注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

PixFalcon微PX4自动驾驶仪以及微M8N GPS和Mega PBD电源模块

PixFalcon微PX4自动驾驶仪以及微M8N GPS和Mega PBD电源模块

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 167.19
Rating:
Stock:
重量:
144
SKU:
9387000084-0

Price War

产品介绍

该PixFalcon微PX4自动驾驶仪,适用于固定翼,多旋翼,直升机,汽车,船只和其他机器人平台,能够将高性能的模块。它可以被视为高端研究人员,业余爱好者和工业设计师的青睐流行PixHawk高端自动驾驶仪的缩小版本,但它是一个更小巧轻便单位。
它是挤满了所有相同的功能和规格为大哥哥,但其较小的尺寸使得它与拥有的空间有限新型和外观设计更兼容。

包括在这集是PX4 PixFalcon飞行控制器,最新的微M8 GPS系统,提供高灵敏度和最小的采集时间,并且既包括一种方法来增强您的PX4及配件以及报告电池电压和电流回电源模块飞行控制器记录和遥测数据。

特征:
•内置蜂鸣器
•168MHz / 252MIPS的Cortex-M4F
•14 PWM /伺服输出(8故障安全和手动超越,6辅助的,高功率兼容)
•加法外设丰富的连接选项(UART,12C)
•Intergrated备份系统在飞行中恢复和手动超越与专用的处理器和独立电源(固定翼使用)
•备份系统集成了混合,提供一致的自动驾驶仪和手动超越混合模式(固定翼使用)
•板载安全开关和外部安全开关
•多色LED视觉指示器
•MicroSD卡高速率记录在一定时间过长
•UBOX超精密微M8 GPS
•超级配电板电源模块与5.3V 3A UBEC

规格(处理器):
32位STM32F427的Cortex M4内核与FPU
168MHz
256KB拉姆
2MB的Flash
32位STM32F 103故障安全协处理器

规格(传感器):
意法半导体16位L3GD20H陀螺
意法半导体的14位LSM303D加速度计/磁力计
Invensense公司MPU 6000 3轴加速计/陀螺仪
MEAS MS5611晴雨表

规格(接口):
1个UART串口
SPEKTRUM DSM / DSM2 / DSM-X®卫星兼容输入
双叶小号BUS®兼容输入/输出
PPM和信号输入
12C
内置micro USB接口

规格(电力系统保护):
理想的动力Muliplexer具有自动限流
所有外设输出为过电流保护

规格(配电电源模块)
安装孔:30毫米*30毫米
重量:5.8克
细胞:4S最大
BEC:3A 5.3V

所有输入ESD保护

规格尺寸:
尺寸:38x43x12mm
重量:15.8克

额定电压:
电源模块输入:4.1〜5.5V
USB电源输入:4.1〜5.5V
伺服轨输入:0〜10V(伺服轨输入由PixFalcon检测)

注:PixFalcon可对电源冗余双如果2个电源供给。 2.导轨:电源模块输入和USB输入。

包括:
PixFalcon微PX4 Autopliot
多输出电缆
RCIN线
安全开关
4PIN线
6PIN电缆
USB电缆
Micro SD卡
M8 GPS
配电电源模块

请手动“文件”选项卡下看到的。

* PX4 / Pixhawk是一个独立的,开放源码,开放硬件项目,旨在提供一个高端的自动驾驶仪的学术,爱好和工业界(BSD许可)

**到APM的参考是指ArduPilot项目,基于Arduino的开源计算平台,通过3DR和开源社区开发对一个家庭的开源自动驾驶仪。它由ArduPilot兆(APM)电子的选择和各种免费软件版本不同的车辆,并通过一个开放源码的创作共用许可的管理。

Product
Specifications

额外信息

  • 商品编号:
    9387000084-0
  • Brand:
  • 重量(g)
    144.00
  • 长度
    110.00
  • 宽:
    45.00
  • 高度:
    75.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Build was nice on this everything worked, and I find the pixhawk documentation adequate. The two major shortcomings here are:
1. There is no input for airspeed, sonar, flow ext.
2. The telemetry output doesn't work with the Standard APM/PX4 style radios, you need the micro telemetry set.

I knew about #1 at purchase time, but not about #2. Be sure to update the firmware when you get it (hard not to do actually)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is an great replacement flight controller for the full size PixHawk. The M8N GPS locks onto satellites quickly and is better than the 6 and 7 versions. I had so many issues with my two 3DR Pixhawks, this FC works almost flawlessly. I wish it had a second telemetry port, but for small quads, this is perfect. You can connect your gimbal pitch and roll signals to the extra motor outputs. There are 8 outputs for motors and servos. The single cable to the GPS module is nice. I recommend this for 250 to 450 quads.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome, complete system. This was my first APM based flight controller, I've since had a few others and this remains my favorite. Reasonably easy to set up, and it has worked flawlessly from day one. GPS gives rock solid position holds, autonomous flights always on the marks. Everything is high quality - board, cables, etc. Definitely my FC of choice when building a new multirotor. Only thing that could make it better would be a matching 4-in-1 ESC with power module!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
No real manual.
Only help scattered around the internet. Internet has mostly questions with no answers.
Error messages and frustration. No fun.
Only for rocket scientists.
Highly disrecommended if you are not into rocket science.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice small package for PX4/Pixhawk in smaller applications. Works well on my 3D printed Peon230 after changing the INS_MPU6K_FILTER parameter to value 42. From there you can set the lowest PID settings allowed under basic setup page and start tuning up from there (or use autotune).
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Manual download now [1247kb]

产品标签

使用空格分隔标签。使用单引号(')标注词组。