注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

道具适配器,以适应4.0毫米电机轴

道具适配器,以适应4.0毫米电机轴

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
69
SKU:
JJ4.0
产品介绍

道具适配器。
而轴双六角头螺钉固定到位道具举办大型螺母。
从阳极氧化合金制成。

Product
Specifications

额外信息

  • 商品编号:
    JJ4.0
  • Brand:
    N/A
  • 重量(g)
    69.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Just excellent, this is much more trustworthy than the collet type ones
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality and cheap price. The aluminum should have been a little bit harder. The shaft is easy to bend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
lo que nesecitaba era esto
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
taylor made, just be sure of the size, it will be plug and play, amazing quality for the money.
Thanks hobbyking!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are not as pictured. I bought this because it shows a hex nut to tighten the prop on the shaft. The one I received has just the spinner with the hole through it. You cannot get these as tight as a hex nut. HK, please update the picture. Other than that, the quality is good. The threads work smoothly and fit well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have received a unit with a 4.9mm diameter hole - it is not suitable for a 4.0mm shaft as published!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OTTIMO, FATTO CON METALLO ROBUSTO MA LEGGERO, LI PREFERISCO A QUELLI A MORSA IN QUANTO TI ESTRAGGONO FACILMENTE CON UNA CHIAVE ESAGONALE E NON SBLILANCIANO L'ELICA.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great for a 4 mm shaft . i will have to cut the hole bigger for most props like apc-e because the holes on the props are smaller that the threaded end
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great little thingstrong and has a grub screw to screw in to the engine
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pesa 13 gramos. Para eje de moor de 4 mm y orificio de la hlice de 6 mm. Muy resistente.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。