注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Quanum 2208精密无刷电机万向(GoPro的大小100-200)

Quanum 2208精密无刷电机万向(GoPro的大小100-200)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 19.20
Rating:
Stock:
重量:
72
SKU:
9244000013-0

Price War

产品介绍

你一直在考虑的无刷万向节为您的多旋翼飞行器养活你的内心摄影师的孩子呢?不要被愚弄买了低于标准杆过高套件。你算算,看看这些现成的价值去Quanum无刷电机万向节。它们是预先卷绕为最佳转矩和光滑度和两种尺寸拾取的两个最常见的类摄像机。他们都配备了伺服式的连接器和软电缆,适用于大多数无刷控制器万向即插即用兼容性,如我们在下面提供的之一。建立你的万向节在第一时间,一是匹配高质量的零部件诗一般的万能工具包,将损害不必要的重量和平衡能力差整体表现为特定的相机你的框架,并绕过了困扰套件级组件的质量问题。把你的设置与Quanum质量更上一层楼。

在2208是一个GoPro的相机类(100-200)的完美尺寸。它有一个极好的飞度和芬兰,并设计有方便地集成到您的建立一个精干的轮廓。对于坡免费精度2208已经预装轴承座,和14杆的超平滑运动(最高为这种规模的电机之一)。在2208无刷电机万向节是完美的升级到套件安装,或用于DIY定制万向节的基础。无论您使用中,如果需要稳定其Quanum无刷电机万向均达到了任务。

眼镜:
摄像头范围:100-200克 (GoPro的大小)
波兰人:14P12S
KV:114
待机电流安培:.03A
阻力:23mh欧姆
重量:39克
电压:6-14volts(2-3单元lipoly)
下背部安装:16 *19毫米
上顶部安装:12毫米孔对孔
连接:3线伺服式接口190毫米长引线
安装螺纹:M3

Product
Specifications

额外信息

  • 商品编号:
    9244000013-0
  • Brand:
    Quanum
  • 重量(g)
    72.00
  • 长度
    95.00
  • 宽:
    45.00
  • 高度:
    55.00
  • 千伏(转/ v)的
    114.00
  • 最大电流( A)
    0.00
  • 功率(W):
    0.00
  • 长度B (毫米):
    24.00
  • 可以长深(mm )
    12.00
  • 最大电压(V)
    0.00
  • 轴(MM):
    3.17
  • Unit Weight (g):
    39
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    26.00
  • 电阻( MH):
    23.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Great motors for my 3D printed TBS Disco gimbal. Once tuned, these motors held solid even in gusty winds. I've been using these motors for around 50 flights so far without issue.
Quality
Value
Overall
Quality
Value
Overall
Good motor from quanum. Please make sure how many scre holes youe gimbal require to mount the motor. Mine was 3 from one anf 4 form the other one. I simply used old motor body and shaft as it turned out ot be identical :)
Quality
Value
Overall
Quality
Value
Overall
Pros:
*They work
* Not too expensive
* Look nice.

Cons:
* The design is too high, not pancake enough.
It's a general purpose motor just rewound for gimbal use.
* The motor top mounting surface diameter is too small & uses M2 screws
This is not a motor designed from scratch as a gimbal motor.
* The lead and motor wire connections are poorly soldered and supported.
* Lead wire are poorly supported where they exit the frame.
Again, the mechanical design is not a good gimbal motor one.

YOU SHOULD REINFORCE THE LEAD WIRES attachment to the motor frame with CA and some filler material, or expect them to break.
Quality
Value
Overall
Quality
Value
Overall
Great motor so far. Replaced a 2208 iPower motor. But nicer finish and smoother operation. Will report back after some testing.
Quality
Value
Overall
Quality
Value
Overall
Not recommended. In 1 of 3 motors I've ordered stator had contact with some of the magnets. And then 'servo' wires broke off from the stator (which is basically not possible to fix). I've reinforced the connection with some CA on the 2 another motors.

You were warned. You will be better off with Turningy 2212 motors.
Quality
Value
Overall
Quality
Value
Overall
Good build precision motor great for gimball building and cheap i could not find anny flaws on this motor
Quality
Value
Overall
Upload
Videos
  • Quanum Gimbal Motor

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。