我们的PC-6制成坚固EPO泡沫完全成型机身。抵达作为一个插件和飞行模式，PC-6可飞行约一个小时的工作制。它不需要胶水构造，因为它是所有的螺栓或螺钉一起设计。预装4212 700 电机提供充足的动力为规模短距起飞和滑翔机牵引职责全部上很常见的4S 14.8V 3000mAh的脂。访问该脂是通过在飞机上的底部的舱口非常容易。无需拉断翼仅仅改变包装。虽然运动的规模模式，PC-6的特性规模机翼支柱和非常辨认一系列广泛的起落架。
•即插即用飞 - 只需添加无线电系统正，电池和飞！
马达：4212 700 无刷
4S 14.8V 3000mAh的
Always loved the PC 6 from my time in the Army. Mine arrived yesterday, unboxed and fully assembled that night and ready for its maiden flight today. A word on the unboxing and assembly. Not all the screws as detailed in the instructions were there. Not a big deal if you have screws from previous planes on hand. The rest of the assembly was very straight forward. I set everything as per the instructions including the CG. I used a 3300 4s Dualsky battery and had to add 2 ounces to the tail to balance the plane. Maiden including an additional 3 flights all went very well. Take offs and Landings were no problems at all on our grass strip. No hidden vices here. This ones a keeper for sure.admittedly i got the plane on the black friday deal for 118 shipped which was a great value on this plane. this was my first art tech plane and it came packaged nicely. fit and finish was spot on, it went together easily in about an hour. had the maiden today and it flies perfectly, drop the flaps full down and it slows to a crawl. I took it up about 200 feet, cut power and put on full flaps, full elevator, and it glided nicely all the way down. no tip stall. it felt a little underpowered so i'm not sure about the towing option but it had enough to fly around very nice and scale. the only thing i plan on changing are the main wheels which are ok but i think a little bigger air filled tires will soak up landing bumps better and give a little more clearance for grass runways.This is great model. It is one of the best i have purchased, great packaging, fly great and lots of fun things, dropping candy to towing a glider. It is very stable and easy to put together. With the Black Friday sale it is a steal, don't miss this one. As you can tell I love the planeFirst to write a review on the Pilatus Porter.....LOL
I am extremely happy with the plane and give it 5 stars , Everything was well packed and assembly / setup was a breeze . I am adding slightly larger Dubro wheels and have upgraded the motor to the NTM 42-30 750kv motor . If you are a Pilatus fan this plane is a must .Took advantage of $20 off plus the ANZAC day free shipping. Arrived in 4 days. Well packed. The instructions are just a few pictures. The plane goes together fine, but found the plastic supports for the undercarriage too short by about 4mm. I felt if I forced them into the wheel hubs so the screws lined up, there would be too much stress on the mountings. Wing struts fit fine with clips on the wing mounts. Unfortunately this means the struts are left sticking off the fuse. Would have preferred if the strut mounts in the wings hinged so they could line against the wing when stored.
Only other niggles;
I found that to fit my 4S 3300mA packs, I had to do quite a bit of cutting in the nose. At the recommended cg, I had to push the battery back under the wing otherwise it felt too nose heavy.
Tires are very hard. I would recommend fitting softer ones.
Flying wise. The plane flies well and has no vices. With about 20 degrees of flap it gets airborne in 3-4 meters. Full flap landings are great. The model slows down quickly and needs to be flown in.
I would have rated it higher if not for the issues mentioned.Worst packaging for a plane that I've ever seen from HobbyKing. Usually they do much better. This was honestly pretty bad and I'm surprised it didn't get damaged in transit. All they did was wrap it with brown wrapping tape and a little bit of paper.
Also the elevator servo was DOA, so right off the bat I'm going to have to replace it before I can fly it.
But the quality of the model is pretty good, the foam detailing is fairly crisp and clean. The elevator and rudder surfaces are a bit stiff, but the ailerons and flaps move very cleanly and crisply. Nice mounting for the landing gear. No instructions on how to mount the radio or all the hatches on the plane, but it wasn't too hard to figure out.
Hopefully it will fly as good as it looks.