but will get thrown around a little in the wind.

FPV video over the beach

http://youtu.be/8uI8GrLiQTM

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have flown the Phantom about 50 times now, and I am very happy with it. Super stable and predictable. The setup is very light but will get thrown around a little in the wind.

FPV video over the beach

http://youtu.be/8uI8GrLiQTM

Buy kit model. stock motor and esc not for fpv. stock motor can not payload well with 3s, also 4s. in the air not problem but launching with stock motor 4s and gopro and autopilot systems is big problem. it comes with these systems and 5000mah compact lipo 1450gr. buy ld3730 1000kv 3s-4s (need to buy extra acceserios) or 3015a 1000kv 3s motor. buy redbrick 50a and program it to brake (second beep to lipo, third beep to brake on) , 10x7 prob. these setup with 3s can push 1800 gr not fully battery. also stock esc can be used if you will just cruise and not need power but i suggest red brick50a. also recomended trust 55a but red brick much lighter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buy kit model. stock motor and esc not for fpv. stock motor can not payload well with 3s, also 4s. in the air not problem but launching with stock motor 4s and gopro and autopilot systems is big problem. it comes with these systems and 5000mah compact lipo 1450gr. buy ld3730 1000kv 3s-4s (need to buy extra acceserios) or 3015a 1000kv 3s motor. buy redbrick 50a and program it to brake (second beep to lipo, third beep to brake on) , 10x7 prob. these setup with 3s can push 1800 gr not fully battery. also stock esc can be used if you will just cruise and not need power but i suggest red brick50a. also recomended trust 55a but red brick much lighter.

3 star for electrnics 5 star for the others.

stock motor can not with 3s, also 4s. in the air not problem but launching with stock motor 4s and gopro and autopilot systems is big problem. it comes with these systems and 5000mah compact lipo 1450gr. buy ld3730 1000kv 3s-4s (need to buy extra acceserios) or 3015a 1000kv 3s motor. buy redbrick 50a and program it to brake (second beep to lipo, third beep to brake on) , 10x7 prob. these setup with 3s can push 1800 gr not fully battery. also stock esc can be used if you will just cruise and not need power but i suggest red brick50a. also recomended trust 55a but red brick much lighter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

3 star for electrnics 5 star for the others.

stock motor can not with 3s, also 4s. in the air not problem but launching with stock motor 4s and gopro and autopilot systems is big problem. it comes with these systems and 5000mah compact lipo 1450gr. buy ld3730 1000kv 3s-4s (need to buy extra acceserios) or 3015a 1000kv 3s motor. buy redbrick 50a and program it to brake (second beep to lipo, third beep to brake on) , 10x7 prob. these setup with 3s can push 1800 gr not fully battery. also stock esc can be used if you will just cruise and not need power but i suggest red brick50a. also recomended trust 55a but red brick much lighter.

  1. 1
  2. 2
  3. 3
  4. 4
No File Name Download [10085]
Little modification for FPV Download [2040]
507495604X1053396X38.txt Download [4]
507495604X1053396X1.txt Download [4]
Phantom mit Boscam HD Camera Download [453]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save