40A ESC W / BEC
你自己的4通道TX / RX
I maidened this plane today, and i was Very happy with it's performance.. Not super fast, but quite airobatic.. Exacly what I was looking for :)
At assembly I wasn't as pleased, as the tail-servo is NOT metal geared. I think HK should change the description.
I did not get a sevond prop eighter, though I wonder how one could break the prop..Very good quality of foam.
Stock motor with stock propeller on 3S
14A, 22200 rpm plane speed about 120km/h.
With zippy compact 3S2200 weights about 500g.
I got this half-wing a few weeks ago. It came with only one prop 4.75x4.75 so one is missing. Motor is orange (I like that color ;-). Elevator servo has NO metal gear and is quite slow (aileron servos are faster). Description is wrong.
I assembled it by improving some details:
-wing/ail servos moved on top, not bottom (to avoid damage on landings);
-rear servo installed inside the elevator;
-rudder holes filled with foam;
-some carbon strips glued on rudder arms and fuselage.
Ready to fly weight is 545-550g depending on battery (2200mAh 3s).
At full speed it consumes 18A (on ground, about 200W power). Motor and batt don't get warm at all. It seems there is a good margin to install a bigger or faster prop (just for reference I tested a GWS 7x3.5 which draws 33A, but it flex too much).
I made 3 flights. I'm like a beginner but it's quite easy to fly (2 axis). Plenty of power, more than enough for me.